Amerock Mulino 192mm pull gives cabinet doors and drawers a straight, geometric grip that suits modern layouts where installers want consistent, repeatable alignment. The pull belongs to the Mulino collection, so its inviting lines match other pieces in the same series for coordinated runs. Its aluminum construction keeps weight down while still providing a solid hand feel when mounted across wider fronts. A silver champagne and black nickel split finish creates a clear visual band, which helps with visual alignment on multiple drawers in a bank. Overall length of 8-3/4 inches gives enough span for full-hand use on larger fronts, while still fitting within standard cabinet widths. A projection of 1-9/16 inches keeps fingers clear of the door face, which helps reduce scuffing in everyday use.
The Mulino pull uses a 7-9/16 inch (192 mm) center-to-center measurement, so hole placement is straightforward when using metric or fractional jigs laid out for that spacing. An overall length of 8-3/4 inches gives some margin beyond the hole spread, which helps visually center the pull on wider drawers without crowding the edges. With a projection of 1-9/16 inches, the grip stands off enough to clear typical door and drawer finger reach, supporting comfortable pull action on thicker fronts. The 1/2 inch width and compact base dimensions help the pull sit neatly on narrow rails, so hardware does not dominate slimmer frame members.
The Amerock Mulino aluminum cabinet pull with 7-9/16 inch center-to-center spacing suits projects built around longer handles, such as wide drawers or tall pantry doors where a full-hand grip is preferred. Its 8-3/4 inch overall length scales well with deeper drawer boxes, allowing handles to span more of the front for balanced appearance. The silver champagne and black nickel finish pairing can bridge between lighter door finishes and darker appliances, so one pull style can run across mixed-material kitchens. At 1/2 inch width, the pull sits cleanly on face-frame and frameless cabinets alike, leaving enough rail exposure around it for a balanced look.
A projection of 1-9/16 inches creates useful knuckle clearance on thicker doors and drawer fronts, which supports smooth, repeatable operation even when hands approach at an angle. The 3/8 inch base length and 1/2 inch base width keep the mounting footprint compact, so the pull can land close to door corners or narrow stile sections without visually overpowering them. Because the pull is part of the Mulino collection, the same geometry and styling can be carried across multiple cabinet zones, helping maintain consistent lines from wall cabinets to base units.
The 192 mm center-to-center layout ties directly to many drilling templates, allowing installers to mark or drill multiple fronts in a production rhythm with reduced layout variation. Having a clear 8-3/4 inch overall length simplifies checking edge clearances and centering pulls on different drawer widths using simple tape measurements. The 1/2 inch width presents a predictable reference band against the door edge, which can be useful when aligning the pull parallel to a stile or countertop line. With a 1-9/16 inch projection, the standoff becomes consistent across all fronts, so doors and drawers sit with matching hardware depth for a unified visual field.
The compact base dimensions give a clear visual cue at each mounting point, which aids in spotting any rotational misalignment before final tightening. Aluminum construction keeps the mass of each pull manageable during installation, making it easier to hold alignment while fastening across long runs of cabinets. The silver champagne and black nickel split finish creates a distinct horizontal or vertical line, depending on orientation, which can serve as an additional sight line when setting hardware heights across a room.
The Amerock Mulino 192 mm pull suits wider drawers and taller doors where its 8-3/4 inch length and 7-9/16 inch center-to-center spacing align with longer hardware layouts.
The 1-9/16 inch projection sets the pull off the front enough to give fingers and knuckles comfortable clearance during daily opening and closing.
The silver champagne and black nickel finish provides a contrasting band that can visually tie lighter cabinet surfaces to darker surrounding elements.
The 7-9/16 inch center-to-center dimension matches a common 192 mm drilling pattern, supporting quick layout using standard jigs or templates.
The 3/8 inch base length and 1/2 inch base width keep mounting points compact, allowing placement near corners or narrow rails without crowding.
The aluminum material keeps the Mulino pull relatively light, which is useful when repeating the hardware across many cabinet fronts.
The Amerock Mulino series 7-9/16 inch center-to-center pull brings a consistent 192 mm drilling pattern, 8-3/4 inch overall length, and 1-9/16 inch projection to cabinet runs that call for clean, repeatable geometry. Its aluminum build and silver champagne with black nickel finish support projects where a single handle style needs to span wide drawers and doors while maintaining clear lines. For cabinet work that values alignment, contrast, and straightforward measurements, this Mulino pull offers a defined set of dimensions you can plan around from the first layout.
Sold In: 1 Each
