Mulino pull 128mm center to center describes an Amerock Mulino Series cabinet pull with a 5-1/16 in (128 mm) center-to-center dimension, so hole spacing matches standard drilling for many handle layouts and keeps replacement layout straightforward on existing fronts. The pull length of 6-1/4 in (159 mm) means the grip extends beyond the mounting holes, giving fingers more clearance across wider drawer or door faces. A projection of 1-9/16 in (40 mm) sets the handle off the surface enough to grab comfortably without knuckles running along the front. The Silver Champagne / Black Nickel split finish uses a clean, assembled design that adds contrast across the face of the pull, which can help tie together mixed metal finishes on surrounding decorative hardware. The aluminum material keeps the pull light in weight, which is useful when it is repeated across banks of doors and drawers.
The 5-1/16 in (128 mm) center-to-center measurement sets the mounting hole distance, so installers can match boring jigs and drilling templates to that dimension for repeatable alignment from cabinet to cabinet. With a base length of 1-2 in (13 mm) and a base width of 3/8 in (10 mm), each foot of the pull contacts a controlled area on the door or drawer front, which helps distribute pulling forces along a compact footprint. The 1/2 in (13 mm) bar width keeps the handle slim relative to its 6-1/4 in (159 mm) overall length, so it sits comfortably on narrow rails or stile sections. The 1-9/16 in (40 mm) projection moves the grip away from the surface, which can aid clearance when doors open near adjacent faces or appliance panels.
The Amerock Mulino Series pull belongs to the Handles and Pulls category, so it is suited for doors and drawers where a handle-style pull is required. The 5-1/16 in (128 mm) center-to-center size positions it in a range commonly used on kitchen and bath cabinets, allowing it to sit comfortably across both medium and wider drawer fronts. Its 6-1/4 in (159 mm) length lets the pull span more of the rail, giving a visual line that works on taller doors as well as standard base cabinets. The minimal forms described in the Mulino collection combine clean geometry with an assembled split-finish design, so the pull can support projects that call for simple lines while still adding a defined decorative accent across multiple cabinet runs.
The specific center-to-center dimension of 5-1/16 in (128 mm) allows shop setups to use fixed drilling patterns, which can speed production when repeating the Amerock Mulino pull BP36724SCBN across a job. Having a projection of 1-9/16 in (40 mm) and a bar width of 1/2 in (13 mm) defines a grip profile that stays consistent from cabinet to cabinet, so the feel in hand remains the same throughout the installation. The base length of 1-2 in (13 mm) and base width of 3/8 in (10 mm) concentrate mounting contact at each end, which helps installers position each foot precisely relative to door edges and reveals. The Silver Champagne / Black Nickel finish pairing creates an identifiable look that assists with visual alignment across a room, because repeats of the same finish cue make handle placement appear coordinated.
The Amerock Mulino Series BP36724SCBN pull has a 5-1/16 in (128 mm) center-to-center size, so drilling layouts can be based around that specific hole spacing on doors and drawers.
The Mulino pull measures 6-1/4 in (159 mm) in overall length, giving extra bar beyond the mounting holes for a more generous gripping area across the face.
This aluminum Amerock pull projects 1-9/16 in (40 mm) from the mounting surface, providing stand-off that supports comfortable finger clearance during use.
The Mulino BP36724SCBN pull uses a Silver Champagne / Black Nickel finish, so its split-finish appearance can coordinate with both lighter and darker decorative metal tones.
The Amerock Mulino Series BP36724SCBN pull is made from aluminum, giving it metal construction with modest weight for repeated use across multiple fronts.
Each base on this pull has a length of 1-2 in (13 mm) and a width of 3/8 in (10 mm), focusing the mounting area at the ends of the handle.
The Amerock Mulino Series BP36724SCBN pull combines a 5-1/16 in (128 mm) center-to-center layout, 6-1/4 in (159 mm) overall length, and 1-9/16 in (40 mm) projection in an aluminum body with a Silver Champagne / Black Nickel finish, so it offers a defined set of dimensions and appearance for planned cabinet work. For projects calling for a handle-style pull with clean geometry and a split-finish look, this Mulino pull provides consistent sizing that can be repeated across doors and drawers to keep a job visually and dimensionally aligned.
Sold In: 1 Each
