Soft-Close Blind Corner Hinge for Face-Frame and Frameless Cabinets

This Salice Series 700 Silentia hinge is built specifically for blind corner cabinets, delivering soft-close performance on overlay doors in both face-frame and frameless construction.

Key Features

• Blind corner geometry controls the door's swing so it clears the adjacent cabinet without collision.
• Silentia soft-close damps the door over the final degrees of closing so it settles quietly every time.
• 110 degree opening angle provides the access the blind corner application calls for without over-swinging into the adjacent run.
• Straight arm, overlay configuration positions the door over the cabinet opening at a standard overlay.
• Screw-on mounting gives a solid, fixed connection to the cabinet side or face frame.
• Three-way adjustment fine-tunes height, side, and depth after installation to bring doors into alignment.

Designed for the Blind Corner Problem

A blind corner cabinet sits where two cabinet runs meet at a corner, and the door on the return cabinet has to swing without striking the face of the adjacent cabinet. This hinge is engineered for exactly that condition. The 110 degree opening is the correct geometry here: it gives enough swing for practical access while keeping the door path clear of the neighboring face. That controlled angle is a design feature, not a shortcoming. The 35mm cup bores into the back of the door and the arm screws to a base plate on the cabinet, ordered separately. Use Salice plates matched to this series; plates are not interchangeable across brands.

Series 700 Build and Silentia Finish

The hinge is plated steel in a nickel finish, part of the Salice Series 700 premium line. Series 700 is where Salice puts Silentia soft-close, which means the damping is integrated into the hinge rather than added as a separate clip-on adapter. The 13.5mm cup depth and 45mm boring pattern suit standard doors in the 16 to 22mm range. Height adjustment of plus or minus 2mm and side adjustment of plus 4.5 to minus 1.5mm give you the range to square up a blind corner door once the cabinet is set, which matters in a corner install where alignment tolerance is tighter than on a standard run.

Where This Hinge Belongs

Specify this hinge on the return door of a blind corner cabinet in a kitchen, bath, or built-in where soft-close is part of the specification. It works on both frameless and face-frame construction. Cabinet shops laying out corner runs, designers specifying full kitchens, and contractors doing full kitchen installs will all recognize this as the right hinge for this application. If the corner cabinet uses inset doors rather than overlay, confirm the overlay attribute matches your door configuration before ordering. A compatible Salice base plate is required and sold separately.

Common Questions

Corner Installs That Close Quietly and Stay Square

When a blind corner cabinet needs a soft-close hinge that handles the geometry of the application and holds its adjustment over time, this Salice Series 700 Silentia hinge is the right specification.