Amerock Mulino 192mm cabinet pull uses a 7-9/16 in (192 mm) center-to-center dimension, which spaces mounting holes consistently so cabinet doors and drawers line up predictably across a run. The pull length of 8-3/4 in (222 mm) gives good hand clearance along wider fronts, which helps on heavier doors where a full grip is useful. A projection of 1-9/16 in (40 mm) stands the handle off the face enough for fingers to wrap comfortably, which matters when knobs snag sleeves or feel cramped. The Mulino collection design blends clean geometry with an assembled split-finish style, so the same part handles both modern slab fronts and transitional cabinets without visual conflict. Its minimal form keeps profiles simple, which helps maintain a straight, uninterrupted look along banks of cabinets.
The 7-9/16 in (192 mm) center-to-center measurement defines the drilling layout, which lets installers pre-drill or jig doors and drawers for repeatable spacing across a job. With an overall length of 8-3/4 in (222 mm), the pull overhangs the hole centers enough to cover minor drilling deviations, which can help visually mask small layout shifts. A projection of 1-9/16 in (40 mm) keeps the handle clear of the door surface, which reduces knuckle contact against the cabinet face during operation. The slim 1/2 in (13 mm) width and compact 3/8 in (10 mm) by 1/2 in (13 mm) bases allow this pull to fit on narrow frame members, which is important on small drawer fronts or tight rail heights.
The Amerock Mulino Series 7-9/16 in (192 mm) center-to-center pull fits cabinets that can accept the 192 mm drilling pattern, which suits longer drawer fronts and taller doors needing a substantial handhold. Its Silver Champagne / Polished Chrome finish pairs with metallic elements, so it coordinates with stainless or chrome fixtures where a softer champagne tone is also present. The aluminum construction suits decorative cabinet hardware applications, giving a rigid pull for doors and drawers in kitchens, baths, or built-ins. Because the profile is 8-3/4 in (222 mm) long with a narrow 1/2 in (13 mm) width, it can run close to neighboring fronts without dominating the face, which helps maintain a balanced proportion on medium to large panels.
The 192 mm center-to-center layout on this Mulino aluminum cabinet handle sets a standard spacing, which aligns with common drilling jigs for faster, repeatable hole placement across multiple fronts. A 1-9/16 in (40 mm) projection provides consistent finger clearance, which helps users get a firm grip without contacting the cabinet face, especially on heavier drawers. The small 3/8 in (10 mm) by 1/2 in (13 mm) base footprint reduces the flat area needed around each mounting point, which is useful when aligning pulls on narrow rail sections or close to panel edges. The split-finish Silver Champagne / Polished Chrome design keeps the visual center defined, which helps installers visually align the pull parallel to door edges during layout. The Amerock BP36725SC26 part number clearly identifies this exact Mulino configuration, which matters when matching replacements or extending an existing hardware run.
The Amerock Mulino BP36725SC26 pull has a 7-9/16 in (192 mm) center-to-center dimension, which sets the hole spacing for drilling and keeps multiple pulls aligned across cabinets.
The pull length is 8-3/4 in (222 mm), which provides a generous gripping area on wider drawers and doors while covering the 192 mm mounting holes.
This Silver Champagne / Polished Chrome pull projects 1-9/16 in (40 mm) from the cabinet face, giving consistent finger clearance for comfortable operation.
The Mulino 7-9/16 in center-to-center pull is made from aluminum, which provides a solid decorative handle while keeping overall door or drawer weight down.
The pull width is 1/2 in (13 mm), and each base measures 3/8 in (10 mm) length by 1/2 in (13 mm) width, allowing installation on relatively narrow cabinet rails.
The Amerock Mulino BP36725SC26 uses a Silver Champagne / Polished Chrome finish, which creates a split-finish look that coordinates with mixed metallic fixtures.
The Amerock Mulino Series 7-9/16 in (192 mm) center-to-center pull, in Silver Champagne / Polished Chrome, combines a 192 mm drilling pattern with an 8-3/4 in (222 mm) length for projects needing longer cabinet hardware. Its aluminum construction, 1-9/16 in (40 mm) projection, and slim 1/2 in (13 mm) width support comfortable use while keeping fronts visually clean. For jobs calling for the Amerock BP36725SC26 part, this pull matches the Mulino collection geometry and finish so cabinet lines stay consistent from one opening to the next.
Sold In: 1 Each
