Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Mulino pull 192mm center to center describes an Amerock Corporation handle from the Mulino collection that spans 7-9/16 in between mounting holes, giving a long, linear grip for cabinet doors and drawers where a wider handhold is preferred. The pull is made from aluminum, so it provides a solid feel while keeping weight low on the door or drawer front. Its Black Brushed Nickel / Polished Chrome finish combines dark brushed tones with bright chrome surfaces, creating a split-finish look that ties together mixed-metal hinge and faucet selections on the same run. Overall length is 8-3/4 in (222 mm), so the pull visually extends beyond the 192 mm hole pattern, which helps it sit proportionally on larger cabinet fronts. A projection of 1-9/16 in (40 mm) brings the grip off the face enough for fingers to wrap comfortably.
The 7-9/16 in (192 mm) center-to-center measurement defines the drilling layout for this Mulino pull, so installers can use 192 mm boring templates when preparing cabinet doors and drawers. With a projection of 1-9/16 in (40 mm), the pull stands off the surface at a predictable distance that suits standard overlay and inset front thicknesses. The base length of 3/8 in (10 mm) and base width of 1/2 in (13 mm) concentrate the footing at each end, which allows the pull to sit fully on face-frame rails or slab door edges where mounting land is limited. An overall length of 8-3/4 in (222 mm) means the handle extends beyond the fixing points, so alignment marks are referenced from the hole centers rather than the ends during layout.
The Amerock Mulino series handle is part of the Mulino collection, which uses inviting lines and clean geometry, so it suits modern or transitional cabinet styles where straight runs and simple fronts are common. Its 7-9/16 in (192 mm) center-to-center size works well on medium to large cabinet doors and wide drawers, where the extended 8-3/4 in (222 mm) length visually balances broader panels. The 1/2 in (13 mm) width keeps the pull from crowding narrow stiles, allowing it to sit neatly on face frames or frameless slab fronts without overhanging edges. Because the finish is Black Brushed Nickel / Polished Chrome, the pull aligns naturally with installations that mix brushed nickel hinges or slides and polished chrome fixtures, helping maintain a coherent hardware line across kitchens, baths, or shop cabinets.
The defined 7-9/16 in (192 mm) center-to-center dimension supports repeatable drilling using 192 mm jigs, which streamlines production when the same Amerock Mulino cabinet pull is used across an entire job. The 3/8 in (10 mm) base length and 1/2 in (13 mm) base width at each end create compact contact points, making it straightforward to position the pull consistently relative to door edges or rail lines using simple layout marks. A projection of 1-9/16 in (40 mm) keeps every installed handle standing off the surface at the same depth, so gaps between fingers and fronts remain uniform from cabinet to cabinet. The aluminum construction means each BP36725BBN26 Mulino pull keeps hardware weight consistent across a run, which is useful when aligning door swing and drawer action around predictable loads. The combination Black Brushed Nickel / Polished Chrome finish repeats the same split-finish look on every front, helping detailed installers carry a single visual theme through base cabinets, uppers, and tall units.
The Amerock Mulino pull uses a 7-9/16 in (192 mm) center-to-center hole spacing, so mounting holes are bored on that 192 mm pattern for consistent alignment.
The Mulino BP36725BBN26 handle has an overall length of 8-3/4 in (222 mm), which helps it span wider cabinet fronts and align with larger drawer or door faces.
The Mulino cabinet pull is made from aluminum, providing a metal construction that keeps each handle relatively light on cabinet doors and drawers.
The 7-9/16 in cabinet pull projects 1-9/16 in (40 mm) from the surface, creating practical hand clearance between the grip and the cabinet face.
The Amerock Mulino collection handle has a width of 1/2 in (13 mm), giving a slim, linear profile suited to contemporary cabinet front designs.
The pull has a Black Brushed Nickel / Polished Chrome finish, combining a dark brushed surface with bright chrome accents for mixed-metal cabinet layouts.
The Amerock Mulino series 7-9/16 in (192 mm) center-to-center aluminum pull with Black Brushed Nickel / Polished Chrome finish provides a defined drilling pattern, extended 8-3/4 in (222 mm) length, and 1-9/16 in (40 mm) projection suited to contemporary cabinet runs. For projects using 192 mm boring and a mixed brushed nickel and polished chrome hardware scheme, this BP36725BBN26 handle offers a consistent Mulino collection profile across doors and drawers.
Sold In: 1 Each
