Hickory Hardware Rotterdam Series 3-3/4" (96 mm) Center to Center Satin Nickel Pull, - P3112-SN

Hickory Hardware Rotterdam Pull For Cabinets

Hickory Hardware Rotterdam pull gives cabinets and drawers a 3-3/4 inch center to center gripping point, so installers can align handles consistently across doors and fronts. The pull uses a 96 mm center to center dimension, which matches common drilling patterns for cabinet hardware layouts.

The pull is part of the Rotterdam collection, which provides a coordinated look when used across a full room of cabinets. It is made from zinc, so the body delivers a solid metal feel while staying workable for precise alignment on wood or composite fronts.

The satin nickel finish provides a muted metallic surface that works with many cabinet colors and appliance finishes. A length of 4-1/4 inches covers more of the rail on a door or drawer front, which helps visually balance wider or taller fronts in kitchens, baths, or built-ins.

A projection of 1-1/16 inches gives fingers space to pull without contacting the door face, which helps reduce fingerprints around the hardware area during everyday use. The 7/16 inch width creates a narrow, crisp profile that fits modern cabinet styles while still providing a defined edge for grip.

Practical Details That Support Cabinet Projects

• The 3-3/4 inch (96 mm) center to center dimension sets precise hole spacing, which speeds drilling layouts and keeps multiple pulls visually aligned across doors and drawer banks on cabinet runs.
• The 4-1/4 inch overall length gives the pull a slightly longer footprint on the rail, helping bridge wider stiles and offering good hand placement for both small drawers and larger cabinet doors.
• The 1-1/16 inch projection holds the gripping surface away from the cabinet face, which helps users get a firm pull and can cut down on knuckle contact with doors and drawer fronts in tight clearances.
• The 7/16 inch width produces slender, crisp lines, so installers can use this pull on contemporary or transitional cabinets where a low-bulk, linear profile supports clean visual alignment across the project.
• The satin nickel finish presents a soft metallic appearance that coordinates with many hinges and fixtures, which helps maintain a consistent look across complete rooms or multi-room cabinet installations.
• The zinc material provides a metal construction for this pull, giving the handle a solid feel in the hand and supporting repeated everyday opening and closing of drawers and cabinet doors.

Installation Fit Based On Center To Center Size

The pull is specified at 3-3/4 inch center to center, so installers can set their drill guides or jigs to 96 mm spacing for repeatable results across cabinet runs. This fixed spacing means the same layout can be used for both doors and drawers when the hardware plan calls for uniform pulls.

A length of 4-1/4 inches gives slight overhang beyond the drilling points, which helps visually center the handle on typical face-frame or frameless rails. With a 1-1/16 inch projection, the hand clearance from the door face remains consistent as hardware is repeated across upper and lower cabinets.

The 7/16 inch width allows the pull to sit comfortably on narrow rails or slab fronts without crowding panel edges, which is useful when working with slimmer drawer fronts or tight vertical reveals between fronts.

How This P3112-SN Pull Works In Real Use

Rotterdam Pull Application On Cabinets And Drawers

This Rotterdam collection pull functions as a handle on cabinet doors and drawers where a 3-3/4 inch center to center pattern is desired. The 96 mm spacing helps align with many cabinet drilling templates, so installers can run consistent hardware rows on banks of drawers.

The 4-1/4 inch length positions the gripping area across more of the stile or drawer front, which can help users pull from the center of wider fronts. A 1-1/16 inch projection keeps fingers off the door face, which supports smoother operation when hands are wet or when fronts are finished in materials that show marks easily.

The 7/16 inch width creates a slim bar that suits modern cabinet lines, so this pull can be used on straight-edged fronts without adding bulk. The satin nickel finish gives the hardware a neutral tone, which allows it to sit comfortably between cool and warm cabinet colors on full-room fits.

The zinc construction supports a metal feel at every touch point, so drawers and doors feel consistently equipped when multiple handles from the Rotterdam collection are used together. This consistency matters on projects where every cabinet opening must feel the same from one bay to the next.

Details That Support Repeatable Hardware Installation

The defined 3-3/4 inch (96 mm) center to center measurement allows installers to use one drill jig setting from start to finish, which reduces layout time and helps keep pulls level across long cabinet runs. This center to center spec also aids in planning replacements when updating existing cabinets drilled on that spacing.

The 4-1/4 inch length helps visually center the pull on face-frame and frameless applications, so even when fronts vary in width, the hardware line can stay visually straight. The 1-1/16 inch projection gives predictable clearance for hand grip, which helps installers maintain even offsets from the cabinet face across upper and lower rows.

The 7/16 inch width lets the pull sit comfortably on narrow rails without interfering with adjacent fronts, which is important when reveals between doors and drawers are small. The satin nickel finish allows this P3112-SN pull to coordinate across multiple cabinet zones, so a single hardware style can run through kitchens, baths, or work areas.

Using a zinc body gives every handle in the run the same weight and feel, which helps spaces look and operate as a unified installation. Across entire projects, this combination of defined center spacing, consistent projection, and coordinated finish supports straightforward planning and efficient installation.

Common Questions About This Rotterdam Cabinet Pull

Selecting This Satin Nickel Pull For Your Job

This satin nickel cabinet pull combines a 3-3/4 inch (96 mm) center to center layout with a 4-1/4 inch length, giving installers a predictable drilling pattern and a proportioned handle for doors and drawers. The zinc construction and satin nickel finish deliver a coordinated metal look across cabinets and casework.

For projects calling for Rotterdam collection styling and 96 mm spacing, the Hickory Hardware Rotterdam pull P3112-SN supports consistent appearance and operation across full-room cabinet installations.