Hickory Hardware Rotterdam pull gives cabinets a straight, modern grip that suits busy installations. This Belwith Keeler handle from the Rotterdam collection uses crisp lines and a smooth texture to deliver a pull that feels solid in the hand and reads clean on the door or drawer face.
The 5 inch center to center sizing defines the drilling layout, so you can line up handle locations across banks of doors with a consistent measurement. Its overall 5-3/4 inch length gives the pull a little overhang past the hole spread, which visually balances wider drawer fronts and taller doors.
The satin nickel finish provides a muted metallic look that works with many hinge and faucet finishes, helping one pull style carry through a whole room. A zinc construction keeps the handle in a familiar weight range for everyday cabinet hardware, supporting a standard feel when opening and closing doors over time.
The 5 inch center to center dimension on this Rotterdam series cabinet pull gives you a clear drilling mark to work from, which supports straight rows when aligning multiple pulls across upper and lower runs. The 5-3/4 inch overall length means the handle extends beyond the screw points, so you can position it comfortably on wider drawer fronts without losing visual proportion.
A 1-3/16 inch projection defines how far the pull stands off the door or drawer face, giving you a predictable standoff when working near adjacent walls or appliances. With a 5/8 inch width across the front of the pull, you can anticipate how it will sit on narrow rails or stile edges and select placement that keeps the handle centered on the available framing.
This P3111-SN satin nickel pull belongs to the Rotterdam collection, so it suits projects where a single, crisp style needs to run across doors and drawers in kitchens, baths, or built-ins. The 5 inch center to center sizing fits layouts built around that common drilling pattern, letting the same measurement repeat from cabinet to cabinet.
On taller doors, the 5-3/4 inch overall length keeps the handle visually present without dominating the panel, which supports layouts that favor clean lines rather than oversized hardware. On drawer banks, that same length gives a comfortable grip span, especially when drawers are loaded and see frequent opening and closing during daily use.
The satin nickel finish positions this pull for spaces that already lean toward nickel-toned fixtures, tying in with many hinges and plumbing components. Because the finish is satin rather than highly polished, it offers a more restrained look that can work in both residential and commercial woodworking applications that call for understated cabinet hardware.
The 5 inch center to center measurement on this Hickory Hardware Rotterdam pull allows jigs and templates set to that spacing to be reused across an entire job, supporting consistent hole placement from one cabinet box to the next. That repeatability helps doors and drawers line up visually, with each pull sitting at the same offset from edges and rails.
The defined 1-3/16 inch projection gives a fixed standoff from the door face, which can be factored in when setting reveals near walls, tall pantry panels, or adjacent cabinet runs. Knowing that projection up front helps avoid tight clearances where handles might otherwise sit too close to neighboring surfaces.
The 5/8 inch width offers a predictable face dimension, allowing you to relate handle width to stile or rail size when laying out shaker or slab fronts. When the pull width and rail width work together, drawer and door fronts tend to present a balanced, intentional look that aligns with the straight lines suggested by the Rotterdam series design.
The zinc construction keeps the pull in line with common decorative hardware materials, so its weight and feel match expectations for everyday cabinet use. Combined with the satin nickel finish, those material details support a handle that integrates into standard woodworking projects supplied through Wurth Baer Supply.
The Hickory Hardware Rotterdam pull has a 5 inch center to center dimension, which sets the precise hole spacing for drilling and aligns the handle consistently across multiple cabinet fronts.
The P3111-SN satin nickel pull measures 5-3/4 inches in overall length, so it extends slightly past the mounting holes for a balanced look on doors and drawers.
The Rotterdam collection pull projects 1-3/16 inches from the cabinet surface, creating space behind the handle for fingers while limiting how far it extends into walkways.
This satin nickel cabinet handle has a 5/8 inch width across its front, which influences how it sits visually on narrow or wide rails and stiles.
The Hickory Hardware Rotterdam pull is made from zinc, giving it a familiar cabinet hardware feel suitable for regular door and drawer use.
The P3111-SN cabinet pull has a satin nickel finish, providing a soft metallic look that coordinates with other satin nickel components in many cabinet projects.
The Hickory Hardware Rotterdam pull P3111-SN combines 5 inch center to center mounting with a 5-3/4 inch overall length, giving you a defined drilling layout and a proportioned handle size for doors and drawers. Its satin nickel finish and zinc construction match common cabinet hardware standards, so it can sit alongside other satin nickel components in the same space. For projects supplied through Wurth Baer Supply where a straight, modern pull is needed on a 5 inch layout, this Rotterdam series handle offers a clear, repeatable hardware choice.
Sold In: 1 Each
