Salice 100 Series Logica Hinge For Controlled Closing
Salice 100 Series Logica hinge gives you a concealed cabinet hinge with an integrated Silentia+ soft-close mechanism, so doors close in a controlled way and reduce impact on the cabinet structure during everyday use. The Silentia+ system uses twin silicone-oil dampers housed in the hinge cup, which manages the closing speed and protects both the door and the face-frame or frameless cabinet from repeated slamming. An innovative soft-close adjustment switch on the hinge lets you delay the decelerating action, so you can tune the closing strength to match different door sizes and weights on a job. A 105 degree opening angle gives doors wide access to the cabinet interior, which helps during installation, adjustment, and later access to hardware or stored items. This hinge is designed as a concealed cabinet hinge, so it keeps the front of the cabinet clean while providing reliable motion at the hinge side.
Key Salice Hinge Details That Support Cabinet Work
- The Silentia+ integrated soft-close mechanism with twin silicone-oil dampers slows the door near closing, which reduces door bounce and improves the feel of the installation.
- The innovative switch to delay decelerating action adjusts soft-close strength, so you can match the hinge response to doors of different sizes and materials on the same project.
- The 105 degree opening angle allows the door to swing wide, which improves access for fitting interiors, adjusting hinges, and loading or unloading the cabinet.
- The 12 mm hinge cup boring depth sets a predictable drilling depth, which helps with repeatable cup boring on production equipment or jigs.
- The edge bore distance (K) from 3 mm to 6 mm gives a workable range for drilling near the door edge, so you can tune overlay and gaps within the recommended geometry.
- The hinge supports up to 21 mm overlay, which provides flexibility in designing face-frame or frameless cabinet reveals within that overlay range.
- Compatibility with all Series 200 mounting plates lets you use existing Salice patterns, which simplifies layout when matching other Salice hinges in the same kitchen or bank.
- The standard 45 mm x 9.5 mm Salice boring pattern matches Salice jig layouts, which streamlines boring setup and reduces layout time.
- Suitability for door thickness up to 25 mm supports a wide range of door constructions, so thicker doors still stay within the hinge design envelope.
- The hinge exceeds ANSI/BHMA A156.9-2010 standards and carries a lifetime warranty, which supports long-term performance expectations in residential or commercial cabinet installations.
Logica Hinge Mounting And Boring Considerations
This Salice 100 Series Logica concealed cabinet hinge uses a 12 mm hinge cup boring depth, so boring operations can be set consistently across doors using standard 12 mm bits or CNC programs. The edge bore distance (K) from 3 mm to 6 mm gives you room to fine-tune door position relative to the cabinet edge while staying inside Salice geometry. A standard 45 mm x 9.5 mm Salice boring pattern aligns with common Salice drilling jigs and line-boring equipment, which shortens setup time and keeps hinge cups square and repeatable. Compatibility with all Series 200 mounting plates means the hinge interfaces with existing Salice plate installations that use that system, so replacements or upgrades to Silentia+ soft-close can be done while keeping the same plate interface on the cabinet.
Using This Silentia Hinge In Real Cabinet Projects
Where This Salice 100 Series Logica Hinge Fits Best
The SAP description identifies this product as a 105 DEG LOGICA HINGE, INSET, SOFT-CLOSE, which defines it as a concealed hinge solution for inset applications that need soft-close motion. Salice lists it within concealed cabinet hinges and European concealed long arm hinges, so it is suited to casework where a European-style hinge layout is preferred but the door sits inset relative to the cabinet front. The ability to work with overlays up to 21 mm offers flexibility in designing frameless or face-frame layouts within that overlay range, allowing you to balance reveals with door thickness up to 25 mm. Because the Silentia+ mechanism is integrated in the hinge cup, you gain soft-close behavior without adding separate dampers, which keeps the hinge area clear and preserves the concealed look on both residential and commercial cabinet runs.
How Silentia+ And Geometry Support Consistent Results
The Silentia+ integrated soft-close mechanism uses twin silicone-oil dampers in the hinge cup, which creates a controlled deceleration as the door nears the cabinet, improving the perceived quality of the motion on every cycle. The innovative switch to delay the decelerating action adjusts the soft-close timing, so a single hinge type can be tuned on site for light or heavier doors, reducing the need to change hinge models to handle different applications within one project. A 105 degree opening angle provides enough swing for comfortable access without overextending the door, which helps limit stress at the hinge arm and cabinet attachment over time. Edge bore distance (K) from 3 mm to 6 mm and the standard 45 mm x 9.5 mm Salice boring pattern create a predictable geometry that supports precise alignment, so reveals and gaps can be dialed in with less rework. Exceeding ANSI/BHMA A156.9-2010 standards together with a lifetime warranty indicates that the hinge is engineered for long service life, which supports repeatable performance in high-use environments such as kitchens, shops, or commercial casework.
Common Questions About The Salice C1J6PE9 Hinge
What type of hinge is the Salice C1J6PE9 model?
The Salice C1J6PE9 model is a Series 100 Logica concealed cabinet hinge with Silentia+ integrated soft-close, so it provides hidden mounting and controlled closing on cabinet doors.
How far does this Silentia hinge allow the door to open?
This Silentia hinge provides a 105 degree opening angle, which lets the door swing wide enough for comfortable cabinet access and hinge adjustments without overextending the door.
What boring depth and pattern does this hinge require?
The hinge uses a 12 mm cup boring depth and a standard 45 mm x 9.5 mm Salice boring pattern, which helps align with Salice drilling jigs and consistent production setups.
What door thickness and overlay range does this hinge support?
The hinge is designed for door thickness up to 25 mm and supports up to 21 mm overlay, giving flexibility in designing reveals within those limits.
Is the soft-close action on this hinge adjustable?
The hinge features a Silentia+ integrated soft-close mechanism with an innovative switch to delay decelerating action, so closing strength can be tuned for different door sizes.
Which mounting plates work with this Salice 100 Series hinge?
This Salice 100 Series hinge is compatible with all Series 200 mounting plates, allowing use with existing Salice plate layouts on cabinets.
Selecting This Hinge For Your Next Cabinet Run
The Salice 100 Series Logica hinge with Silentia+ soft-close, 105 degree opening, and compatibility with Series 200 mounting plates gives cabinet builders a concealed hinge that supports inset layouts and adjustable soft-close performance. The 12 mm cup depth, 45 mm x 9.5 mm boring pattern, K range from 3 mm to 6 mm, and support for door thickness up to 25 mm provide a defined geometry that suits both shop production and careful retrofit work. For projects that call for concealed motion control with long-term durability backed by a lifetime warranty, this hinge offers a consistent, standards-exceeding solution ready to integrate into your cabinet program.
