Berenson Bravo Series 2-3/16" (56 mm) Center to Center Graphite Tab Pull, - 1074-4GPH-P

Berenson Bravo Edge Pull For Contemporary Cabinets

Berenson Bravo edge pull is a contemporary aluminum tab pull in a graphite finish that provides a clean, modern grip point for cabinet fronts. The Bravo Series design pairs this low-profile pull with contemporary style, so it works where straight, simple lines are preferred on fronts and panels. The 3 inch overall length gives a compact footprint that helps streamline the face of doors and drawers while still defining a clear handhold along the edge. A 1-3/4 inch projection brings the pull out enough to get solid finger contact, which supports confident opening on heavier or taller fronts. The graphite finish defines the pull visually against many door and drawer colors, making the hardware easy to spot in low light or busy shop environments. The aluminum material keeps weight down while still giving the pull a solid feel during everyday cabinet use.

Practical Details Of This Graphite Tab Pull

• The 2-3/16 inch center to center dimension sets precise hole spacing, which guides drilling layouts and jig settings for consistent edge alignment across multiple fronts.
• The 3 inch overall length keeps the pull compact, allowing it to sit neatly on narrow drawer fronts or smaller doors without crowding other hardware positions.
• The 1-3/4 inch projection establishes useful finger clearance, so hands can grab from above or below the tab without scraping against the cabinet surface.
• The 3/4 inch width concentrates the grip area, which helps keep the pull visually light while still providing enough surface for a steady pull motion on doors.
• The 11/16 inch base diameter gives a defined contact area at the mounting point, which helps the pull sit firmly against the surface and maintains a clean transition line.
• The graphite finish supplies a dark, contemporary look that coordinates with many panel finishes and creates contrast that highlights the pull line.

Mounting Dimensions And Fit For Berenson Bravo Pull

The 2-3/16 inch center to center measurement on this Berenson Bravo edge pull sets the exact distance between mounting points, which is useful when aligning multiple pulls in a run of cabinets. With a 3 inch overall length, the pull extends slightly beyond the mounting span, giving a small margin of hardware at each side that frames the installation visually. The 1-3/4 inch projection moves the gripping surface out from the cabinet face, which improves leverage when operating deeper drawers or full-height doors. A 3/4 inch width holds the tab edge to a narrow profile, helping the pull sit neatly along the door or drawer edge where space for hardware may be limited. The 11/16 inch base diameter defines the footprint against the surface, which supports accurate layout marks during drilling and helps the pull seat flush on the finished panel.

Using This Aluminum Graphite Pull In Cabinet Runs

Where The Berenson Bravo Edge Pull Fits Best

This Berenson Bravo Series contemporary edge pull is part of the Berenson decorative hardware and moldings handles and pulls class, so it is suited to projects that rely on consistent hardware lines across multiple cabinets. The graphite finish works when a darker pull is preferred against lighter doors or when matching other graphite details in a room. With a 3 inch length and 2-3/16 inch center to center layout, the pull fits comfortably on standard cabinet doors and common drawer front sizes where tab pulls are specified. The aluminum construction keeps each pull relatively light on the panel, which can be helpful on thinner fronts or when many pulls are installed across a large bank of cabinets. The contemporary style description signals that this pull lines up visually with straight-edged doors and minimal trim, so it serves well on flat-panel and similar front designs.

Why These Bravo Pull Dimensions Help Workflow

The 2-3/16 inch center to center measurement on this Berenson 1074-4GPH-P pull lets installers repeat a single drilling pattern for every cabinet that uses this model, which supports efficient production and field work. The 3 inch overall length and 3/4 inch width create a compact hardware footprint that simplifies layout when balancing margins from door edges and adjacent fronts. The 1-3/4 inch projection gives fingers room behind the tab, which can reduce fumbling on tall pantry doors or lower drawers where access angles vary. The 11/16 inch base diameter gives a clear circular reference at each mounting point, which helps align the pull square to door edges using layout lines. The aluminum material keeps the pull easy to handle in volume, while the graphite finish visually unifies hardware across an installation so runs of doors and drawers read as a deliberate design line.

Common Questions About This Berenson Edge Pull

Selecting This Bravo Pull For Your Next Run

The Berenson Bravo edge pull with 2-3/16 inch center to center spacing, 3 inch overall length, and 1-3/4 inch projection offers a defined layout for contemporary cabinet jobs. The aluminum construction and graphite finish provide a consistent look where streamlined hardware is required. With its 3/4 inch width and 11/16 inch base diameter, this pull delivers a compact, repeatable footprint across doors and drawers. For projects that call for a contemporary graphite tab pull in the Bravo Series style, this model aligns dimensions and finish into a straightforward hardware choice.