Amerock Mulino 10-1/16 in pull uses a 256 mm center-to-center mounting layout, which spreads the load across the door or drawer front for stable operation on larger faces. The handle length of 11-1/4 in gives ample grip area, which helps when opening heavier cabinet doors or wide drawers. A 1-9/16 in projection sets the hand away from the surface, which creates clearance for fingers and reduces knuckle contact on adjacent faces. The 1/2 in width presents a slim profile, which keeps the look clean while still offering enough bearing surface for a comfortable pull. A base length of 3/8 in and base width of 1/2 in concentrate the mounting footprint, which is useful when working near panel edges or narrow rails. The aluminum material keeps weight down, which reduces stress on mounting points over repeated use.
The 10-1/16 in center-to-center drilling equals 256 mm, which matches common long-pull layouts on wider cabinet doors and large drawers. This dimension guides drilling jigs and CNC programs, which helps maintain consistent hole spacing across a job. An overall length of 11-1/4 in means the pull overhangs the drilled span at each end, which visually anchors the handle and gives installers some visual tolerance while aligning it parallel to door edges. The 1-9/16 in projection keeps the hand away from the cabinet face, which supports use on deeper face frames and thicker doors. The 1/2 in width and matching 1/2 in base width keep the pull compact across the grain, which is useful on narrow rails or when lining up near panel profiles.
The Mulino collection description highlights inviting lines driven by simplicity, which suits modern and transitional cabinet layouts where straight runs and flat fronts are common. The Black Brushed Nickel / Polished Chrome finish combines darker brushed surfaces with polished accents, which works in spaces that mix stainless-look components with darker fixtures. The 256 mm center-to-center dimension targets wider doors and drawer fronts, which are typical on base cabinets, tall pantry units, and appliance panels that benefit from a longer grip. The 11-1/4 in overall length stretches across more of the door face, which helps visually balance large fronts while giving users a predictable grab point. The 1-9/16 in projection is well suited to doors near adjacent walls, because it offers hand clearance without projecting excessively into walking paths.
The 10-1/16 in (256 mm) center-to-center specification provides a precise drilling reference, which lets installers set up templates or CNC routines for repeatable hole patterns across many cabinet fronts. The aluminum construction responds predictably to standard machine screws, which supports consistent tightening torque along a bank of doors. The base length of 3/8 in and base width of 1/2 in define a compact contact zone, which helps when aligning the pull on narrow frame members or inset panels where space is limited. The declared projection of 1-9/16 in and 1/2 in grip width allow installers to visualize door swing clearance relative to adjacent fronts, which reduces the chance of handles clashing on corner cabinets. The Black Brushed Nickel / Polished Chrome finish provides a defined color and sheen target, which helps designers coordinate hinges and other visible hardware so the finished installation reads as a unified system.
The Amerock Mulino pull uses 10-1/16 in (256 mm) center-to-center spacing, which aligns with common long-pull layouts and supports accurate drilling using standard cabinet hardware jigs.
The Amerock BP36726BBN26 pull measures 11-1/4 in long, which visually balances wider cabinet doors and drawers while providing a generous hand grip across the face.
The Mulino pull projects 1-9/16 in from the mounting surface, which creates comfortable finger clearance and helps prevent hands from rubbing against door or drawer fronts.
This Mulino pull has a Black Brushed Nickel / Polished Chrome finish, which blends a darker brushed tone with bright chrome accents for mixed-metal cabinet environments.
The Amerock Mulino 256 mm pull is made from aluminum, which keeps the handle light while maintaining rigidity for everyday cabinet door and drawer operation.
The pull has a 1/2 in width with a 3/8 in base length and 1/2 in base width, which suits narrow rails and offers a compact mounting footprint on cabinet fronts.
The Amerock Mulino 10-1/16 in pull combines a 256 mm center-to-center layout, 11-1/4 in overall length, and 1-9/16 in projection, which suits wider doors and drawers needing a longer grip. Aluminum construction and a Black Brushed Nickel / Polished Chrome finish give a defined material and color specification, which supports coordinated hardware selection across a project. The Mulino collection design with clean geometry and split-finish styling provides a consistent visual theme, which helps installers and designers align multiple cabinet zones around one handle choice.
Sold In: 1 Each
