Berenson Bravo Series 6-5/8" (169 mm) Center to Center Graphite Tab Pull, - 1076-4GPH-P

Berenson Bravo Series Tab Pull For Contemporary Jobs

Berenson Bravo Series tab pull gives you a contemporary aluminum pull in a graphite finish that works well when you want a low-profile edge grip on doors or drawers. The 6-5/8 inch (169 mm) center to center layout sets consistent spacing for drilling, which matters when lining up multiple fronts across a run of cabinets. Overall length of 9-1/16 inch leaves material at each end beyond the fasteners, so the pull spans wider drawer faces cleanly. A projection of 1-3/4 inch provides finger clearance off the face, helping hands grab the pull without dragging on the surface. The 3/4 inch width presents a slim tab appearance while still giving enough bearing surface for a solid grip. With a graphite finish over aluminum, the pull supports contemporary styling while keeping weight down on moving fronts.

Key Bravo Edge Pull Details That Help On Site

• The 6-5/8 inch (169 mm) center to center dimension sets repeatable hole locations, which keeps alignment straight across banks of doors or drawer fronts during installation.
• The 9-1/16 inch overall length gives extra length past the mounting points, which helps the pull visually balance wider fronts and cover minor drilling variation at the ends.
• The 1-3/4 inch projection stands the pull off the surface, which offers usable finger space so the pull can be grabbed comfortably without rubbing the cabinet face.
• The 3/4 inch width creates a narrow edge profile, which supports a modern look while leaving more visible face area on doors and drawers.
• The graphite finish on aluminum provides a dark contemporary appearance, which coordinates with modern cabinet styles while keeping the component lightweight.
• The Bravo collection and contemporary style designation tie this pull into a defined series, which helps match it visually with other Bravo pieces in the same project.

Bravo Edge Pull Mounting And Fit Considerations

The 6-5/8 inch center to center measurement on this Bravo edge pull sets the fastener spacing, which guides drilling layout when preparing cabinet fronts. Using this dimension across every front keeps pulls level and evenly spaced from edge to edge. The base diameter of 11/16 inch relates to the footprint where the pull meets the surface, which affects how much area is visually covered around the mounting points. With a projection of 1-3/4 inch and 3/4 inch width, the pull occupies a compact zone at the edge, which matters when clearance is tight between adjacent fronts or next to walls. The aluminum material with graphite finish means the pull adds minimal weight, which is useful on lighter doors where heavier hardware could change how the door moves.

Using The Berenson 1076-4GPH-P Pull In Cabinet Runs

Where This Graphite Tab Pull Fits Best

This Berenson Bravo Series 1076-4GPH-P pull is part of the Bravo collection in the handles and pulls category, so it fits projects calling for coordinated decorative hardware across multiple cabinets. The contemporary style designation points it toward modern and streamlined layouts, which suits flat-panel or slab fronts. With a 9-1/16 inch length and 6-5/8 inch center to center, the pull works where a longer edge grip is preferred, such as on wider drawers or tall doors. The aluminum construction suits woodworking environments where cabinet hardware needs to stay light on moving parts. The graphite finish supplies a dark tone that visually contrasts lighter fronts or blends with darker finishes, which helps create deliberate hardware lines along a run of cabinets.

Why These Bravo Dimensions Support Consistent Results

The defined 6-5/8 inch (169 mm) center to center spacing on this aluminum Bravo edge pull allows installers to base all drilling off a known measurement, which supports faster layout and consistent results on repetitive cabinet work. The 1-3/4 inch projection keeps the grip away from the face, which reduces contact with finished surfaces as doors and drawers are used over time. A 3/4 inch width limits how much of the door edge is visually covered, which keeps the tab looking light while still offering enough surface to grab. The 11/16 inch base diameter controls the contact area on the face, which helps create a defined transition between the pull and the cabinet material. Being part of the Bravo collection, this pull carries the same design language as other Bravo pieces, which simplifies maintaining a unified appearance from one cabinet bank to the next.

Common Questions About This Bravo Edge Pull

Select This Bravo Pull For Contemporary Cabinet Runs

The Berenson Bravo Series 6-5/8 inch center to center graphite tab pull brings a contemporary aluminum option with defined dimensions that support repeatable drilling and clean alignment. The 9-1/16 inch length, 1-3/4 inch projection, and 3/4 inch width combine to give practical finger clearance in a slim tab form. With its graphite finish and Bravo collection styling, this pull suits modern cabinet runs where coordinated hardware matters. Choose this 1076-4GPH-P model when a graphite edge pull with established center to center spacing fits the layout.