Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Twist Series pull is a zinc cabinet handle from Belwith Keeler designed for projects that call for a defined 3 inch center to center layout. The Twist collection design evolved from organic lines found in nature and contemporary architecture, so its harmonious twist and undulating curves give doors and drawers a consistent visual flow. The black iron finish provides a dark, uniform appearance that supports a coordinated hardware look across a run of cabinets. With a length of 3-5/8 inches, this pull spans slightly beyond a 3 inch drill pattern, giving a balanced grip area. A projection of 1-1/8 inches sets the hand clearance off the surface, which helps fingers clear the cabinet face during everyday use. The 5/8 inch width creates a defined edge line that reads cleanly across both framed and frameless cabinet fronts.
The 3 inch center to center cabinet pull dimension on H076015-BI defines the mounting hole spread, which streamlines layout when using standard jigs or templates sized for 3 inch hardware. With a total length of 3-5/8 inches, the pull offers visible coverage beyond the drilled holes, giving a finished look on both narrow and moderate-width drawer fronts. The 1-1/8 inch projection locates the gripping surface forward from the door or drawer face, which supports comfortable reach when the cabinet front has trim or thicker edge profiles. A 5/8 inch width keeps the pull compact on smaller fronts, which helps maintain proportion on bath vanities, upper cabinets, or narrow utility doors.
The black iron cabinet pull finish on the H076015-BI pairs with designs that call for a dark, continuous hardware line, which suits kitchens, baths, or shop cabinets using similar black iron finish components. The Twist collection heritage in organic lines and contemporary architecture shapes the pull with a flowing twist, which helps it bridge between traditional and more modern cabinet styles in mixed projects. With a 3 inch center to center layout, this Belwith Keeler cabinet pull aligns with common retrofit dimensions, which supports using it on cabinet runs already drilled on a 3 inch spread. The 3-5/8 inch length makes the pull suitable for doors and smaller drawers where a compact, defined handle is preferred, which keeps hardware from visually dominating narrow fronts. The zinc construction gives the pull a metal heft that matches other decorative hardware and moldings, which keeps the hardware family consistent when combining handles and pulls within the same space.
The 3 inch center to center cabinet pull spacing on H076015-BI lets installers rely on standard 3 inch drilling patterns, which helps maintain straight sightlines across long cabinet banks. The 1-1/8 inch projection positions the gripping surface away from the cabinet face, which helps hands clear raised panel profiles or door edge details during operation. A 5/8 inch width keeps the profile narrow, which allows the pull to sit comfortably on rail sections without crowding adjacent design elements. The 3-5/8 inch overall length keeps each handle compact, which can simplify layout when aligning multiple pulls on smaller drawer stacks. The black iron cabinet pull finish presents a uniform dark tone across the handle, which helps minor alignment variances read less prominently against darker door and drawer fronts. As part of the Twist collection, the repeated twist motif guides visual alignment from pull to pull, which supports a cohesive look when hardware is installed across an entire room.
The H076015-BI pull has a 3 inch center to center dimension, which sets the hole spacing for mounting on cabinet doors and drawers.
The Hickory Hardware Twist Series pull measures 3-5/8 inches in overall length, which gives coverage slightly wider than the 3 inch mounting spread.
The black iron cabinet pull has a projection of 1-1/8 inches, which sets the gripping surface off the cabinet face for finger clearance.
The H076015-BI handle is 5/8 inch wide, which keeps the front profile slim while still providing an edge for the hand.
The Twist collection pull is made from zinc, which provides a solid metal construction suited to decorative cabinet hardware.
This Belwith Keeler pull uses a black iron finish, which delivers a dark, consistent appearance across the handle surface.
The Hickory Hardware Twist Series pull with 3 inch center to center spacing, 3-5/8 inch length, and 1-1/8 inch projection gives cabinet projects a defined layout using a known drill pattern. The black iron finish and Twist collection design provide a consistent visual language across doors and drawers, which supports cohesive hardware planning. For work that calls for a compact, zinc pull from Belwith Keeler in a dark finish, H076015-BI aligns form, dimensions, and finish into a straightforward cabinet handle choice.
Sold In: 1 Each
