Rev-A-Shelf maple cutlery drawer adds organized storage to a kitchen cabinet by using a two-tier layout inside one cabinet drawer opening. This wood drawer system is a pre-assembled drawer box made from maple wood with a clear coat finish for durability. The design is made for a 24 inch cabinet with a 21 inch opening and for 1-1/2 inch face frame cabinet construction only. Adjustable door mount brackets are included and required for operation, and the top tier slides back inside the cabinet on ball-bearing drawer slides. This unit replaces an existing drawer and lets you attach your current drawer front. Drawer slides are not included, so buyers must supply their own slides for a 5/8 inch sidewall and drawer front.
Key specs to confirm: This two-tiered cutlery drawer is designed for a 24 inch cabinet with a 21 inch opening and for 1-1/2 inch face frame cabinet construction only. The listed drawer width is 20-1/2 inches. Buyers should confirm the cabinet opening size, face frame construction, available interior depth for the sliding upper tier, and whether their cabinet can accept a door mount cutlery drawer. Because drawer slides are not included, confirm that your selected slides are appropriate for a 5/8 inch sidewall and drawer front. Load details, compliance information, and any unlisted technical limits should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled maple wood drawer box with clear coat finish and adjustable door mount brackets. Drawer slides are not included.
What to verify before ordering: Check cabinet width and opening, confirm 1-1/2 inch face frame construction, verify that your existing drawer front can be attached, and make sure you have compatible slides for a 5/8 inch sidewall and drawer front.
A two-tiered cutlery drawer is useful when a standard drawer leaves wasted vertical space but the cabinet footprint cannot change. In that situation, this Rev-A-Shelf maple cutlery drawer gives the cabinet a second storage level without adding another drawer bank. The upper tier slides back inside the cabinet on ball-bearing drawer slides, which helps the user reach items stored below. That layout works well for separating everyday flatware from serving pieces, prep tools, or specialty utensils.
This product also fits buyers who want a drawer box replacement instead of a full cabinet rebuild. The unit comes as a pre-assembled drawer box, so the installer does not need to build a wood drawer system from raw parts. The existing cabinet drawer front attaches to the unit, which helps keep the cabinet exterior consistent with the rest of the kitchen. For remodel work, that can save time and avoid the mismatch that comes from replacing visible fronts.
Fit is the main issue to confirm before purchase. This door mount cutlery drawer is made for a 24 inch cabinet with a 21 inch opening and for 1-1/2 inch face frame cabinet construction only. Buyers should also check that the cabinet interior has the depth and clearance needed for the top tier to slide back. Because the slides are not included, this product is a better match for installers who already have a preferred slide package or who need to match existing hardware requirements. The product description states that you add your own slides for a 5/8 inch sidewall and drawer front, so that measurement should be checked before ordering.
Compared with a basic single-level drawer box, this wood drawer system is built around access and organization inside one opening. The second tier can improve utensil separation while still using the same cabinet location. A standard drawer may be simpler, but it does not provide the same layered storage approach described for this Rev-A-Shelf unit.
Another difference is installation style. This is a door mount cutlery drawer with adjustable door mount brackets included, and those brackets are required for operation. Buyers looking at generic replacement drawers should confirm whether those products are intended for door mounting or only for fixed drawer fronts. This product is also supplied fully assembled, which may reduce shop time for installers who want a ready-to-fit drawer box rather than a knocked-down kit.
The included and excluded parts matter as well. This Rev-A-Shelf drawer box includes the assembled maple unit and door mount brackets, but drawer slides are not included. That is useful when the installer wants to choose slide hardware separately, but it also means the order is not complete until slide compatibility is confirmed. For buyers comparing options, the practical choice often comes down to cabinet construction, opening size, and whether a two-tier layout is worth the extra planning. If the cabinet matches the verified fit requirements, this maple cutlery drawer offers a clear path to adding more organized storage in the same cabinet space.
This Rev-A-Shelf cutlery drawer is designed for a 24 inch cabinet with a 21 inch opening and 1-1/2 inch face frame cabinet construction only.
This wood drawer system does not include drawer slides. Buyers need to supply their own slides for a 5/8 inch sidewall and drawer front.
This Rev-A-Shelf drawer box is made so you can attach your existing cabinet drawer front to the unit.
This door mount cutlery drawer includes adjustable door mount brackets, and those brackets are required for operation.
This maple cutlery drawer is for 1-1/2 inch face frame cabinet construction only. Confirm your cabinet build before ordering.
The top tier of this two-tiered cutlery drawer slides back inside the cabinet on ball-bearing drawer slides.
This pre-assembled drawer box arrives fully assembled, which can simplify installation in an existing cabinet drawer opening.
This drawer box replacement requires you to verify cabinet width, opening size, face frame construction, slide compatibility, and clearance for the upper tier to slide back.
This product data does not list load or compliance details. Follow manufacturer installation guidance and local building requirements where applicable.
Door mount cutlery drawer selection starts with fit. This Rev-A-Shelf unit includes the fully assembled maple drawer box and adjustable door mount brackets, but it does not include drawer slides. Before purchase, confirm the 24 inch cabinet application, 21 inch opening, 1-1/2 inch face frame construction, and your slide choice for a 5/8 inch sidewall and drawer front. If those points match your cabinet, this two-tiered drawer box replacement gives you organized utensil storage while keeping your existing drawer front in place.
Sold In: 1 Each