Hickory Hardware Rotterdam Series 8" (203 mm) Center to Center Polished Nickel Pull, - P3119-14

Hickory Hardware Rotterdam Pull For Cabinets

Hickory Hardware Rotterdam pull gives cabinets a straight, crisp handle that suits projects needing a clean, linear look. This pull is part of the Rotterdam collection, so its design follows a consistent family style across related hardware. The polished nickel finish provides a bright, reflective surface that reads modern on installed doors and drawers. Zinc material keeps the pull feeling solid in hand while supporting everyday cabinet use in busy spaces. An 8 inch center to center layout sets the screw holes at a common size for wide pulls, which helps when laying out multiple fronts in a run. Overall length of 9-1/2 inches leaves overhang beyond the holes, giving visual balance on wider drawer faces. A 1 inch projection stands the pull off the surface enough for fingers to wrap naturally without crowding the panel.

Key Rotterdam Cabinet Pull Details In Practice

• The 8 inch center to center dimension spaces fasteners for longer drawers, which helps spread grabbing force across a wider section of the front.
• The 9-1/2 inch overall length visually fits broader cabinet faces, so the handle does not look undersized once mounted along wide rails.
• The 1 inch projection creates a consistent hand clearance off the door or drawer front, supporting a comfortable grip on repeated use.
• The 9/16 inch width keeps the pull low profile from the front view, which suits straightforward cabinet layouts needing simple, linear hardware.
• The polished nickel finish delivers a bright metallic look, helping this handle read as a defined line against many cabinet finishes.
• The zinc construction gives the pull a solid feel in use, which supports everyday opening and closing across typical cabinet installations.

Cabinet Pull Fit, Hole Spacing, And Layout

The 8 inch center to center measurement dictates where mounting holes land on the door or drawer front, guiding drilling or layout for new work or replacements. A 9-1/2 inch overall length means the handle edges extend beyond the mounting points, which helps center the grip area over wider fronts. The 1 inch projection sets how far the pull stands off the surface, influencing how fingers approach from above or below. At 9/16 inch width, the handle reads as a narrow bar, so it occupies minimal visual space while still giving enough face for a secure grasp. Being part of the Rotterdam collection ties this pull to a coordinated line, which matters when repeating the same size and style across an entire bank of cabinetry.

Using This Belwith Keeler Pull On Projects

Where This Rotterdam Collection Pull Works Well

This Belwith Keeler pull sits in the Decorative Hardware & Moldings category under handles and pulls, so its role is to act as the working grip point on cabinet doors and drawers. The 8 inch center to center layout suits wider fronts where a longer pull looks in scale, especially on banks of drawers or tall doors that benefit from extended hardware. The Rotterdam collection identity means this piece can repeat across an installation while keeping the same crisp line profile from cabinet to cabinet. Its polished nickel finish gives a bright, metallic surface that stands out clearly on many wood tones and painted faces, supporting easy hand placement. As a handle and pull product class item, it is designed to be grasped repeatedly in normal cabinet use.

Details That Support Consistent Cabinet Results

The stated 8 inch center to center dimension allows repeat drilling along a run of cabinets, helping maintain alignment of pulls from one unit to the next. A 9-1/2 inch overall length sets a fixed span that installers can center on drawer fronts for visual consistency across stacked drawers. The 1 inch projection defines how far the grip zone stands off the panel, keeping hand clearance uniform across doors and drawers using this same model. With a width of 9/16 inch, the pull remains slim, limiting how much front surface it covers while still offering enough bar surface for a firm grasp. Zinc material paired with a polished nickel finish lets the handle act as both working hardware and a defined design line, tying function and appearance together on completed cabinetry.

Common Questions About The P3119-14 Cabinet Pull

Selecting This 8 Inch Rotterdam Pull For Work

Choosing this Hickory Hardware Rotterdam pull with 8 inch center to center spacing ties cabinet fronts to a defined, linear handle that matches the Rotterdam collection style. The combination of zinc construction, polished nickel finish, and 9-1/2 inch overall length supports projects that call for a bright, slim pull across doors and drawers. Using these verified dimensions and finish details helps align layout, drilling, and visual rhythm when planning or updating cabinetry with Belwith Keeler hardware from Wurth Baer Supply.