Hickory Hardware Twist Series 3 inch pull gives cabinets a defined 3 inch center to center grip point, which sets consistent handle spacing and keeps layouts uniform across doors and drawers. The Twist collection design evolved from organic lines found in nature and contemporary architecture, so the pull brings a flowing look that suits both modern and transitional projects. Its harmonious twist and undulating curves create luminous contours that catch light, adding visual depth across a run of fronts. The pull measures 3-5/8 inch in overall length, so it spans a bit beyond the 3 inch drill pattern to visually balance typical cabinet rail widths. A 1-1/8 inch projection sets the hand clearance off the face, which helps fingers grab from above or below without contacting the surface. The 5/8 inch width concentrates the profile, giving a slimmer grip that works well on smaller doors and drawer fronts.
The 3 inch center to center dimension sets the hole spacing for this pull, which aligns with a common cabinet drilling pattern and simplifies layout across multiple fronts. With an overall length of 3-5/8 inch, the handle slightly overhangs the mounting points, which visually lands the grip between rail edges on many standard-width doors and drawers. A 1-1/8 inch projection keeps the pull far enough off the face for fingers to wrap behind, supporting comfortable daily operation without rubbing the cabinet surface. The 5/8 inch width defines a slimmer bar profile, which helps this pull sit proportionally on smaller doors and narrower drawer fronts. As decorative hardware classed as a handle and pull, it is intended to mount to cabinet faces where a fixed grasp point is required for opening and closing.
The Elusive Golden Nickel finish on this Hickory Hardware Twist Series 3 inch pull provides a specific golden nickel tone that fits projects calling for warm metallic cabinet hardware. Because it belongs to the Twist collection, the pull can be used alongside other Twist pieces to carry the same twisted profile across a full room of cabinetry. The 3 inch center to center measurement aligns with a widely used drilling standard, so it matches layouts where 3 inch hardware is specified on doors and drawers. At 3-5/8 inch total length, the pull works well on typical kitchen and bath cabinet rails, offering enough visual presence without overwhelming narrow stiles. Its 5/8 inch width keeps the handle visually light, which suits smaller vanity doors or upper wall cabinets where bulkier pulls might dominate the face.
The defined 3 inch center to center spacing on the H076015-EGN Hickory Hardware pull supports repeatable drilling, which helps installers keep rows of pulls aligned and level from cabinet to cabinet. A 1-1/8 inch projection sets the grip off the surface at a consistent distance, promoting the same finger clearance on every door and drawer fitted with this model. The Twist collection design, shaped from organic lines and contemporary architecture, ensures each pull in the set shares the same twisted contour, which maintains visual continuity when multiple cabinets are installed in one run. Elusive Golden Nickel finish on a zinc material base creates a uniform surface appearance across pulls from the same part number, reducing variation when several handles are mounted close together. Classification under decorative hardware handles and pulls defines its role as the primary touch point on cabinet faces, giving projects a dedicated place for users to grab and operate each front.
The Hickory Hardware Twist Series 3 inch pull has a 3 inch center to center measurement, which sets the exact hole spacing pattern used when mounting it to cabinet doors or drawers.
The H076015-EGN cabinet pull measures 3-5/8 inch in overall length, so the handle extends slightly beyond the 3 inch mounting points for balanced coverage on typical cabinet rails.
The Elusive Golden Nickel cabinet pull projects 1-1/8 inch from the mounting surface, setting consistent finger clearance for gripping without contacting the cabinet face during use.
The Hickory Hardware Twist pull has a 5/8 inch width, giving it a slimmer grip profile that suits smaller doors and drawer fronts while staying comfortable to grasp.
The Belwith Keeler Twist collection pull is made from zinc, providing a solid metal base under the Elusive Golden Nickel finish for a consistent decorative hardware surface.
The H076015-EGN Twist collection pull uses an Elusive Golden Nickel finish, allowing projects to match this specific golden nickel tone across cabinet hardware on the same job.
The Hickory Hardware Twist Series 3 inch pull, part number H076015-EGN, combines a 3 inch center to center pattern with a 3-5/8 inch overall length to serve common cabinet layouts. Its Elusive Golden Nickel finish and Twist collection profile give projects a consistent visual theme wherever this handle is installed. With 1-1/8 inch projection and 5/8 inch width, the pull balances clearance and scale on a range of cabinet doors and drawers. For jobs calling for a defined 3 inch hardware line in a golden nickel tone, this Belwith Keeler decorative handle offers a focused solution.
Sold In: 1 Each
