Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Twist 12 inch pull is a satin nickel handle from the Twist collection designed for cabinets and similar casework. The collection evolved from organic lines found in nature and contemporary architecture, so the pull uses a harmonious twist and undulating curves that create luminous contours on the face. That design gives doors and drawers a consistent visual line across multiple fronts. The pull measures 12 inches center to center, so hole boring aligns with a 12 inch spread on doors or drawer fronts. The overall length of 12-11/16 inches keeps some material beyond the screw centers, which helps cover existing 12 inch on-center bores. A projection of 1-1/4 inches stands the grip off the surface, giving fingers clearance during daily use. The 5/8 inch width establishes a lean profile while still defining a clear grip area.
The 12 inch center to center measurement sets the distance between the mounting holes, so a 12 inch boring jig or layout line can be used repeatedly across multiple fronts. The overall length of 12-11/16 inches provides edge coverage beyond the mounting points, which can help visually cover a slightly oversized or worn bore around the screw locations. With a projection of 1-1/4 inches, the pull extends off the face enough to clear typical cabinet door and drawer fronts during gripping and pulling. The 5/8 inch width keeps the handle visually narrow while maintaining a defined gripping edge, so it suits doors where a slimmer pull is preferred. Together, these dimensions give a predictable footprint, which supports consistent spacing and alignment on long runs of cabinetry.
The Twist collection design comes from organic lines and contemporary architecture, so this pull works well on modern, transitional, and updated traditional cabinet runs. The 12 inch center to center spread suits wider drawers or taller doors where a longer pull looks proportionate to the front. The satin nickel finish introduces a muted metallic tone that coordinates with many common satin nickel hinges, knobs, and plumbing fixtures, helping different hardware elements read as one system. With an overall length of 12-11/16 inches, the pull visually anchors large fronts, adding a clear horizontal or vertical line depending on orientation. The 5/8 inch width and 1-1/4 inch projection combine to create a slim, stand-off grip that fits comfortably without adding bulk to the face of the cabinet.
The 12 inch center to center dimension on the H076021-SN satin nickel pull lets installers use a single, repeatable boring pattern across multiple drawer banks, which speeds layout on new work. The specific overall length of 12-11/16 inches helps when aligning multiple pulls on a long run, because each handle occupies the same visual length on the face, supporting clean, straight sightlines. A projection of 1-1/4 inches sets a predictable stand-off from the door or drawer, aiding in clearance planning when fronts open near surrounding trim or adjacent cabinets. The 5/8 inch width gives a consistent grip bar thickness, which helps keep doors and drawers feeling uniform from one cabinet to the next. The zinc material, paired with the Twist collection profile, provides a solid metal handle shape that stays consistent from pull to pull, supporting a coordinated look throughout a room.
The Hickory Hardware Twist 12 inch pull has a 12 inch center to center measurement, so the mounting holes are spaced 12 inches apart for layout and drilling.
The H076021-SN pull has an overall length of 12-11/16 inches, a projection of 1-1/4 inches, and a width of 5/8 inch, defining its footprint on the cabinet face.
The Twist 12 inch pull is made from zinc, providing a solid metal construction suitable for repeated use on cabinet doors and drawers.
This pull has a satin nickel finish, giving a soft, brushed metallic appearance that coordinates with many satin nickel fixtures and cabinet components.
The Twist collection uses harmonious twists and undulating curves that create luminous contours, adding a flowing, contemporary detail across cabinet doors and drawers.
The H076021-SN part number identifies this specific Twist collection 12 inch center to center satin nickel pull from Belwith Keeler for ordering and project planning.
The Hickory Hardware Twist 12 inch pull pairs a 12 inch center to center dimension with a 12-11/16 inch overall length, giving a defined footprint for wide drawers and tall doors. Its zinc construction and satin nickel finish provide a consistent metal handle in the Twist collection profile. With a 1-1/4 inch projection and 5/8 inch width, the pull offers a predictable grip that repeats cleanly across multiple cabinet fronts. For projects built around 12 inch spreads and a satin nickel look, this H076021-SN pull aligns visual design with clear mounting measurements.
Sold In: 1 Each
