Salice 200 Series Logica Hinge For Thick Doors

Salice 200 Series Logica hinge is a concealed cabinet hinge from Salice America designed for thick doors, giving installers a clean look with the working parts hidden. This hinge is part of the Silentia Series 200 family, so the soft-close mechanism is fully integrated inside the hinge cup, keeping the exterior hardware simple and minimizing exposed components on the cabinet. The hinge provides 94 degree opening, which controls door swing so doors clear the cabinet while staying within a predictable arc useful around adjacent walls or cabinets. It is suitable for doors up to 1-1/4 inch thick, allowing use on thick-face or heavy doors while maintaining minimal gaps between doors for a tight, professional layout. As a half overlay hinge for face-frame or frameless applications, it supports common cabinet layouts while maintaining consistent reveals across a run.

Key Soft-Close Hinge Details That Matter

• Silentia+ integrated soft-close mechanism uses twin silicone-oil dampers, so door motion is controlled by the hinge itself, helping doors close quietly and smoothly in everyday use.
• The soft-close mechanism is completely hidden inside the hinge cup, so there is no external damper, preserving the concealed hinge appearance and reducing extra parts on the cabinet.
• Silentia+ allows a perfect and constant closing of the door in any condition, giving installers predictable closing behavior across different door sizes within the hinge range.
• The hinge is all steel and nickel plated for corrosion resistance, so the working parts are protected in typical cabinet environments and the finish coordinates with common mounting plates.
• The hinge is permanently self lubricating using environmentally safe lubricants, so the moving arms are treated for long-term motion without separate lubrication steps in normal service.

Mounting And Adjustment Details For Accurate Fit

Silentia Series 200 soft-close hinge uses a hinge cup depth of 15.5 mm, which sets the boring depth needed in the door for proper seating and consistent overlay. The hinge cup edge drilling distance range of 3 mm to 9 mm gives flexibility in boring location, helping align overlay and reveal when working with different door designs. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw lets installers move the door horizontally relative to the cabinet, which is useful for dialing in even gaps across a bank of doors. Series 200 hinges are designed to work with Salice mounting plates, so the hinge interfaces directly with that plate system for face-frame or frameless layouts. The toolless Logica design supports hinge handling without separate tools at the cup connection point, helping streamline door hanging and removal on site.

Using This Half Overlay Hinge In Cabinet Runs

Where This Thick Door Hinge Is Applied

This 94 degree half overlay hinge is classified as a European concealed long arm hinge in the European thick door hinges category, so it suits projects needing hidden hardware on thicker cabinet doors. It is suitable for doors up to 1-1/4 inch thick, which fits many upgraded fronts where standard hinges struggle with clearance. Large overlays up to 24 mm are possible, allowing substantial door coverage over the cabinet side while still maintaining minimal gaps between doors in a run. As a half overlay hinge for both face-frame and frameless thick door applications, it adapts to common construction styles using the same hinge family. The 94 degree opening angle helps control door travel, which is useful where cabinets meet corners or appliances.

How Silentia+ And Adjustments Support Clean Results

The integrated Silentia+ soft-close mechanism, operated by twin silicone-oil dampers, manages the final closing speed of the door so movement stays controlled at the end of travel, reducing door bounce against the frame. Because the soft-close unit sits entirely inside the hinge cup, the mechanism is protected while still providing a clean concealed hinge aesthetic around the cabinet interior. Patented parallel side-to-side adjustment of plus 4.5 mm to minus 1.5 mm via the hinge arm screw lets installers fine-tune reveals after doors are hung, which is especially useful on long cabinet runs where small cumulative errors show. The hinge cup depth of 15.5 mm and edge drilling distance of 3 mm to 9 mm define a clear boring pattern, supporting repeatable CNC or jig-based drilling across multiple doors. All steel nickel plated construction adds corrosion resistance in typical kitchen or shop environments while coordinating with Salice mounting plates, supporting a consistent hardware family across the project.

Common Questions About The C2JBGE9 Hinge

Selecting This Hinge For Thick Overlay Doors

The Silentia Series 200 94 degree half overlay hinge with Logica design combines integrated soft-close action with a concealed hinge cup, giving a clean look and controlled motion on thick doors. Its suitability for doors up to 1-1/4 inch thick and overlays up to 24 mm supports upgraded cabinetry where heavier fronts and tighter reveals are expected. Using the defined 15.5 mm cup depth, 3 mm to 9 mm edge drilling range, and plus 4.5 mm to minus 1.5 mm side-to-side adjustment, installers can plan boring and alignment around a consistent pattern. For projects using Salice mounting plates on face-frame or frameless cabinets, this hinge provides a matching concealed soft-close option for thick door applications.