Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Twist Series pull brings the Twist collection design to cabinet and furniture projects with a defined 3-3/4 inch center to center mounting, giving installers a clear drilling layout that speeds up repeatable handle placement across multiple doors and drawers. The undulating curves described in the Twist collection create a formed grip area, which helps hands find a consistent pull point on doors and drawers during everyday use. The pull length of 4-7/16 inches provides a proportional handle span to the 96 mm mounting spread, which keeps the fastener load path balanced across the front of the cabinet. A projection of 1-1/16 inches sets the handle off the face of the door, leaving knuckle room between the hardware and the surface so doors can be operated without fingers rubbing the finish. A width of 5/8 inch gives the Twist profile a defined edge, which helps with alignment by giving a straight reference line when lining up multiple pulls in a row.
The 3-3/4 inch (96 mm) center to center layout on this Belwith Keeler cabinet pull gives a fixed distance between mounting points, which helps when transferring measurements from templates or existing hardware on retrofit jobs. The 4-7/16 inch overall length leaves visible metal on each side of the mounting holes, which maintains a balanced look when the pull is centered on typical cabinet stiles or drawer fronts. A projection of 1-1/16 inches moves the gripping surface away from the cabinet face, letting fingers wrap behind the pull without contacting the door, which can reduce finish wear around the hardware area. The 5/8 inch width provides a slim but defined bar, helping installers visually square the pull to door edges during installation. The zinc construction supports firm fastening at the mounting points, which is important when the pull is used on frequently operated doors and drawers.
The Hickory Hardware Twist Series pull from the Twist collection is designed for use on cabinet and furniture fronts where a decorative handle is needed, giving projects a consistent hardware look across doors and drawers. The Elusive Golden Nickel finish adds a controlled golden nickel tone to these installations, which can help tie together other Elusive Golden Nickel components in the same room. With a center to center measurement of 3-3/4 inches, or 96 mm, this pull fits layouts built around that drilling pattern, allowing it to be used across banks of doors that share the same spacing. The 4-7/16 inch length spans a useful portion of typical cabinet fronts, which helps users comfortably grasp the pull when opening base or wall cabinets. A projection of 1-1/16 inches and width of 5/8 inch keep the handle profile compact, which is helpful in tight kitchen or bath runs where doors and drawers are close together.
The defined 96 mm center to center dimension on this H076016-EGN Twist collection pull lets installers repeat hole spacing from one cabinet to the next, supporting straight hardware lines across a full elevation. The overall length of 4-7/16 inches gives enough bar length beyond the holes to visually center the pull on narrow or wider fronts, which simplifies layout choices when cabinets vary in size. A 1-1/16 inch projection holds the gripping area off the surface, creating clearance that can reduce contact between fingers and the door finish over time. The 5/8 inch width offers a slim face that still reads clearly against the cabinet, which helps align multiple Belwith Keeler cabinet pulls along a rail or stile by eye. The zinc material provides a solid base for the Elusive Golden Nickel finish, helping the twist and undulating curves show their luminous contours under room lighting on finished cabinetry.
The Hickory Hardware Twist Series pull has a 3-3/4 inch, or 96 mm, center to center, which sets a precise mounting spread for drilling and aligns with common cabinet hardware layouts.
The H076016-EGN Twist collection pull has an overall length of 4-7/16 inches, providing bar length beyond the mounting holes for a balanced look on cabinet and drawer fronts.
The Elusive Golden Nickel pull is made from zinc, giving the handle a solid metal body that supports firm fastening on frequently used cabinet doors and drawers.
This Belwith Keeler cabinet pull projects 1-1/16 inches from the door surface, creating space for fingers to grip behind the pull during normal cabinet operation.
The Twist collection pull has a width of 5/8 inch, offering a slim but defined face that assists with visual alignment along cabinet edges.
This Hickory Hardware Twist Series pull uses an Elusive Golden Nickel finish, which highlights the twist and undulating curves to create luminous contours on cabinet fronts.
The Hickory Hardware Twist Series pull with 3-3/4 inch (96 mm) center to center sizing gives a defined mounting pattern for cabinet and furniture projects planned around that spread. The Elusive Golden Nickel finish and Twist collection curves supply a coordinated visual statement when repeated across a run of doors and drawers. With zinc construction, 4-7/16 inch overall length, 1-1/16 inch projection, and 5/8 inch width, this H076016-EGN pull offers a known set of dimensions that support consistent layout, drilling, and day-to-day operation on decorative hardware installations.
Sold In: 1 Each
