Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
bonding adhesive cartridge seaweed from Princeton Chemical is a 9 oz seam adhesive designed for joining surfacing materials in fabrication work, so installers can create consistent seams across projects that specify this Seaweed color tone. As a seam adhesive, it is built to produce tough, virtually invisible bonds, which supports clean visual lines on finished countertops and panels where clients expect uniform appearance across joints. This cartridge is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so one product can be used across multiple flatwork applications in the same job. The adhesive is formulated for use on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, letting fabricators run one cartridge across different sheet or slab materials on a project when those materials fall within this list. With these properties, the PC6004 cartridge supports shop and site work that demands strong seams and color-appropriate joints.
This 9 oz bonding adhesive cartridge is described as ideal for fabricating countertops, so it fits directly into shop workflows where slabs or sheets are joined along long edges to build continuous runs. The same product is noted as suitable for bathroom vanities, which lets fabricators keep color and joint characteristics consistent between kitchen and bath areas on coordinated projects. Its suitability for wall panels extends use beyond horizontal work, so installers can apply similar seam performance on vertical cladding where panels meet. Because the cartridge is formulated for cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, crews can keep one color-matched Seaweed seam adhesive available when working across those listed surface materials on the same job.
The Princeton Chemical PC6004 bonding adhesive cartridge in Seaweed is aimed at fabrication of countertops, giving installers a seam product matched to that work so joints can be run along edges and cutouts in the same color family. Its suitability for bathroom vanities means smaller tops, deck seams, and backsplash joints can use the same cartridge, reducing product variation between related pieces in a set. For wall panels, the seam adhesive supports joining panel edges in a consistent manner, which helps keep joint lines cohesive around corners and along long wall runs. Because the adhesive is specified for cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, shops working with these named materials can assign PC6004 as a standard Seaweed-colored seam adhesive where those substrates are present.
As a seam adhesive that produces tough, virtually invisible bonds on compatible surfacing materials, PC6004 is intended to hold joints mechanically while minimizing the visual break at the seam, which matters when clients inspect high-visibility tops and panels. The 9 oz cartridge format, with output of approximately 40 feet of a 1/4 inch bead, gives fabricators a predictable yield per cartridge, helping them plan linear footage of seams on larger installations without frequent changeovers. Its classification under laminate caulks and seam adhesive signals that it is targeted at joining tasks instead of broad sealing work, which supports more predictable behavior at the bond line when aligning and tightening pieces. The Seaweed designation ties the adhesive to a specific color reference, allowing repeat jobs or expansions to match previous seam appearance by reusing the same PC6004 part number.
The PC6004 Seaweed cartridge is a Princeton Chemical bonding seam adhesive, so it is intended for joining surfacing materials where a tough, visually discreet seam is needed.
This bonding adhesive is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other similar surfaces, so it supports a range of flatwork seam applications.
The adhesive is formulated for cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, so it can be used when seams join these named materials.
One 9 oz cartridge dispenses approximately 40 feet of a 1/4 inch bead, allowing estimators to relate cartridge count to expected linear seam length on a project.
This bonding adhesive produces tough, virtually invisible bonds on compatible materials, supporting seam lines that visually blend into the surrounding surface.
The Seaweed designation, tied to part PC6004, identifies a specific color tone, which helps shops match seam appearance across multiple components or future additions.
The Princeton Chemical PC6004 bonding adhesive cartridge in Seaweed brings a 9 oz seam adhesive format that is described as ideal for countertops, bathroom vanities, and wall panels, giving fabricators one color-specific option for these tasks. Its ability to produce tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone supports consistent joint performance when those materials are present. For jobs calling for a Seaweed tone in these surfaces, this cartridge offers defined output of about 40 feet of 1/4 inch bead, helping planners align seam footage with adhesive demand during project setup.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  NN909-MIXTIP Mfr# PCC201 | 9 oz Adhesive Cartridge Mix Tip |