Amerock Mulino pull 128mm center to center gives cabinets a defined grip point that aligns with standard 5-1/16 in drilling, which helps match new fronts to existing layouts on many shop-built or factory cabinets. The Mulino collection blends clean geometry with an assembled split-finish design, so each pull adds a precise, modern line across the drawer or door face that supports consistent visual alignment across a run. Its 6-1/4 in overall length extends past the mounting points, creating a solid handhold along the center span that helps with everyday opening forces. A projection of 1-9/16 in stands the handle off the face, creating knuckle clearance in use and making it easier to grab from different angles. At 1/2 in width, the grip presents a slim front view that still gives enough surface for controlled pulls.
The 5-1/16 in (128 mm) center-to-center dimension defines where the mounting holes land, which lets installers position the Mulino pull consistently across doors and drawers that share a boring pattern. A base length of 1-2 in and base width of 3/8 in concentrate the footprint at each mounting point, so the pull sits on small contact pads that simplify layout along narrow rails or slim drawer fronts. With the length at 6-1/4 in, the handle extends beyond the bases, giving room to grip even when the pull is placed close to an edge. The 1-9/16 in projection sets the bar out from the face, which helps when mounting near thicker door edges because fingers can still wrap behind the pull.
This decorative handle from the Mulino collection sits in the Decorative Hardware & Moldings category under handles and pulls, positioning it for cabinet and furniture applications where a defined pull bar is needed. The aluminum construction keeps weight low along the door or drawer edge, which is useful on multiple fronts where several pulls are mounted in a vertical bank. Its black brushed nickel and polished chrome finish combination allows the same part to bridge design transitions, so one model can serve on different cabinet runs that share hardware style. With a 6-1/4 in overall length, the pull suits drawers and doors that benefit from a longer visual line while still using the 128 mm center-to-center drilling common in many shop layouts.
The 5-1/16 in (128 mm) center-to-center drilling on this Amerock Mulino 5-1/16 in pull ties directly into standard metric boring setups, so jigs set for 128 mm spacing can repeat the same hole pattern across the job. Its base width of 3/8 in focuses the contact points, which helps when aligning the pull on narrow stiles because the foot does not crowd neighboring details. A width of 1/2 in across the grip defines a straight reference line that installers can visually align to door or drawer edges, supporting cleaner sight lines. The 1-9/16 in projection maintains consistent stand-off from the face, which keeps hand clearance uniform from one cabinet front to the next. The Amerock Corporation manufacturer part BP36724BBN26 ties these dimensions and finishes to a specific cataloged pull, providing a single reference point when repeating the selection on multiple rooms or phases.
The Amerock Mulino pull BP36724BBN26 has a 5-1/16 in (128 mm) center-to-center, which sets a consistent drilling pattern across cabinet doors and drawers using that spacing.
The handle length is 6-1/4 in (159 mm), so the grip extends past the mounting points and offers more hand contact area along the drawer or door front.
The pull projects 1-9/16 in (40 mm) from the surface, creating finger clearance behind the bar for comfortable opening on doors and drawers.
The BP36724BBN26 Mulino cabinet pull uses a black brushed nickel and polished chrome finish, giving a split-finish look that works with contrasting cabinet colors.
The Amerock Mulino pull is made from aluminum, which keeps each handle light on the door or drawer while still delivering a defined gripping surface.
The grip width is 1/2 in (13 mm), providing a slim profile that still offers a flat surface for fingers when opening cabinets.
The Mulino pull BP36724BBN26 from Amerock Corporation combines a 5-1/16 in (128 mm) center-to-center drilling with a 6-1/4 in overall length, giving a familiar hole pattern with extended grip reach. Its aluminum construction and 1-9/16 in projection balance light weight with hand clearance, while the black brushed nickel and polished chrome finish pairing ties into mixed metal or transitional cabinet schemes. For runs that rely on standard 128 mm boring and value a straight, geometric pull profile, this decorative handle provides a consistent specification that can be repeated across doors and drawers.
Sold In: 1 Each
