Nova Pro Scala H186 Drawer Member Set with 154lb Capacity, Full Extension, Soft-Closing, 7-5/16", Ice, 16

Nova Pro Scala H186 Drawer Member For Deep Storage

Nova Pro Scala H186 drawer member sets up a slim, deep drawer side that creates tall storage while keeping sidewalls narrow, so cabinet builders gain usable internal width for organizing taller items in a controlled space.

The 7-5/16 inch drawer side height forms a deep drawer box that holds higher fronts up to 780 mm, keeping tall facades supported along their full stroke so fronts track smoothly without racking under normal use.

The 16 inch (400 mm) length delivers full extension travel, bringing the drawer completely out of the cabinet opening so installers expose the entire interior for easier access and visual check of stored contents during daily operation.

A dynamic load capacity of 154 lb (70 kg) supports heavy contents while the full-extension action carries that weight across the entire slide, so the drawer can be used for dense items without sacrificing reach to the back.

The soft-close damping system slows the last part of the closing movement, so heavy fronts and contents settle against the cabinet without slamming, which helps protect fronts, joinery, and installed alignment over repeated cycles.

Integrated height, side, and tilt adjustments built into the system let installers fine-tune the front position on-site, so reveals can be aligned cleanly across a run without re-drilling or rebuilding the drawer box.

The system is compatible with Tipmatic Soft-close, so shops using mechanical push-to-open solutions can pair this drawer member with that function and maintain the same running performance across handle-free applications.

Fully synchronized slide technology coordinates both slide members as the drawer moves, which creates a smooth, even feel across the travel and supports precise movement when the drawer is loaded on one side.

This drawer member set is part of the Grass Nova Pro Scala drawer system from Grass America, so it fits into that family workflow for shops already building around Nova Pro Scala components.

Key Nova Pro Scala Features For Cabinet Shops

• The slim, deep drawer side design opens interior space while preserving sidewall height, which lets fabricators fit more into standard cabinet widths without sacrificing containment for tall stored items.
• High stability up to a front height of 780 mm keeps tall fronts guided over the full motion, which is important for large pantry drawers or high-front base cabinets that see frequent, heavy use.
• Full extension travel on the 16 inch member brings the back of the drawer forward, improving access and reducing the need to overbuild cabinet depths just to reach stored items at the rear.
• Integrated height, side, and tilt adjustments allow front alignment from the installed position, so fine-tuning reveals and correcting small carcass variances can be handled quickly at the jobsite or shop.
• Available dynamic load capacities of 88 lb and 154 lb give specifiers a way to match slide rating to cabinet duty, so lighter drawers and heavy storage can stay within the same Nova Pro Scala platform.
• The soft-close damping system manages closing force on loaded drawers, which helps maintain quieter operation and supports long-term performance of door and drawer fronts in active spaces.
• Compatibility with Tipmatic Soft-close supports handle-free push-to-open installations, so designers can combine a mechanical opening feature with soft-closing action in one coordinated system.
• Fully synchronized slide technology evens out left-right motion under load, which improves perceived quality for the end user and reduces chances of binding when drawers are asymmetrically filled.

Installation And Adjustment For Consistent Drawer Fit

The 16 inch (400 mm) dynamic drawer member length ties directly into standard cabinet depths, so layout work remains straightforward when planning base and tall cabinets around this Grass Nova Pro Scala component.

The 7-5/16 inch drawer side height establishes the key dimension for drawer box construction, giving builders a fixed reference when designing side panels, back pieces, and front overlay relationships for deep drawers.

Integrated height adjustment lets installers raise or lower the front relative to the drawer box, which is useful for dialing in vertical gaps between adjacent fronts without remounting the drawer.

Side adjustment gives lateral movement of the front, letting the installer shift it left or right to create even reveals between neighboring units, which is especially important in high-visibility banks of drawers.

Tilt adjustment allows the top of the front to be angled slightly, so minor carcass or floor irregularities can be compensated at the hardware level, maintaining parallel lines across stacked drawers.

Tool-free drawer front removal and installation simplifies handling, allowing shops to transport cabinets and fronts separately and then lock fronts on during finishing stages without specialized drivers.

The soft-close damping system operates within the slide mechanism, so installers do not have to add separate dampers when specifying this Nova Pro Scala H186 drawer member set.

The dynamic load capacity rating up to 154 lb provides clear guidance for how this member behaves when the drawer is fully extended under working loads in residential or light commercial cabinetry.

Using Grass Nova Pro Scala In Real Projects

Where This Slim Deep Drawer Side Performs Best

The slim, deep drawer side layout from the Nova Pro Scala H186 drawer member is well suited to base cabinets and tall units that require high fronts, because the 7-5/16 inch side height supports deep storage while keeping overall width efficient.

High stability up to a 780 mm front height makes this system appropriate for tall pantry-style drawers, since the hardware is designed to carry higher facades without excessive deflection during normal opening and closing cycles.

The 16 inch full extension lets kitchen and bath installations use common cabinet depths while still delivering full access, so designers can plan storage near walls or appliances without having to oversize the cabinet carcass.

The available 154 lb dynamic capacity gives this drawer member set a place in applications that regularly hold heavy items, because the running gear is rated to move that load through the entire extension stroke.

Soft-close damping adds value in living spaces and work areas where drawers are opened and shut frequently, since the mechanism meters closing speed and lets end users push drawers closed in a single motion.

Compatibility with Tipmatic Soft-close means this member integrates into push-to-open projects, so handle-free fronts in modern cabinetry can pair mechanical opening with the same controlled closing behavior.

Fully synchronized slide technology supports these applications by coordinating both sides of the drawer, which is particularly useful in wide drawer formats that may be loaded unevenly in everyday use.

How Nova Pro Details Support Repeatable Results

The integrated height, side, and tilt adjustment features in the Nova Pro Scala H186 drawer member give shops repeatable control over front alignment, because fine-tuning happens at the hardware instead of through iterative drilling or shimming.

Height adjustment lets crews set consistent vertical gaps across a run of drawers referenced from a single datum, which speeds installation and helps printed layout dimensions translate directly into finished reveals.

Side adjustment enables small lateral corrections after the drawer box is mounted, so small variations in carcass construction or slide placement can be corrected without remaking the drawer components.

Tilt adjustment offers another layer of refinement, allowing fronts to follow slightly out-of-true openings while still presenting parallel lines to neighboring doors, which is important in long cabinet runs.

Tool-free drawer front removal and installation simplifies rework and finishing sequences, since fronts can be detached quickly to adjust, refinish, or transport, then reinstalled with the adjustment settings still available.

The fully synchronized slide action supports these adjustments by keeping the drawer movement even once alignment is set, so the tuned reveals hold over the full extension and retraction stroke under everyday usage.

The 16 inch dynamic member length and the 154 lb capacity work together to keep that movement consistent at typical kitchen depths, so wide or heavily loaded drawers continue to track according to the adjustments made during setup.

Because the system belongs to the Grass Nova Pro Scala drawer family, shops standardizing on this platform can reproduce the same adjustment workflow across multiple cabinet lines.

Common Questions About This Nova Pro Member

Selecting This Nova Pro Scala Member For Your Job

The Nova Pro Scala H186 drawer member set with 16 inch full extension, 7-5/16 inch tall slim sides, and up to 154 lb dynamic capacity gives shops a clear option for deep, heavy-duty drawers with soft-close performance.

High stability up to a 780 mm front height and fully synchronized slide technology support tall, wide fronts in modern cabinetry, while integrated height, side, and tilt adjustments streamline front alignment on-site.

For projects built around the Grass Nova Pro Scala drawer system, this Ice finish member lets fabricators align storage capacity, running action, and adjustment control within a single, consistent hardware platform.