Nickel Soft-Close Hinge For Full Overlay Face-Frame and Frameless Cabinets

The Salice 100 Series Silentia hinge brings soft-close damping to full overlay doors on both face-frame and frameless cabinets, with a screw-on mount and a nickel finish that coordinates with a wide range of hardware.

Key Features

• Silentia soft-close damps the door through the final closing arc so it settles quietly against the cabinet.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• 105 degree opening angle gives solid, unobstructed access for everyday use.
• Screw-on mounting fastens directly to the cabinet side or face-frame stile for a secure, fixed connection.
• Height and side adjustment lets you dial in an even reveal after installation without removing the door.
• Nickel finish on steel resists everyday wear and pairs cleanly with satin and polished nickel hardware throughout the space.

Where This Hinge Works

This is a full overlay hinge, meaning the door covers almost the full width of the cabinet side panel or face-frame opening, with only a slim reveal at the edge. That geometry suits the large majority of modern kitchen, bath, and utility cabinet runs, where doors close on a shared partition or a single-door box. The 35mm cup bores into the back of the door, and the arm mounts to a separate base plate on the cabinet, which is sold separately. Plates are Salice-specific, so pair this hinge with a matching Salice plate for your cabinet construction. On frameless boxes the plate screws to the side panel; on face-frame cabinets it attaches to or behind the stile.

Steel Build and a Finish That Coordinates

The hinge body is steel in a nickel finish. Nickel reads cleanly against white, gray, and natural wood cabinets, and it matches satin nickel pulls, knobs, and other visible hardware without pulling attention to the hinge itself. Since the hinge is concealed when the door is closed, the finish matters most on open-shelf displays, glass-door adjacent runs, and furniture pieces where the hinge is visible at full swing. The Silentia damping mechanism is integrated into the hinge, so no separate soft-close adapter is needed.

A Good Fit For These Projects

Builders and cabinet shops specifying a mid-range concealed hinge with quiet-close performance will find this a practical choice across both frameless and face-frame work. The screw-on mount suits production environments and renovation installs where system holes are not always present, because it goes directly into wood without depending on pre-drilled 5mm holes. Homeowners upgrading existing cabinets will also appreciate that no special boring is needed for the plate side. For doors in the standard 16 to 22mm thickness range, this hinge fits without modification. If the project calls for a different finish to match existing hardware, this hinge is available in other finishes within the same series.

Common Questions

Quiet, Even Doors on Every Run

Specify this hinge when the job calls for full overlay doors that close without noise, mount without system holes, and finish in nickel to coordinate with the rest of the hardware.