Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Salice Series 100 concealed hinge hangs inset doors flush inside the cabinet opening on face-frame or frameless cabinets, with Silentia soft-close built in and an expanding-dowel mount for a secure press-in installation.
Inset doors sit inside the cabinet opening rather than in front of it, leaving a small, uniform reveal on every edge. That gap is the design detail the hinge has to protect. The full crank arm on this hinge carries the geometry that lets the door swing clear of the frame on a 105 degree arc without catching the cabinet front. The 35mm cup bores into the back of the door at the standard depth, and the hinge connects to a Salice base plate on the cabinet, which is sold separately. Use Salice plates matched to this series; plates are brand-specific and a plate from another brand will not engage this hinge correctly.
The hinge is plated steel finished in nickel, a neutral tone that sits well behind inset doors where the hardware rim can be seen along the inside edge of the opening. Inset work puts a door close to its frame on every side, and that tight geometry is exactly where Silentia earns its place: the damper absorbs the closing energy so the door settles into its gap rather than jarring it. Over years of use, that cushioned close is what keeps the reveal consistent and the door face unmarked.
This is the hinge for cabinetmakers and finish carpenters building flush inset doors on face-frame or frameless boxes where a nickel finish coordinates with the room's other hardware. The expanding-dowel mount suits shops with CNC boring setups, pressing in cleanly without the alignment uncertainty of hand-driving cup screws. The Series 100 is Salice's lighter-door line at 105 degrees, so it fits standard-weight inset doors in kitchens, baths, and built-in casework. For heavier doors or where a full 110 degree swing is needed, step up within the Salice range.
Yes. This hinge body mounts to a Salice base plate that attaches to the cabinet, and the plate is sold separately. Use a Salice plate matched to your cabinet construction. Plates are not interchangeable across brands.
The expanding dowel is a fastener pre-mounted to the hinge that presses into a bored hole in the cabinet side and expands to grip it mechanically. It gives a firm connection without driving screws at the cup and suits production shops with boring equipment.
A full overlay door covers nearly the entire cabinet side. An inset door sits inside the opening with a small gap on all four sides. The two use different arm geometries and are not interchangeable, so confirm your door style before selecting a hinge.
Hinge count depends on door height and weight. As a general guide, doors up to about 40 inches typically use two hinges, and taller doors use three or more. Consult the Salice load table for your door's exact dimensions and weight.
Specify this hinge when the design calls for inset doors that close softly, sit square inside their openings, and carry a nickel finish that ties back to the rest of the room's hardware.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 3000 Each |  UBS2XX85H9 Mfr# S2XX85H9 | Flange Cover Cap, Nickel | ||||
Sold in: 1 Each |  UBS2XX86BT Mfr# S2XX86BT | Silentia Hinge Spacers 0.6mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBS2XX86AT Mfr# S2XX86AT | 1.2mm Spacer for Silentia Series Hinges | ||||
Sold in: 1 Each |  UBS2XX86KT Mfr# S2XX86KT | Silentia Hinge Spacers 1.8mm Height For Silentia 110 Deg Hinges | ||||
Sold in: 1 Each |  UBD1A6ACGSN Mfr# D9A6AC3SN | Silentia Hinge Cup Depth Gauge 12 mm | ||||
Sold in: 1 Each |  UBD2ABACGSN Mfr# D2ABACGSN | Silentia Hinge Cup Depth Gauge 15.5 mm | ||||
Sold in: 1 Each |  UBS1E637XY Mfr# S1E637XY | Salice Series 100 & 700 Hinge Stop Device S1E637XY |