Rev-A-Shelf 4WTCD Series 19-1/2"W Maple Cutlery Drawer, Door Mount - 4WTCD-495HFL-1
Description
Choose a Rev-A-Shelf cutlery drawer
Rev-A-Shelf maple cutlery drawer gives you a structured way to add more utensil storage inside an existing cabinet drawer opening. This wood drawer system is a pre-assembled two-tier cutlery drawer made from natural maple with a semi-gloss finish. It is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers, and it mounts to the cabinet drawer front, rear, and side walls. The sliding top tray helps separate frequently used items from lower storage, while the lower section and upper tray each offer up to seven compartments. For buyers replacing a base cabinet drawer insert or planning a drawer front mount setup, this maple drawer organizer is built as a complete drawer system that only needs a drawer front added before installation.
Use this wood drawer system better
- Two-tier drawer design - The tiered layout helps you separate flatware and kitchen tools while making better use of drawer height.
- Pre-assembled drawer box - The Rev-A-Shelf cutlery drawer arrives ready to install into an existing cabinet drawer opening, which can reduce setup time on site.
- Designed for base cabinet drawers - This kitchen cabinet cutlery drawer is made for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers.
- Natural maple construction with semi-gloss finish - The maple drawer organizer provides a wood interior appearance suited to cabinet upgrades and replacement projects.
- Up to seven lower compartments - The main drawer section helps organize cutlery and utensils into separate zones for faster access.
- Sliding top tray with up to seven compartments - The upper tier adds another layer of storage without requiring a second drawer opening.
- Mounts to cabinet drawer front, rear, and side walls - The door mount cutlery drawer is built for secure attachment inside the cabinet drawer area.
- Figure 8 door mount brackets - The included mounting hardware supports drawer front attachment for a cleaner finished installation.
- TSCA Title VI compliant - This wood drawer system meets the listed compliance requirement stated by the manufacturer.
- Complete drawer system, just add your drawer front - Buyers can match the visible drawer front to the surrounding cabinetry while using the included internal drawer components.
Confirm kitchen cabinet cutlery drawer fit
Key specs to confirm: This two-tier cutlery drawer is listed as a 19-1/2 inch wide maple cutlery drawer, and the product data also references 19.03 inches in the SAP description. Buyers should confirm the exact opening size needed for their cabinet before ordering. This unit is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers, and it installs into an existing cabinet drawer opening. Confirm drawer opening width, interior depth, side clearance, rear clearance, and the space needed for the sliding top tray. If load capacity or any additional compliance details matter for your project, those details should be confirmed with the manufacturer or technical documentation.
What's included: A pre-assembled natural maple drawer box with semi-gloss finish, sliding top tray, compartmented lower section, and Figure 8 door mount brackets are verified. The system is described as complete, with the buyer adding the drawer front.
What to verify before ordering: Confirm your cabinet type is a base cabinet drawer application, verify the opening size and internal clearances, make sure your drawer front plan matches the mounting method, and check whether your project needs any additional installation hardware or technical documentation.
Plan around two-tier cutlery drawer use
Match tiered utensil drawer to daily use
A two-tier cutlery drawer is useful when a standard single drawer no longer keeps utensils sorted or easy to reach. In many kitchens, the main pain point is not just lack of width, but poor use of vertical space. This Rev-A-Shelf maple cutlery drawer addresses that by adding a sliding top tray above a compartmented lower section. Both levels offer up to seven compartments, so a buyer can separate forks, spoons, knives, serving pieces, and small tools in a more controlled layout.
This setup can make sense for remodel work, replacement of a worn base cabinet drawer insert, or a cabinet shop project where the visible drawer front must match existing cabinetry. Because the drawer box comes pre-assembled, installers can focus on confirming fit and attaching the front rather than building an organizer from scratch. The verified mounting method also matters here. This door mount cutlery drawer mounts to the cabinet drawer front, rear, and side walls, which helps define how it integrates into the cabinet structure.
For homeowners and trade buyers looking for a maple drawer organizer, the natural maple construction with semi-gloss finish offers a wood interior rather than a plastic insert. That can be a practical choice when the interior finish matters as much as organization. The product is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers, so it is aimed at common kitchen cabinet drawer sizes, but the exact opening and clearance still need to be checked before purchase. If your project has unusual drawer hardware, limited depth, or a custom front thickness, those details should be verified in advance.
Another common use case is increasing storage density without changing the cabinet layout. A tiered utensil drawer can help when a kitchen has enough drawer width but not enough separate drawers. Instead of adding another cabinet, this wood drawer system uses one opening more efficiently. Buyers should still confirm the exact width requirement, since the listing references both 19-1/2 inches and 19.03 inches in the verified data.
Compare wood drawer system install factors
When buyers compare this type of wood drawer system to other organizer formats, the main differences usually come down to construction, mounting method, and how much of the drawer opening is actually used. A pre-assembled Rev-A-Shelf cutlery drawer gives a defined internal layout and a finished maple build, rather than leaving the installer to assemble multiple loose divider parts. That can support more consistent installation results when the cabinet opening is properly measured first.
The sliding upper tray is another practical difference. Some drawer organizers only divide the base level, which can leave unused space above the utensils. This two-tier cutlery drawer uses that upper area for added compartments, which is helpful in kitchens where flatware, serving tools, and prep items all compete for the same drawer. Since the product is sold as a complete drawer system that requires the buyer to add a drawer front, it also fits projects where the visible face must match existing cabinet doors and drawer fronts.
Material is another point buyers often weigh. This product is a natural maple drawer organizer with a semi-gloss finish, so it is intended for buyers who want a wood interior appearance. The verified TSCA Title VI compliant note may also matter to some projects where listed material compliance details are reviewed during purchasing. Beyond that, buyers should avoid assuming unlisted specifications. If exact depth tolerance, slide details, or load rating are critical, those should be confirmed directly from manufacturer documentation before ordering.
In short, this kitchen cabinet cutlery drawer is best evaluated by checking cabinet opening size, confirming the mounting approach, and deciding whether a tiered wood organizer matches the way the drawer will be used every day.
Check cutlery drawer fit before ordering
Will this cutlery drawer fit any kitchen drawer?
This kitchen cabinet cutlery drawer is designed for 15 inch, 18 inch, 21 inch, and 24 inch base cabinet drawers, but the actual opening and internal clearance must be confirmed before ordering.
Does this Rev-A-Shelf drawer come assembled?
This Rev-A-Shelf maple cutlery drawer comes pre-assembled and ready to install into an existing cabinet drawer opening.
Is the drawer front included?
This wood drawer system is described as a complete drawer system, and the buyer adds the drawer front.
How does this drawer mount inside the cabinet?
This door mount cutlery drawer mounts to the cabinet drawer front, rear, and side walls and includes Figure 8 door mount brackets.
How many compartments does the drawer have?
This two-tier cutlery drawer features up to seven compartments in the lower drawer and up to seven compartments in the sliding top tray.
What material is this cutlery drawer made from?
This Rev-A-Shelf cutlery drawer is made from natural maple and has a semi-gloss finish.
What should I measure before I order?
This tiered utensil drawer requires you to verify drawer opening width, interior depth, side clearance, rear clearance, and space for the sliding top tray.
Is this product compliant with TSCA Title VI?
This wood drawer system is listed as TSCA Title VI compliant in the verified product data.
Can I use this for a replacement drawer organizer project?
This maple drawer organizer can work for replacement projects if the existing cabinet drawer opening and mounting conditions match the product requirements.
Are slide details or load ratings provided?
This product listing does not provide slide details or load ratings, so those should be confirmed with the manufacturer or technical documentation. Follow manufacturer installation guidance and local building requirements where applicable.
Order the right maple cutlery drawer
Rev-A-Shelf maple cutlery drawer is a practical choice when you need a pre-assembled, two-tier organizer for an existing base cabinet drawer opening. The verified package includes the maple drawer box, sliding top tray, and Figure 8 door mount brackets, while the drawer front is added separately. Before purchase, confirm the cabinet opening size, internal clearance, and mounting plan, especially since the listing references both 19-1/2 inches and 19.03 inches. Matching those details first helps avoid fit issues and keeps installation straightforward.