Hickory Hardware Rotterdam Series 3-3/4" (96 mm) Center to Center Polished Nickel Pull, - P3112-14

Hickory Hardware Rotterdam Pull For Cabinet Projects

Hickory Hardware Rotterdam pull gives cabinets and drawers a straight, energetic look using crisp lines and smooth texture, so hardware reads clean on modern or updated jobs. This pull from the Rotterdam collection is made from zinc with a polished nickel finish, so it delivers a bright, reflective surface that ties in with other nickel hardware. The 3-3/4 inch (96 mm) center to center drilling matches common layouts, so it suits many standard cabinet and drawer fronts in shops and homes. Overall length of about 4-1/4 inches provides comfortable grip area, while the 1-1/16 inch projection keeps hands clear of the surface during use. A width of 7/16 inch keeps the profile slim, so doors can open fully without bulky hardware getting in the way.

Key Rotterdam Pull Details That Help Your Work

• The Rotterdam collection design focuses on strength and energy through crisp lines, so fronts get a defined, contemporary look that coordinates across a run of cabinets.
• Zinc material provides a solid feel in hand, so the pull supports frequent everyday operation on doors and drawers in active spaces.
• The polished nickel finish delivers a bright, reflective surface, so it pairs with other polished nickel components for a consistent hardware story.
• Center to center drilling of 3-3/4 inches (96 mm) matches a common pattern, so it aligns with many pre-bored fronts without layout changes.
• Overall length of 4-1/4 inches offers a stable gripping span, so hands can catch the pull comfortably from different angles when opening.
• Projection of 1-1/16 inches spaces the pull off the face, so fingers clear the door or drawer surface and reduce knuckle contact.
• Width of 7/16 inches keeps the pull visually light, so it works well where a slim, unobtrusive profile is preferred on face frames or slab fronts.

Installation Layout For This 96 mm Pull

The 3-3/4 inch (96 mm) center to center dimension defines the hole spacing for this pull, so drilling or existing bores need that distance between centers for precise fit. With a 4-1/4 inch overall length, the pull slightly overhangs the bore pattern on each side, so edges align neatly with door and drawer proportions. Its 1-1/16 inch projection sets hardware out from the surface, so clearance suits typical cabinet face thicknesses and hand sizes. The slim 7/16 inch width keeps the mounting footprint narrow, so it sits cleanly on rails, stiles, or narrow drawer fronts while maintaining visual balance.

Using Belwith Keeler Rotterdam Pulls In Projects

Where This Polished Nickel Pull Works Well

This Hickory Hardware Rotterdam Series pull fits cabinet and drawer applications where a 3-3/4 inch (96 mm) center to center layout is required, so it integrates into many kitchen, bath, or shop runs using that standard spacing. The polished nickel finish suits projects needing a bright metal tone, so it coordinates with hinges, latches, or other polished nickel hardware specified on the job. With a 4-1/4 inch overall length and 7/16 inch width, the pull sits proportionally on face frames and slab fronts, so it can repeat across banks of drawers without appearing oversized. Zinc construction supports use on frequently accessed fronts, so high-touch locations like main drawers or daily-use cabinet doors benefit from the solid feel.

Details That Support Consistent Fit And Alignment

The defined 96 mm (3-3/4 inch) center to center drilling helps maintain alignment across multiple cabinets, so rows of Rotterdam pulls stay visually straight along rails and drawer lines. Projection of 1-1/16 inches sets a consistent standoff from the surface, so doors and drawers share the same depth relationship when closed. The 4-1/4 inch length ties the pull edges into surrounding lines, so installers can reference stile or drawer edges for repeatable placement. With a slim 7/16 inch width, the pull allows tight reveals to stay clear, so adjacent doors can swing or drawers can operate without interference from bulky hardware.

Common Questions About The Rotterdam Nickel Pull

Selecting This Pull For Your Next Cabinet Run

The Hickory Hardware Rotterdam pull in polished nickel pairs a 3-3/4 inch (96 mm) center to center layout with a slim, 4-1/4 inch zinc body, so it suits standard cabinet drilling and keeps profiles clean. The polished nickel finish and Rotterdam collection styling bring a consistent, energetic look across doors and drawers, so runs stay visually tied together. For projects calling for defined lines, bright nickel tone, and common 96 mm spacing, this P3112-14 pull provides a straightforward cabinet and drawer hardware choice.