
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Bonding Adhesive 9 oz Cartridge is a Princeton Chemical seam adhesive designed for fabricating countertops, bathroom vanities, wall panels, and other surfaces. This smoke color cartridge is formulated to create tough, virtually invisible bonds at seams and joints, which helps finished installations present as a single continuous surface. Because the adhesive is classified as a seam adhesive within laminate caulks, it is suited to joining laminate and other surfacing materials along straight runs, corners, or returns where appearance matters. The 9 oz cartridge format supports controlled dispensing during fabrication, giving consistent bead size along the length of a seam so joints cure evenly. By aligning the cartridge format, color, and seam-focused formula, this adhesive supports both structural connection and visual continuity across a range of surfacing jobs.
The manufacturer states that one 9 oz cartridge will dispense approximately 40 feet of a 1/4 inch bead of adhesive, so installers can estimate linear seam coverage directly from the part description. That coverage level supports multiple runs on a single vanity or a combination of shorter seams across tops and backsplashes before a new cartridge is needed. Because the adhesive is delivered through a cartridge, it can be applied in a controlled bead along the joint, which helps maintain uniform thickness for a consistent bond line. The 1/4 inch bead reference gives a practical planning dimension, allowing fabricators to align groove depth, seam spacing, or clamping setups around a known adhesive volume per foot.
This Princeton Chemical bonding adhesive is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it fits naturally into both shop fabrication and on-site finish work. The adhesive produces tough, virtually invisible bonds on cast polymers, which suits many solid-surface style tops where seams must support daily use. Compatibility with acrylics and polyester blends extends its use across common decorative surfacing materials, allowing one product to handle assorted panel types in a project. The ability to bond engineered quartz means the adhesive can be used in many quartz countertop installations at joints and returns. Suitability for natural stone surfaces makes it relevant where stone tops or panels need discreet seams, helping visually tie stone sections together while maintaining a joined surface.
Because the adhesive is categorized as a seam adhesive within laminate caulks, it is targeted at the joint line rather than broad-area lamination, which helps keep bond material concentrated only where two edges meet. The description that it produces tough, virtually invisible bonds means the adhesive is formulated to hold surfacing sections together while minimizing visible joint lines, helping finished countertops and panels read as continuous pieces. Its performance on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone streamlines fabrication workflow when a project uses more than one of these materials, since the same seam adhesive can bridge between surfaces in adjoining areas. The 40-foot coverage at a 1/4 inch bead allows planners to map out seam lengths and cartridge counts during takeoff, which supports predictable material usage and helps reduce leftover adhesive at the end of a job.
The PC3001 bonding adhesive bonds cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, allowing one cartridge to serve across these common surfacing materials in fabrication work.
The 9 oz cartridge will dispense approximately 40 feet of a 1/4 inch bead, letting installers plan linear seam lengths and cartridge quantities from that coverage figure.
This bonding adhesive is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it fits standard decorative surfacing projects.
The product class is seam adhesive, indicating it is formulated to bond joints where two surfacing pieces meet, supporting strong, visually blended seams.
The smoke color description indicates a neutral tone at the bond line, which helps seams visually blend with many gray or darker surfaces once cured.
This Bonding Adhesive 9 oz Cartridge, Smoke, from Princeton Chemical is supplied by Wurth Baer Supply for use in woodworking and surfacing fabrication.
This Bonding Adhesive 9 oz Cartridge, Smoke, from Princeton Chemical is positioned as a seam adhesive for countertops, bathroom vanities, wall panels, and related surfaces, linking directly to common fabrication tasks. Its ability to produce tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone connects a single cartridge to many shop and site conditions. With a stated coverage of approximately 40 feet of a 1/4 inch bead per cartridge, planners can size orders around seam length rather than guesswork. For projects running across laminate-style surfaces, quartz, or stone, this smoke color seam adhesive offers a unified approach to joint bonding through Wurth Baer Supply.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | NN909-MIXTIP Mfr# PCC201 | 9 oz Adhesive Cartridge Mix Tip |