Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bonding Adhesive Cartridge - Alabaster, 9 oz is a Princeton Chemical seam adhesive designed for bonding and seaming decorative surfaces where an alabaster tone is needed. This 9 oz cartridge is part of Princeton Chemical seam adhesives, giving fabricators a cartridge-based solution for controlled dispensing during countertop and panel work. The product is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it supports a range of residential and commercial surfacing projects that use similar materials. The adhesive produces tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, which helps seams visually blend into surrounding material and supports structural performance along joints. As a laminate caulk and seam adhesive, it is suited to detailing and joining surfacing materials where appearance and bond strength both matter. One cartridge will dispense approximately 40 feet of a 1/4" bead of adhesive, which helps with planning material usage across multiple seams or longer runs.
This Princeton Chemical seam adhesive is identified as a bonding adhesive cartridge, so it works within cartridge-dispensing workflows common in surfacing fabrication. The 40 feet of 1/4" bead per cartridge specification gives an approximate coverage rate, letting installers relate known bead size to seam length when laying out countertop and wall panel joints. The adhesive is positioned for use on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, so a single product can serve across mixed-material installations that incorporate these materials in one project. Its role as a laminate caulk and seam adhesive supports detailing edges and transitions around countertops, bathroom vanities, and wall panels where a consistent alabaster appearance across bonded seams plays a role in the final install.
This Princeton Chemical bonding adhesive cartridge is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, placing it squarely in shop and on-site fabrication work for those assemblies. Its use on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone means it supports seams across a wide span of decorative surfacing materials found in kitchens, baths, and commercial fit-outs. As a laminate caulk and seam adhesive, it works where surfacing sheets or slabs meet, creating joints in corners, inside cutouts, and along long runs where pieces are joined to reach finished dimensions. The alabaster identifier ties the adhesive color to alabaster-toned surfaces, which is useful when matching seams in materials that carry a similar shade. The 9 oz cartridge volume then fits into tool setups that accept this cartridge size, supporting a continuous workflow around fabrication tables and installation areas.
The ability of this adhesive to produce tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone means seams can be designed for both strength and appearance in the same product choice. When building countertops and bathroom vanities, this helps joints carry daily loads while visually reading as a continuous surface that aligns with the selected alabaster color. In wall panel fabrication, the same bonding behavior lets installers create extended runs from multiple panels, helping joints visually recede while still holding panels in position along substrates or frameworks. The specified coverage of approximately 40 feet of a 1/4" bead per 9 oz cartridge gives a planning baseline, so teams can relate linear footage of seams to the number of cartridges required on a project. As a seam adhesive within the Adhesives and Caulks category, it occupies a defined role in the material lineup for surfacing work, clarifying when this cartridge is selected over general-purpose construction adhesives. For laminate caulk applications, having an alabaster tone in a bonding-grade formulation supports consistent color around edges, backsplashes, or transitions that use compatible surfacing materials in similar shades, helping keep visual lines consistent wherever seams occur.
The bonding adhesive cartridge produces tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, so it serves a wide range of decorative surfacing materials.
One 9 oz bonding adhesive cartridge will dispense approximately 40 feet of a 1/4" bead, allowing planning of linear seam length from each cartridge in fabrication or installation work.
The adhesive is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it fits projects using similar decorative surfacing assemblies.
The alabaster description identifies the adhesive color tone, helping seams visually blend into alabaster-colored surfacing so joints are less noticeable in the finished work.
As a seam adhesive in the Adhesives and Caulks category, the cartridge is intended to bond and join surfacing pieces at their edges, supporting structural and visual performance of seams.
PC2101 is the manufacturer part number for this Princeton Chemical 9 oz bonding adhesive cartridge in alabaster, helping match the exact formulation and color across orders.
The Princeton Chemical Bonding Adhesive Cartridge - Alabaster, 9 oz, gives fabricators a seam adhesive described as ideal for countertops, bathroom vanities, wall panels, and similar surfaces, so it aligns with common decorative surfacing projects. Its ability to produce tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone connects to mixed-material jobs that still need consistent seam color. The 9 oz cartridge format with approximately 40 feet of 1/4" bead coverage supports planning of cartridge counts around known seam lengths. When an alabaster-tone laminate caulk and seam adhesive is needed within these material types, this PC2101 cartridge fits directly into that role.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  NN909-MIXTIP Mfr# PCC201 | 9 oz Adhesive Cartridge Mix Tip |