Rev-A-Shelf maple cutlery drawer adds organized utensil storage to an existing cabinet drawer opening with a pre-assembled two-tier design. This wood drawer system is made by Rev-A-Shelf Corporation and is built from maple wood with a clear coat finish for durability. The unit is designed as a replacement drawer box for a 21 inch cabinet with an 18 inch opening, and it is intended for 1-1/2 inch face frame cabinet construction only. This drawer without slides lets installers supply their own slides for a 5/8 inch sidewall and drawer front. Adjustable door mount brackets are included and required for operation, and the top tier slides back inside the cabinet on ball-bearing drawer slides once proper slides are added.
Key specs to confirm: This wood drawer system is a 17-1/2 inch wide maple cutlery drawer designed for a 21 inch cabinet with an 18 inch opening. It is for 1-1/2 inch face frame cabinet construction only. The product data also states that buyers must add their own slides for a 5/8 inch sidewall and drawer front, so slide compatibility and side clearance should be checked before purchase. Because this is a door mount cutlery drawer, confirm that the cabinet door and existing drawer front can be attached as required. Load rating, compliance details, and any unlisted dimensional tolerances should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled maple wood drawer box with a clear coat finish and adjustable door mount brackets. Drawer slides are not included. The unit is intended to accept your existing cabinet drawer front.
What to verify before ordering: Confirm cabinet width, opening size, face frame construction, sidewall thickness, drawer front fit, and the slides you plan to use. Also verify that your cabinet layout allows the top tier to slide back inside the cabinet during use.
A two-tier cutlery drawer is useful when a kitchen has limited base cabinet space but still needs better utensil organization. Instead of adding another drawer bank, this replacement drawer box uses the existing cabinet drawer opening and creates upper and lower storage within the same footprint. For remodel work, that can help preserve the cabinet exterior while improving function inside.
This Rev-A-Shelf maple cutlery drawer is built for buyers who already know the cabinet size they need to fit. The product is designed for a 21 inch cabinet with an 18 inch opening, and it is made for 1-1/2 inch face frame cabinet construction only. That makes fit confirmation the first step. If the cabinet does not match those conditions, the buyer should stop and verify another size or style rather than trying to force the installation.
Installers often look for a replacement drawer box when the original drawer wastes vertical space or does not organize flatware well. Here, the pre-assembled wood drawer system reduces fabrication work because the drawer box is already built. The top tier slides back inside the cabinet on ball-bearing drawer slides, which allows access to the lower section once the correct slides are installed. Since this is a drawer without slides, the installer has flexibility but also needs to confirm slide compatibility for a 5/8 inch sidewall and drawer front.
The included adjustable door mount brackets matter in another common scenario: keeping the cabinet front aligned with the new drawer system. The product data states those brackets are included and required for operation. Buyers should also note that the existing cabinet drawer front attaches to this unit, which helps maintain a consistent finished appearance across the kitchen. For a cutlery drawer for face frame cabinet applications, that can be a practical way to upgrade storage without replacing visible cabinet parts.
If you are ordering for a service call or planned kitchen update, measure the cabinet drawer opening carefully, check the face frame construction, and confirm the motion path for the upper tier. Those steps are more important than comparing broad style claims, because this product's value depends on proper fit and correct installation.
A basic single-level drawer box gives one open storage area. This wood drawer system is different because it adds a second tier for better use of vertical space. For buyers trying to organize cutlery and kitchen tools in one cabinet, that layout can reduce clutter and make sorting easier.
Another difference is installation approach. Some drawer products arrive with slides included, while this model is sold as a drawer without slides. That can be helpful when a shop or installer wants to choose slides already used on the project, but it also means the buyer must confirm the correct hardware before ordering. The product data specifically notes use with a 5/8 inch sidewall and drawer front, so that detail should be checked against the cabinet and the selected slides.
Compared with a generic unfinished drawer box, the Rev-A-Shelf unit is described as fully assembled maple wood construction with a clear coat finish. That gives the buyer a ready-to-install drawer body rather than a kit that still needs assembly. The included adjustable door mount brackets also set this product apart from drawer boxes that are not intended for door-mounted operation.
For reliability in planning, the most useful facts are the verified ones: cabinet size target, opening size, face frame requirement, included brackets, and the need to supply slides. Those details help a professional installer or serious DIY buyer decide whether this maple cutlery drawer fits the project. When any remaining dimension, load, or hardware question is not listed, the safe step is to confirm it with manufacturer documentation before installation.
This Rev-A-Shelf maple cutlery drawer is designed for a 21 inch cabinet with an 18 inch opening.
This drawer without slides does not include drawer slides, so the buyer must supply them.
This cutlery drawer for face frame cabinet use is for 1-1/2 inch face frame cabinet construction only.
This replacement drawer box is designed so you can attach your existing cabinet drawer front to the unit.
This door mount cutlery drawer includes adjustable door mount brackets, and they are required for operation.
This wood drawer system is described as using your own slides for a 5/8 inch sidewall and drawer front.
The top tier slides back inside the cabinet on ball-bearing drawer slides after compatible slides are installed.
This Rev-A-Shelf drawer box is pre-assembled and fully assembled from maple wood.
This maple cutlery drawer requires you to confirm cabinet width, opening size, face frame style, side clearance, and slide compatibility. Follow manufacturer installation guidance and local building requirements where applicable.
Replacement drawer box planning is easier when the fit points are clear. This Rev-A-Shelf maple cutlery drawer gives you a fully assembled two-tier wood drawer system with adjustable door mount brackets included, but it does not include slides. Before purchase, confirm that your cabinet is a 21 inch cabinet with an 18 inch opening, that it uses 1-1/2 inch face frame construction, and that your selected slides match the 5/8 inch sidewall and drawer front requirement. Those checks help you order the right drawer for a clean installation.
Sold In: 1 Each