Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rev-A-Shelf maple cutlery drawer adds organized utensil storage to an existing cabinet drawer opening with a pre-assembled two-tier design. This wood drawer system is made from natural maple with a semi-gloss finish and is built for base cabinet drawers in 15 in., 18 in., 21 in., and 24 in. cabinet sizes. The drawer front mount organizer design attaches to the cabinet drawer front, rear, and side walls, and Figure 8 door mount brackets are included. The sliding top tray and lower tray provide up to seven compartments each, giving this kitchen cutlery storage drawer more usable separation than a flat insert. The Rev-A-Shelf 4WTCD series is supplied as a complete drawer system, with the drawer front added separately.
Key specs to confirm: This Rev-A-Shelf 4WTCD series unit is a 16-1/2 in. wide maple cutlery drawer and is designed for existing base cabinet drawer openings associated with 15 in., 18 in., 21 in., and 24 in. base cabinet drawers. Confirm your actual drawer opening, inside cabinet clearance, and drawer front requirements before ordering. This product uses 5/8 in. drawer side material and mounts to the cabinet drawer front, rear, and side walls. Because this is a two-tier unit with a sliding top tray, buyers should also verify vertical clearance for tray movement and access. If load limits, detailed dimensional tolerances, or other compliance details are required for your job, confirm them with the manufacturer or technical documentation.
What's included: One pre-assembled two-tier maple cutlery drawer system with natural maple construction, semi-gloss finish, sliding top tray, and Figure 8 door mount brackets. The drawer front is not included and must be added separately.
What to verify before ordering: Check cabinet drawer opening size, inside width, inside height, side-wall mounting space, compatibility with your chosen drawer front, and whether your application matches the intended base cabinet drawer sizes.
A two-tier cutlery drawer is often chosen when a standard flat insert no longer keeps up with the amount of flatware and kitchen tools used every day. In busy kitchens, one shallow organizer can force users to stack utensils, mix serving pieces with daily silverware, or give up drawer space that could be used more efficiently. This Rev-A-Shelf maple cutlery drawer addresses that problem by dividing one drawer opening into two working levels.
The lower section offers up to seven compartments for separating forks, spoons, knives, and larger serving items. The sliding top tray adds up to seven more compartments above, which helps create a cleaner layout for households or projects that need more than a basic tray. Because the top section slides, users can reach the lower section without removing the organizer. That makes this kitchen cutlery storage drawer useful in remodels where the goal is to improve access without rebuilding the cabinet box.
This product also fits buyers who want a finished wood interior instead of a loose plastic insert. The natural maple construction and semi-gloss finish make it suitable for cabinet packages where the inside appearance matters as much as organization. Installers may also prefer that the drawer box comes pre-assembled, since that can shorten installation time in the field. The included Figure 8 door mount brackets support attachment to the drawer front, but the visible drawer front itself must be supplied separately to match the cabinet run.
For replacement or upgrade work, the most important step is confirming fit. A base cabinet drawer insert or drawer box can look correct by cabinet size but still fail if the actual opening, side-wall space, or height clearance is off. Since this is a door mount cutlery drawer with a sliding upper tray, buyers should confirm both horizontal fit and vertical movement before purchase.
Compared with a basic single-level organizer, this wood drawer system gives the buyer a structured way to store more items in the same drawer opening. A simple tray may work for light use, but it usually leaves less flexibility when the drawer needs to hold both daily flatware and larger serving pieces. The two-tier format helps separate those categories while keeping them in one location.
Compared with loose inserts, a pre-assembled Rev-A-Shelf 4WTCD series drawer system can be a better match for projects where a more fixed installation is preferred. The unit is designed to mount to the cabinet drawer front, rear, and side walls, which is different from drop-in organizers that can shift during use. That mounting style can matter for installers who want a more integrated result inside the cabinet.
Material also affects buyer choice. This product uses natural maple with a semi-gloss finish, so it suits buyers looking for a wood interior component rather than a molded organizer. It is also useful that the product data clearly identifies intended base cabinet drawer sizes and notes that the drawer front must be added separately. Those details help set expectations before ordering. Where exact dimensional tolerances or other technical requirements are needed, the buyer should verify them directly so the selected drawer system matches the cabinet opening and installation plan.
This Rev-A-Shelf cutlery drawer is designed for 15 in., 18 in., 21 in., and 24 in. base cabinet drawers.
This wood drawer system comes pre-assembled and ready to install into an existing cabinet drawer opening.
This Rev-A-Shelf drawer system does not include the drawer front. The product is described as a complete drawer system, just add your drawer front.
This door mount cutlery drawer mounts to the cabinet drawer front, rear, and side walls and includes Figure 8 door mount brackets.
This tiered cutlery drawer features up to seven compartments in the drawer and up to seven compartments in the sliding top tray.
This Rev-A-Shelf maple cutlery drawer is made from natural maple and has a semi-gloss finish.
This two-tier cutlery drawer should be checked for vertical clearance because the sliding top tray needs room to operate inside the cabinet opening.
This base cabinet drawer insert should be matched to the actual cabinet opening, side-wall space, and drawer front plan, not width alone.
This product listing does not provide load ratings or full technical tolerances. Follow manufacturer installation guidance and local building requirements where applicable.
Two-tier cutlery drawer selection starts with fit. Confirm that your cabinet opening matches the intended base cabinet drawer size, that you have room for the sliding upper tray, and that your project includes a compatible drawer front. This Rev-A-Shelf maple cutlery drawer includes the pre-assembled wood drawer system and Figure 8 door mount brackets, but the front panel is added separately. Verifying opening size, mounting space, and front compatibility before purchase helps avoid delays during installation.
Sold In: 1 Each
