Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Bonding Adhesive Cartridge Colony Bluff gives fabricators a Princeton Chemical seam adhesive formulated for solid surface work. This 9 oz cartridge is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it supports a wide range of shop and onsite projects using one product. As a seam adhesive, it is designed to produce tough, virtually invisible bonds on a variety of surfacing materials, so you can align color-matched seams while keeping structural strength in demanding areas. The adhesive works on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, which lets you move between different surfacing lines without changing materials for every substrate. One cartridge will dispense approximately 40 feet of a 1/4 inch bead of adhesive, so you can plan linear footage for seams and joints across multiple runs from a single cartridge.
This Princeton Chemical seam adhesive comes in a 9 oz cartridge, so it fits typical cartridge-based dispensing setups used around laminate caulks and similar products, allowing straightforward placement along seam lines. The stated output of approximately 40 feet of a 1/4 inch bead means each cartridge has a defined coverage profile, which helps you plan continuous runs along countertop edges, vanity seams, or wall panel joints without guessing capacity. Because it is described for use on countertops, bathroom vanities, wall panels, and other surfaces, you can schedule it across shop fabrication and onsite detail work, using the same bead size planning in both environments. Its classification in the adhesives and caulks category, specifically laminate caulks and seam adhesive, signals that it is intended for precision application in joint areas rather than broad trowel work.
The Bonding Adhesive Cartridge - Colony Bluff, identified with manufacturer part PC2030, is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it fits typical solid surface and stone shop work. Because it is formulated as a seam adhesive in the laminate caulks category, it targets the joints and edges that carry the most visual scrutiny, such as front edges, inside corners, and panel transitions. The product is stated to produce tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, so it can be used across mixed-material installations where tops, splashes, and vertical panels may be different compositions. That range means one color tone such as Colony Bluff can carry through a space with consistent seam treatment as you transition between horizontal and vertical planes.
This Princeton Chemical seam adhesive is described as producing tough, virtually invisible bonds, so joints are reinforced while minimizing visible lines, which supports cleaner finishes when aligning patterned or solid surfaces. Working on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone means the same cartridge can address several surface chemistries, simplifying adhesive selection during layout and reducing the need to adapt techniques between tops and vertical cladding in the same color family. The specified 9 oz cartridge size and approximate 40 feet of a 1/4 inch bead give a predictable output, so you can map out seam locations and expansion of runs with confidence that a cartridge will carry through long edges or multiple shorter joints. As a product classified under adhesives and caulks with a focus on laminate caulks and seam adhesive, it is oriented toward controlled bead placement, supporting neat seams that require minimal cleanup.
The Bonding Adhesive Cartridge - Colony Bluff PC2030 is a Princeton Chemical seam adhesive in the adhesives and caulks laminate caulks category, so it is intended for bonding seams in surfacing work.
The bonding adhesive is described as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces, so it targets typical horizontal and vertical surfacing projects.
The seam adhesive is stated to work on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone, so it covers a broad range of surfacing materials used in fabrication.
One 9 oz cartridge will dispense approximately 40 feet of a 1/4 inch bead, so coverage per cartridge can be planned around known seam lengths and joint counts.
The adhesive is described as producing tough, virtually invisible bonds, meaning it supports structural seams while aiming to reduce visible joint lines in finished installations.
Being in the laminate caulks and seam adhesive category signals a product intended for controlled bead application along joints, supporting clean seams on fabricated surfaces.
The Bonding Adhesive Cartridge - Colony Bluff PC2030 from Princeton Chemical combines a 9 oz cartridge format with a seam adhesive formulated for tough, virtually invisible bonds on cast polymers, acrylics, polyester blends, engineered quartz, and natural stone. Its description as ideal for fabricating countertops, bathroom vanities, wall panels, and other surfaces means it fits common fabrication and installation workflows across multiple project types. With approximately 40 feet of 1/4 inch bead per cartridge, it offers predictable coverage for planning seams and joints. Select this Colony Bluff bonding adhesive through Wurth Baer Supply when you need a defined linear output and multi-material surfacing support from a single color-matched seam adhesive.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  NN909-MIXTIP Mfr# PCC201 | 9 oz Adhesive Cartridge Mix Tip |