Rev-A-Shelf 4WTCD Series 28"W Maple Cutlery Drawer, Door Mount - 4WTCD-724HFL-1

Choose a Rev-A-Shelf maple cutlery drawer

Rev-A-Shelf maple cutlery drawer is a pre-assembled wood drawer system made to add organized storage inside a kitchen cabinet drawer opening. This Rev-A-Shelf two-tiered cutlery drawer is built from maple wood with a clear coat finish and is designed for frameless cabinet construction only. The upper tier slides back into the cabinet on ball-bearing drawer slides, helping you use vertical drawer space that often goes unused. This door mount cutlery drawer is intended for a 30 inch frameless cabinet with a 28.5 inch opening, and adjustable door mount brackets are included because they are required for operation. Drawer slides are not included, so buyers can match their own hardware for a 5/8 inch sidewall and drawer front setup.

See how this wood drawer system helps

• Two-tiered drawer design - Adds a second storage level so cutlery and small utensils can be separated without taking more cabinet width.
• Pre-assembled drawer box - Reduces installation time because the Rev-A-Shelf drawer arrives ready to fit into an existing drawer opening.
• Maple wood construction - Gives the wood drawer system a durable cabinet-grade build suited to everyday kitchen use.
• Clear coat finish - Helps protect the maple drawer box surface and supports easier cleanup in a busy kitchen.
• Top tier slides back on ball-bearing drawer slides - Improves access to lower storage areas while keeping the upper tray inside the cabinet.
• Designed for frameless cabinets only - Helps buyers match the drawer system to the correct cabinet construction before ordering.
• Fits a 30 inch frameless cabinet with a 28.5 inch opening - Gives installers a verified target application for cabinet sizing and opening width.
• Adjustable door mount brackets included and required - Supports proper operation when attaching the existing cabinet drawer front to the unit.
• Drawer slides not included - Lets the installer choose compatible slides for a 5/8 inch sidewall and drawer front configuration.

Confirm frameless cabinet cutlery drawer fit

Key specs to confirm: This frameless cabinet cutlery drawer is designed for a 30 inch frameless cabinet with a 28.5 inch opening. Buyers should confirm the cabinet is frameless, the opening size matches, and the installation will use slides suited for a 5/8 inch sidewall and drawer front. Because this is a door mount cutlery drawer, the drawer front attachment method and bracket placement also matter. Drawer slides are not included, so slide type, extension, and mounting compatibility should be checked before purchase. If load rating, detailed slide requirements, or any compliance information is needed, those details must be confirmed with the manufacturer or technical documentation.

What's included: One fully assembled maple wood two-tiered drawer box with clear coat finish and adjustable door mount brackets. The product is made to replace an existing drawer, and the existing cabinet drawer front attaches to this unit. Drawer slides are not included.

What to verify before ordering: Confirm frameless cabinet construction, a 28.5 inch cabinet opening, fit within a 30 inch cabinet application, your slide choice for a 5/8 inch sidewall and drawer front, and that your existing drawer front can be attached to the included door mount bracket system.

Use a door mount cutlery drawer well

Use a two-tiered cutlery drawer daily

A two-tiered cutlery drawer is useful when a standard single drawer leaves wasted space above spoons, forks, and serving tools. In many kitchens, the lower drawer area becomes crowded while the vertical space above it stays empty. This Rev-A-Shelf maple cutlery drawer addresses that common layout issue by adding an upper tier that slides back inside the cabinet on ball-bearing drawer slides. That movement helps the user reach items stored below without removing trays or using loose organizers.

For a professional installer, this product works as a replacement cabinet drawer when the customer wants more organized storage without rebuilding the cabinet box. The drawer box comes pre-assembled, which can simplify the job compared with building a custom maple drawer box from scratch. For a serious DIY buyer, the main advantage is that the product is already configured as a tiered kitchen drawer organizer within a wood drawer system, so the project focuses on fit, slide selection, and front attachment rather than drawer fabrication.

This door mount cutlery drawer is designed for frameless cabinet construction only, which makes cabinet type the first thing to verify. It is intended for a 30 inch frameless cabinet with a 28.5 inch opening. That application detail is important because many ordering mistakes happen when buyers assume outside cabinet width is the only measurement that matters. The opening size, sidewall setup, and drawer front attachment all affect whether the unit will operate as intended.

Another practical point is slide selection. Drawer slides are not included, and the product description states to add your own slides for a 5/8 inch sidewall and drawer front. If you are replacing an old 30 inch frameless cabinet drawer, confirm that your chosen slides work with this drawer box and with the cabinet interior before ordering. Follow manufacturer installation guidance and local building requirements where applicable.

Compare wood drawer system install factors

When buyers compare a wood drawer system like this one with a basic single drawer or a field-built organizer, the main differences are fit, assembly time, and access. A pre-assembled Rev-A-Shelf drawer box can reduce fabrication work because the maple drawer box is already built and finished. The included adjustable door mount brackets also support the intended operation, since they are required for use with the existing cabinet drawer front.

Compared with a generic insert placed inside a drawer, this frameless cabinet cutlery drawer functions as the drawer system itself, not just as a loose organizer. That matters for buyers who want a cleaner built-in result and a top tier that slides back on ball-bearing drawer slides. Compared with a custom-built replacement, this product gives a defined application from the manufacturer: frameless cabinets only, 30 inch cabinet use, and a 28.5 inch opening. Those verified details make planning easier.

The tradeoff is that the installer must choose compatible slides, because they are not included. Some buyers prefer that flexibility because they can match hardware already used in the project. Others may need to confirm slide requirements before purchase to avoid delays. If exact slide dimensions, load information, or additional technical tolerances are needed for the installation, those should be verified through manufacturer documentation. For buyers who want a ready-made replacement cabinet drawer with maple construction and a built-in two-tier layout, this product offers a direct path as long as the cabinet opening and frameless construction match the stated fit requirements.

Ask fit questions before drawer install

Order the right replacement cabinet drawer

Rev-A-Shelf maple cutlery drawer is a practical choice when you need a pre-assembled replacement cabinet drawer for a frameless kitchen cabinet. The package includes the maple two-tiered drawer box and adjustable door mount brackets, while drawer slides must be supplied separately. Before purchase, confirm the cabinet is frameless, the opening is 28.5 inches within the intended 30 inch cabinet application, and your selected slides match the 5/8 inch sidewall and drawer front setup. Those checks help ensure smooth installation and proper access to both storage tiers.