Nickel Finish And The Precision Fit of Salice's Premium Soft-Close Line

This Salice Series 700 Logica hinge brings Silentia soft-close damping and toolless mounting to 1/2 inch overlay doors on both face-frame and frameless cabinets, finished in nickel.

Key Features

• Silentia soft-close built into the hinge body damps the door over the final arc so it settles without impact.
• 1/2 inch overlay, half-crank arm positions the door at a partial overlay, the right geometry for two doors sharing a center partition.
• 110 degree opening delivers standard everyday access to cabinet contents.
• Logica toolless mounting clips the arm to the base plate without a screwdriver, speeding door installation and removal.
• Nickel finish on plated steel coordinates with pulls, knobs, and other visible hardware in the same finish family.
• Three-way adjustment brings doors into even alignment after the cabinet is in place.

Partial Overlay Doors on Face-Frame or Frameless Boxes

A 1/2 inch overlay door covers the cabinet side by about half an inch rather than spanning it fully. That geometry shows up on partial-overlay runs and on pairs of doors that share a single center partition, where each door carries the same half-crank arm. This hinge handles both cabinet types: it works on face-frame boxes where the door mounts to the stile, and on frameless boxes where it mounts to the side panel. The 35mm cup bores into the back of the door, and the arm clips to a base plate on the cabinet. That plate is a separate purchase and must be a Salice plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.

Premium Series Build in a Coordinating Finish

The Series 700 is Salice's premium concealed line, and Silentia soft-close is the feature that separates it from the standard Series 200. The damping is integrated into the hinge rather than added on, so there is no separate adapter to source or clip on after the fact. The plated steel construction in nickel holds up to the repetition of a working kitchen or bath, and the finish is a practical one: nickel reads as a neutral that coordinates with stainless appliances, brushed hardware, and both warm and cool cabinet tones. Side adjustment of plus 4.5mm and minus 1.5mm, combined with plus or minus 2mm of height adjustment, gives enough range to true up doors after installation without pulling them off the cabinet.

Who Reaches for This Hinge

Cabinet shops specifying a premium soft-close hinge for a partial-overlay or shared-partition door will find this hinge at the right tier: it carries the damping performance clients expect from a finished kitchen without the cost of a specialty application hinge. Designers coordinating hardware finishes across a project will appreciate that the nickel matches the broader finish ecosystem rather than standing apart from it. Contractors running face-frame and frameless work on the same job do not need to stock two different hinge families for the two cabinet types. For standard-thickness doors in the 16 to 22mm range, this hinge covers the application cleanly.

Common Questions

A Quiet Close and a Finish That Belongs in the Room

Specify this hinge when a partial-overlay or shared-partition door needs premium soft-close performance and a nickel finish that holds its own alongside the rest of the hardware in the space.