Rev-A-Shelf maple cutlery drawer gives you a two-level way to organize flatware and utensils in an existing cabinet drawer opening. This wood drawer system is a pre-assembled maple drawer box from Rev-A-Shelf Corporation with a clear coat finish for durability. It is built as a drawer box no slide configuration, so drawer slides are not included. The top tier slides back inside the cabinet on ball-bearing drawer slides once compatible slides are added. This unit is designed for an eighteen inch cabinet cutlery drawer application with a 15 inch opening, and it is intended for 1-1/2 inch face frame cabinet construction only. Adjustable door mount brackets are included and required for operation, and the unit is made to accept your existing cabinet drawer front.
Key specs to confirm: This Rev-A-Shelf wood drawer system is listed at 14-1/2 inches wide and is designed for an 18 inch cabinet with a 15 inch opening. It is for 1-1/2 inch face frame cabinet construction only. The product is supplied without slides, so you need to confirm slide compatibility for your cabinet and for a 5/8 inch sidewall and drawer front setup. Because this is a door mount cutlery drawer, verify that your existing cabinet drawer front can be attached correctly and that the opening allows the top tier to slide back inside the cabinet. Load rating, slide specifications, and any compliance details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled maple wood drawer box, adjustable door mount brackets, and a clear coat finish. Drawer slides are not included. The unit is intended to work with your existing cabinet drawer front.
What to verify before ordering: Confirm cabinet opening size, face frame construction, drawer width needs, slide type you plan to use, 5/8 inch sidewall and drawer front compatibility, and whether your existing drawer front and door mount setup match this unit. Follow manufacturer installation guidance and local building requirements where applicable.
A two-tiered cutlery drawer is often chosen when a kitchen already has a standard drawer opening but needs better utensil organization without changing the cabinet layout. This Rev-A-Shelf maple cutlery drawer is built for that kind of upgrade. The drawer box comes pre-assembled, so the installer is not building a box from parts on site. That can simplify a cabinet cutlery drawer replacement when the goal is to remove an existing drawer and fit a new organizer-style unit into the same opening.
This product is especially relevant for face frame cabinet drawer applications. The verified fit note matters: it is for 1-1/2 inch face frame cabinet construction only. Buyers working on frameless cabinets or different face frame dimensions should confirm compatibility before ordering rather than assuming it will adapt. The listed application is an eighteen inch cabinet cutlery drawer setup with a 15 inch opening, which gives a clear starting point for measuring.
The door mount cutlery drawer format also helps in kitchens where the original drawer front should remain in place for a matched look. Rev-A-Shelf includes adjustable door mount brackets, and those brackets are required for operation. The product description also states that you simply attach your existing cabinet drawer front to the unit. For remodelers and service pros, that means the visible cabinet style can stay consistent while the inside storage changes.
Another practical use case is when the buyer wants a drawer box no slide configuration. Some installers prefer to supply their own slides to match the rest of the kitchen or to meet jobsite standards. This wood drawer system supports that approach because slides are not included. The buyer does need to confirm slide selection for a 5/8 inch sidewall and drawer front application. If slide travel, load capacity, or exact mounting details matter for the project, those details should be checked in current technical documentation before purchase.
When buyers compare cutlery storage options, the main differences usually come down to whether the unit is assembled or flat packed, whether it uses one level or two, whether the cabinet front can be reused, and whether slides are included. This Rev-A-Shelf wood drawer system is clearly positioned as a pre-assembled, two-tier maple drawer box that accepts an existing drawer front and requires separate slide selection. That combination can make sense for projects where the installer wants control over slide choice and needs a finished wood interior rather than a plastic insert.
The maple wood construction and clear coat finish are verified details that support a consistent cabinet interior appearance. The top tier sliding back inside the cabinet is another important product-type advantage because it allows access to stored items in a compact drawer opening. Generic organizer trays may divide utensils, but they do not replace the drawer box itself. This product does.
For buyers who value predictable fit, the strongest point is the explicit application guidance. Rev-A-Shelf states that this unit is designed for an 18 inch cabinet with a 15 inch opening and for 1-1/2 inch face frame cabinet construction only. That kind of fit guidance helps narrow the decision before ordering. At the same time, because slides are not part of the package, a careful buyer should treat slide compatibility as a required confirmation step, not an assumption.
This Rev-A-Shelf cutlery drawer is designed for an 18 inch cabinet with a 15 inch opening and for 1-1/2 inch face frame cabinet construction only.
This drawer box is sold without slides. The buyer must supply compatible slides for a 5/8 inch sidewall and drawer front application.
This Rev-A-Shelf wood drawer system is designed so you can attach your existing cabinet drawer front to the unit.
This face frame cabinet drawer is for 1-1/2 inch face frame cabinet construction only.
The top tier of this two-tiered cutlery drawer slides back inside the cabinet on ball-bearing drawer slides when compatible slides are installed.
This door mount cutlery drawer includes adjustable door mount brackets, and those brackets are required for operation.
This Rev-A-Shelf maple cutlery drawer is made from maple wood and has a clear coat finish.
This product is a pre-assembled drawer box that replaces your existing drawer rather than a loose insert tray.
This cabinet cutlery drawer replacement requires confirmation of cabinet opening width, face frame construction, slide compatibility, and fit for your existing drawer front.
Load rating and compliance details are not provided here. Follow manufacturer installation guidance and local building requirements where applicable.
Door mount cutlery drawer selection starts with fit. This Rev-A-Shelf maple cutlery drawer is a fully assembled maple wood drawer box for an 18 inch cabinet with a 15 inch opening and 1-1/2 inch face frame construction. Adjustable door mount brackets are included, while drawer slides are not. Before purchase, confirm your cabinet opening, slide choice for a 5/8 inch sidewall and drawer front setup, and whether your existing drawer front will mount correctly. Those checks help you order the correct cabinet cutlery drawer replacement the first time.
Sold In: 1 Each