Hickory Hardware Rotterdam 8 inch pull is a cabinet handle from the Rotterdam collection by Belwith Keeler that provides an 8 inch center to center grip, giving installers a clear drill layout for standard cabinet door and drawer spacing. The polished nickel finish on this pull delivers a bright, reflective surface that coordinates with other polished nickel cabinet hardware in the same space. A zinc material body supports the pull, offering a solid-feeling handle for everyday cabinet use in kitchens, baths, or built-ins. The overall 9-1/4 inch length creates a balanced look on wider drawers and doors where smaller pulls might appear undersized. A 1/2 inch width keeps the profile slim, which helps this pull sit neatly on narrow rails or stile faces. The 1-1/4 inch projection provides hand clearance off the cabinet front, supporting a comfortable grip while opening and closing.
This pull uses an 8 inch center to center mounting layout, so installers can position holes precisely 8 inches apart to set the handle straight and level across the cabinet face. The 1-1/4 inch projection gives enough stand-off from the cabinet surface to clear fingers behind the pull during operation, reducing hand contact with the door finish over time. With a 9-1/4 inch overall length, the handle aligns well when centered across common drawer widths, simplifying layout in banks of drawers where consistent spacing matters visually. The 1/2 inch width keeps the footprint narrow on the face of the door, which leaves more visible panel area and supports tight edge margins on narrower rails. The zinc construction and polished nickel finish present a single-piece handle ready for standard cabinet pull mounting practices in woodworking shops or on site.
This handle is part of the Rotterdam collection, so its crisp lines and smooth texture match other Rotterdam pieces when a project calls for a unified hardware story across an entire room. The 8 inch center to center size fits well on wider drawers and doors, which makes this pull a strong choice for base cabinets, pantry doors, and long drawer fronts in kitchens or office storage. Because the pull measures 9-1/4 inches overall, it visually anchors larger fronts that might look under-scaled with shorter hardware, creating a more intentional layout. The polished nickel finish coordinates with other polished nickel fixtures in the space, tying cabinets into surrounding faucets, lighting, and hinges that share the same finish family. A 1/2 inch width keeps the pull looking lean, which supports modern cabinet designs that rely on straight lines and minimal visual weight on door faces.
The 8 inch center to center dimension offers a clear measurement for drilling jigs, so installers can repeat hole placement across a run of cabinets without re-measuring each piece. With a 1-1/4 inch projection, the handle stands off the door far enough that fingers can hook behind it easily, which helps users get reliable grip on heavier drawers or tall pantry doors. The 9-1/4 inch overall length lets installers line up the pull with panel features or rail intersections, helping hardware land consistently across different cabinet sizes. Since the pull is made from zinc with a polished nickel finish, shops can spec it knowing the metal and finish combination stays uniform across multi-room projects. The 1/2 inch width means the drill centerline stays close to the door surface edge visually, which helps align hardware neatly on narrow frame members and keeps reveals looking even from cabinet to cabinet.
The P3117-14 pull has an 8 inch center to center dimension, a 9-1/4 inch overall length, a 1/2 inch width, and a 1-1/4 inch projection, giving installers clear layout and drilling references.
This cabinet pull uses zinc as the base material with a polished nickel finish, creating a bright metal look that matches other polished nickel hardware on the same project.
The 8 inch center to center size sets a fixed hole spacing, which works well with drilling templates and makes it easier to repeat hardware placement across multiple cabinets.
The Rotterdam collection pull suits cabinet doors and drawers where a longer handle is preferred, such as base cabinets, pantry doors, or wide drawers needing more grip length.
The 1-1/4 inch projection positions the pull away from the cabinet face, providing space for fingers behind the handle and reducing contact with the door surface when pulling.
The 1/2 inch width keeps the pull visually slim, so it sits lightly on the door face and supports clean lines on modern or narrow-frame cabinet designs.
The Hickory Hardware Rotterdam 8 inch pull P3117-14 gives you an 8 inch center to center layout, a 9-1/4 inch overall length, and a polished nickel finish in a zinc body. These dimensions support clean hardware alignment, consistent drilling, and a coordinated look across cabinet runs. For projects calling for Rotterdam collection styling with a bright polished nickel surface, this handle delivers a defined set of measurements that fit wider drawers and doors. Use this pull wherever an 8 inch center to center handle with a slim 1/2 inch profile and 1-1/4 inch projection suits the cabinet design and daily use demands.
Sold In: 1 Each
