Nickel Finish Soft-Close Hinge for Half Overlay Doors

This Salice Series 700 concealed hinge brings Silentia soft-close to half overlay doors on both face-frame and frameless cabinets, with a screw-on mount and a nickel finish that blends into a wide range of cabinet interiors.

Key Features

• Silentia soft-close damps the door over the final closing arc so it settles quietly instead of slamming.
• Half overlay, half crank arm positions the door to cover part of the cabinet side, the standard geometry for two doors sharing a center partition.
• 110 degree opening angle delivers full everyday access to the cabinet interior.
• Screw-on mounting fastens directly to the cabinet with wood screws, no pre-drilled system holes required.
• Works on both face-frame and frameless cabinets, so one hinge family covers a mixed project.
• Three-way adjustment dials height, side, and depth to bring every door to an even reveal.

Half Overlay Doors on Shared Partitions and Mixed Cabinets

Half overlay is the geometry for doors that cover part of the cabinet side rather than nearly all of it. It is the configuration every pair of doors needs when they share a single center partition: each door overlays about half the panel, and the half-crank arm on this hinge carries that position precisely. The 35mm cup bores into the back of the door, and the hinge arm connects to a base plate mounted to the cabinet, which is sold separately. For a job that mixes face-frame boxes with frameless carcasses, this hinge crosses both without swapping to a different SKU.

Steel Construction in a Nickel Finish

The hinge body is steel with a nickel finish, a neutral tone that sits quietly in painted and natural-wood interiors alike. Series 700 is Salice's premium concealed line, and the Silentia damper in this hinge is what separates it from the spring-only Series 200: the door decelerates over the last few degrees of travel instead of contacting the frame at speed. On a run of shared-partition doors where two panels close toward each other simultaneously, that controlled close keeps the cabinets looking right over time.

Who Reaches for This Hinge

Cabinet shops building partial-overlay kitchens or bath vanities with paired doors will find this hinge well-suited for production work: the screw-on mount goes into any cabinet without needing pre-bored 5mm system holes, so it fits both production frameless boxes and face-frame site conditions. Remodelers retrofitting soft-close into an existing partial-overlay layout can use it the same way. Note that the base plate mounts to the cabinet separately and is sold as its own SKU; pair it with the matching Salice plate for this series. Plates are Salice-specific and are not interchangeable with plates from other brands.

Common Questions

Quiet Closes on Every Shared-Partition Door

When the job calls for half overlay doors that close softly and sit square, this Salice Series 700 hinge in nickel delivers the damped close and the adjustment range to get every pair of doors lined up right.