Amerock Kane Appliance Pull For Classic Cabinetry

Amerock Kane appliance pull gives you an 8 inch (203 mm) center-to-center grip that spans typical appliance or tall cabinet layouts, so mounting holes line up cleanly on wider faces. The polished nickel finish provides a bright, reflective surface that ties in with matching hinges or plumbing, helping maintain a consistent look across a kitchen or built-in run. Zinc construction forms a solid, single-piece pull body, which supports everyday door and panel use on residential or light commercial projects. Overall length of 8-7/8 inches (225 mm) leaves a balanced margin beyond the mounting holes, so the pull sits visually centered on wider rails. A 1-5/8 inch (41 mm) projection sets the hand clearance off the door, giving fingers space behind the pull while keeping the profile tight to the front. The Kane collection styling delivers a simple, understated shape that works with both traditional and streamlined cabinet designs.

Key Kane Series Appliance Pull Details

• The 8 inch (203 mm) center-to-center dimension sets predictable mounting points, which helps align this Amerock Kane appliance pull across multiple doors or drawer fronts in a straight, repeatable line.
• The 8-7/8 inch (225 mm) overall length provides visible grip length beyond the screw locations, which helps the pull look proportionate on wider appliance panels and tall pantry doors.
• The 1-5/8 inch (41 mm) projection sets the pull off the face of the door, giving working finger clearance behind the bar while reducing the chance of catching clothing on an overly deep handle.
• The 7/8 inch (22 mm) width and 7/8 inch (22 mm) base diameter create a stable footprint against the surface, which helps distribute hand force and resist wobble under regular use.
• The polished nickel finish on zinc material delivers a smooth, bright appearance, which coordinates with other polished nickel decorative hardware in a kitchen or bath layout.
• The Amerock Kane collection design pairs a timeless profile with utilitarian lines, which lets the same appliance pull sit comfortably on both framed and frameless cabinet programs.

Mounting Dimensions For Accurate Pull Placement

This Amerock Kane series polished nickel appliance pull uses an 8 inch (203 mm) center-to-center mounting pattern, so layout work focuses on that single critical dimension when drilling through appliance panels or cabinet faces. With an 8-7/8 inch (225 mm) total length, the pull leaves roughly 7/16 inch on each side beyond the holes, helping installers visually center the hardware on rails and stiles. The 7/8 inch (22 mm) base diameter defines the contact area against the surface, which gives a clear reference when aligning the pull over existing holes. A 1-5/8 inch (41 mm) projection from the mounting surface sets the standoff distance, providing consistent clearance line-to-line across a bank of doors. The 7/8 inch (22 mm) width keeps the grip comfortable without crowding narrow stiles, so it suits both appliance faces and adjacent cabinet doors in the same project.

Using This Amerock BP53804PN Pull In Projects

Where The Amerock Kane Appliance Pull Fits Best

The Amerock BP53804PN part number identifies this pull as an 8 inch (203 mm) center-to-center appliance pull in the Kane collection, so it suits applications where a longer handle is needed on doors or panels. The polished nickel finish supports use on kitchens, baths, or built-ins that already feature polished nickel faucets or hinges, keeping a consistent metal tone across the room. As an appliance pull within decorative hardware and moldings, it targets wider doors, panels, or tall pantry fronts rather than small drawers, helping maintain scale on large faces. The 8-7/8 inch (225 mm) length works well when you want a substantial handle that still stays manageable on standard cabinet widths. Its zinc construction places this pull within typical cabinet hardware material standards, making it a practical option for woodworking shops outfitting full runs of cabinetry.

Details That Support Repeatable Alignment And Use

The 8 inch (203 mm) center-to-center spacing on this Amerock Kane appliance pull lines up with common drilling jigs, which supports faster, repeatable layout when installing multiples across a project. The 1-5/8 inch (41 mm) projection establishes a fixed standoff that keeps fingers clear of the door surface, which is useful on heavier doors where users need a confident grip. The 7/8 inch (22 mm) width offers a broad contact surface for fingers, helping reduce pressure points when pulling larger panels. Matching 7/8 inch (22 mm) base diameter at each end spreads the load where the pull bears against the door, which supports a solid feel under hand. As part of the Kane collection, this pull shares the same understated profile across sizes, so hardware looks consistent when combining this appliance pull with shorter pulls from the same line. The polished nickel finish reflects surrounding light, which can make hardware stand out clearly against darker cabinet finishes.

Common Questions About The Amerock Kane Appliance Pull

Selecting This Pull For Your Next Cabinet Run

The Amerock Kane series polished nickel 8 inch (203 mm) center-to-center appliance pull combines a defined drilling pattern with an 8-7/8 inch (225 mm) length, supporting consistent layouts on larger doors and panels. Its zinc construction, 1-5/8 inch (41 mm) projection, and 7/8 inch (22 mm) footprint provide a practical balance of clearance, stability, and hand feel for cabinetry projects. When a project calls for an appliance pull that matches polished nickel hardware and stays within proven Amerock dimensions, this Kane appliance pull offers a straightforward option to specify and repeat across the job.