Salice Concealed Hinge in Nickel for Full Overlay Doors

This Salice 100 Series hinge hangs full overlay doors with Silentia soft-close and a dowel-mount cup on both face-frame and frameless cabinets. The nickel finish coordinates with satin and brushed metal hardware across the rest of the kitchen or bath.

Key Features

• Silentia soft-close damps the door over its final closing arc so it settles quietly without slamming.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• 105 degree opening angle gives practical everyday access while keeping swing geometry in check on tighter installations.
• Dowel-mount cup presses into pre-bored dowel holes in the door for fast, accurate positioning on CNC-bored stock.
• 35mm cup with 45mm bore pattern seats in a standard cup hole and matches common boring setups across production and custom shops.
• Works on face-frame and frameless cabinets when paired with the matching Salice base plate, sold separately.

Where This Hinge Does Its Work

Full overlay is the most common door configuration in modern cabinetry: one door covers most of the cabinet side, with a narrow gap to the adjacent door or the cabinet edge. This hinge is built for that application on both frameless boxes and face-frame cabinets. The dowel-mount cup is at home in CNC-bored production runs, where the pre-bored dowel holes register the cup position precisely and remove the cup-screw step from the install. The 35mm cup bores into the door back and the arm connects to a Salice base plate mounted to the cabinet, which is ordered separately. Plate selection depends on your cabinet construction and the overlay position you need.

Nickel Finish on Steel Construction

The hinge body is steel with a nickel finish. Nickel is a natural match for brushed or satin hardware families, so it sits well on cabinets where pulls, knobs, and other visible metal run in the same tone. The Silentia soft-close mechanism is integrated into the hinge, not a clip-on add-on, which keeps the profile clean and removes one part from the accessory list. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5mm to minus 1.5mm let you dial in an even reveal after the cabinet is in place.

The Right Fit for This Hinge

This hinge suits cabinet shops and contractors running CNC-bored door stock who want a clean nickel finish without specifying a separate soft-close adapter. It also works for custom builders and designers who are coordinating hardware finishes across a project and need a concealed hinge that holds its own alongside satin-metal pulls and knobs. Designers specifying for renovation projects will find the face-frame compatibility useful: the same hinge works on an older framed box as on a new frameless build. Standard door thickness for this hinge runs from 16 to 22mm. For doors outside that range, a thick-door or thin-door hinge is the right call. A Salice base plate matched to your cabinet type is required to complete the installation, and plates from other brands will not connect to this hinge arm.

Common Questions

Quiet, Finished Doors That Coordinate Across the Room

When the finish plan calls for nickel and the door stock comes off a CNC, this hinge covers both requirements: integrated Silentia soft-close, a dowel-mount cup ready for pre-bored doors, and a nickel finish that holds the hardware palette together.