Nickel Soft-Close Hinge for Half Overlay Cabinet Doors

This Salice 700 Series Logica hinge brings Silentia soft-close and toolless mounting to half overlay doors on both face-frame and frameless cabinets, finished in nickel.

Key Features

• Silentia soft-close damps the door over the final closing arc so it settles quietly without slamming.
• Half overlay, half crank arm positions the door to cover the cabinet side partially, the geometry two doors use on a shared center partition.
• 110 degree opening delivers standard everyday swing for kitchen and bath cabinet access.
• Logica toolless mounting clips the arm to the base plate without a screwdriver.
• Works on both face-frame and frameless cabinets when paired with the matching Salice base plate.
• Nickel finish on plated steel coordinates with brushed and satin hardware across the project.

The Right Hinge Where Two Doors Share a Partition

Half overlay is the configuration for double-door cabinets: two doors that meet on a single center partition, each covering roughly half of it. The half crank arm on this hinge positions each door so the pair sits flush and leaves a consistent reveal without the arms colliding inside the cabinet. It is also the correct choice for any single door set to a partial overlay rather than a full cover of the cabinet side.

The 35mm cup bores into the back of the door, and the arm clips to a Salice base plate mounted to the cabinet. That plate is sold separately and must be a Salice plate matched to your cabinet construction. Plates from other brands will not connect to this hinge.

700 Series Build and Silentia Damping

The 700 Series is Salice's premium concealed line, and the distinction over the value range shows in the closing feel. Silentia soft-close is built into the hinge body, cushioning the door through the final degrees of closing so there is no slam. The hinge is plated steel in a nickel finish, a neutral tone that reads as a clean, professional install on cabinets with brushed nickel pulls, satin nickel knobs, or stainless appliances nearby. Side and height adjustment give installers room to bring a run of doors to an even reveal after the plates are set.

Cabinet Shops, Contractors, and Retrofit Work

This hinge suits production cabinet shops building double-door frameless runs as well as contractors retrofitting face-frame kitchens where the existing layout calls for partial overlay doors. The Logica toolless clip keeps installs moving: clip on, adjust, done. For doors in the standard 16 to 22mm thickness range, this hinge fits without modification. Thicker doors need a thick-door hinge. If the project calls for a full cover of the cabinet side instead of a partial overlay, a full overlay version of this series is the correct pick.

Common Questions

Quiet, Even Closes Across Every Door in the Run

Specify this hinge when the job calls for half overlay doors that close without a sound and line up to an even reveal, in a nickel finish that holds its look alongside the rest of the hardware.