Nickel Soft-Close Concealed Hinge for 1/2 Inch Overlay Doors

This Salice Series 700 Silentia hinge brings soft-close performance to 1/2 inch overlay doors on face-frame and frameless cabinets, finished in nickel and mounted with standard screws.

Key Features

• Silentia soft-close damps the door over the final degrees of closing so it settles without slamming.
• 1/2 inch overlay, half crank arm positions the door at a partial overlay, including two doors sharing a center partition.
• 110 degree opening delivers standard everyday access from any cabinet.
• Screw-on mounting fastens directly to the cabinet side or face-frame stile with wood screws, no system holes required.
• Three-way adjustment brings doors to an even reveal after install, with up to 2mm height and 4.5mm side correction built into the arm.
• Nickel finish on steel holds up to daily contact and coordinates with brushed and satin metal hardware across the project.

Where the 1/2 Inch Overlay Fits

A 1/2 inch overlay door covers the cabinet side by about half an inch rather than nearly the full panel width. That geometry is most common on partial-overlay face-frame kitchens and on any run where two doors meet on a shared center partition, each overlapping that partition by the same amount. The half crank arm on this hinge sets that position precisely. The 35mm cup bores into the back of the door at a 45mm bore pattern, and the arm connects to a base plate mounted to the cabinet, ordered separately. Because mounting is screw-on, no pre-drilled 5mm system holes are needed, which makes this hinge equally at home on face-frame and frameless boxes built without a line-bore layout.

Nickel Steel Build with Silentia Damping

The hinge body is steel with a nickel finish, a combination that resists wear from repeated door cycling and coordinates cleanly with satin nickel pulls, knobs, and other visible hardware. The Silentia soft-close mechanism is integrated into the hinge rather than added on as a separate accessory, so the damping is consistent from the first close and requires no field adjustment. On partial-overlay doors where two panels share a partition, consistent soft-close on both sides keeps the cabinet face looking composed rather than rattled.

Builders and Remodelers Running Face-Frame Work

This hinge suits cabinet shops, remodelers, and finish carpenters who work primarily in face-frame construction and want a premium Salice soft-close without the added step of pre-drilling 5mm system holes for tool-free plate mounting. It is a natural fit for kitchen and bath renovations where partial-overlay doors are the design choice and the installer wants to move through the job on standard screw-on hardware. For frameless production work that already has system holes bored, the toolless Logica mounting version of this series installs faster. For a damped close on a full overlay door, the full-overlay version of the Series 700 is the correct pick.

Common Questions

Quiet Doors on Every Partial-Overlay Cabinet

When the job calls for 1/2 inch overlay doors that close quietly and a nickel finish that holds its look through years of daily use, this Salice Series 700 Silentia hinge delivers it on screw-on mounting that works with any cabinet layout.