Hickory Hardware Rotterdam pull is a zinc cabinet pull from the Rotterdam collection that gives cabinets a defined, linear look. The crisp lines described for this collection create a strong, energetic style that suits straightforward kitchen, bath, or shop projects where clean geometry matters. The polished nickel finish provides a bright, reflective surface that visually tightens up door and drawer faces, which helps finished runs look aligned and intentional. With a 3-3/4 inch (96 mm) center to center dimension, this pull matches a very common drilling layout, so it fits typical cabinet boring patterns on many residential and commercial jobs. The 4-1/8 inch overall length keeps the pull compact relative to its hole spacing, which concentrates hand contact over the mounting points and supports a solid feel in daily use.
The 96 mm center to center measurement sets the drilling spread for this pull, so hole locations line up directly with that dimension on the cabinet face for accurate mounting. Because the overall length is 4-1/8 inch, the stiles or rails only need a modest flat area to seat the pull while still leaving enough margin at ends for clean sightlines on the door or drawer. The 1-1/16 inch projection establishes how far the pull stands off the front, creating working clearance for fingers between the handle and the cabinet surface during operation. With a 1/2 inch width, the pull sits as a narrow bar across the mounting points, which helps keep it centered visually on narrower rails without crowding nearby edges.
The stated 3-3/4 inch (96 mm) center to center size positions this pull for use anywhere that drilling pattern is established, such as typical base and wall cabinets using that spread. Its 4-1/8 inch overall length suits doors and drawers with medium-width rails, giving enough metal visible for a balanced look without dominating narrow members. The polished nickel finish supports projects where a reflective, metallic accent is desired, matching other polished nickel elements that may be present in the same space. Because the pull uses a slim 1/2 inch width and extends only 1-1/16 inch from the face, it works well on cabinets near walkways or tight clearances, keeping projection controlled while still offering usable grip depth. The Rotterdam collection description of strength and energy aligns with installations aiming for a straight-line, modern style across multiple cabinets.
The combination of 96 mm center to center and 4-1/8 inch overall length helps maintain consistent sightlines when lining up multiple pulls across a run, because each handle presents nearly the same overhang beyond the mounting points. The 1/2 inch width sets a repeatable visual band on every front, so installers can align the pull relative to rail edges and know the visible metal will sit the same way from cabinet to cabinet. With a 1-1/16 inch projection, the gap between the pull and the door or drawer front stays uniform on every unit, which keeps finger clearance predictable while walking a line of cabinets. The zinc material contributes to a solid, uniform mass across all pulls in a project, which makes each opening feel similar in resistance and feedback. The polished nickel finish, applied across the pull body, yields a unified reflective surface that reads consistently under shared lighting along an entire bank of cabinets.
The Hickory Hardware Rotterdam pull has a 3-3/4 inch (96 mm) center to center dimension, which sets the hole spacing for drilling and aligns with common cabinet boring patterns.
The P3114-14 pull has a 4-1/8 inch overall length, giving a compact footprint that fits comfortably on medium-width cabinet rails and drawer fronts.
This Rotterdam series pull is made from zinc, providing a solid, weighty feel that supports frequent use on cabinet doors and drawers.
This polished nickel cabinet pull projects 1-1/16 inch from the cabinet face, creating practical finger clearance between the handle and the door or drawer front.
The Hickory Hardware Rotterdam pull is 1/2 inch wide, giving a slim bar profile that sits neatly on narrower rails while still allowing a secure grip.
The PULL 96MM C/C polished nickel model uses a polished nickel finish, creating a bright, reflective surface that coordinates with other polished nickel hardware.
The P3114-14 Hickory Hardware Rotterdam pull pairs a 3-3/4 inch (96 mm) center to center layout with a 4-1/8 inch overall length, giving a compact, consistent footprint for cabinet runs. Its polished nickel finish and zinc construction provide a bright, solid-feeling handle suited to repetitive door and drawer use. With a 1/2 inch width and 1-1/16 inch projection, the pull delivers a slim, usable grip that aligns well on typical cabinet rails. For projects needing a clearly defined, linear pull at this drilling size, this Rotterdam model from Wurth Baer Supply matches those requirements.
Sold In: 1 Each
