Nickel Finish And Half-Overlay Soft-Close Precision

The Sugatsune Olympia 360-D26-14T is a concealed European hinge designed for 1/2 inch overlay doors on both face-frame and frameless cabinets, with integrated soft-close and a clean nickel finish.

Key Features

• Integrated soft-close damps the door over its final closing arc so it settles quietly without impact.
• 1/2 inch overlay, half-crank arm positions the door at a partial overlay, the correct geometry for two doors sharing a center partition.
• 105 degree opening angle delivers practical everyday access suited to the half-overlay application.
• Screw-on mounting fastens directly to the cabinet on either face-frame or frameless construction.
• Nickel finish on plated steel coordinates with brushed and polished metal hardware throughout the cabinet run.
• 5-way adjustment allows fine-tuning of door position after installation for an even reveal across every door.

Where This Hinge Belongs

A 1/2 inch overlay positions the door so it covers part of the cabinet side rather than the full panel, and it is the standard geometry when two doors meet on a shared center partition. Each door in the pair takes a half-crank hinge like this one so both arms clear each other and the doors align evenly. The 35mm cup bores into the back of the door at an 11mm depth, the arm mounts to a base plate on the cabinet side, and the hinge connects to that plate with screws. The base plate is sold separately and should be matched to the same Olympia series and your cabinet construction type.

Nickel Finish and Steel Construction

The Olympia hinge is plated steel with a nickel finish, a neutral, light-reflective tone that reads as polished without being high-gloss. It pairs naturally with satin and brushed nickel pulls, knobs, and drawer slides when a consistent hardware story across the cabinet is the goal. The soft-close mechanism is built into the hinge body, so there is no separate damper to source or fit. This hinge is sized for doors in the 15 to 20mm thickness range; for doors thicker than 20mm, a thick-door hinge is the correct choice.

Who Reaches for This Hinge

Cabinet shops running mixed face-frame and frameless work will find this hinge useful because a single SKU covers both construction types, keeping the hardware order straightforward across a varied project list. Designers specifying nickel hardware throughout a kitchen or bath can carry the finish from the visible pulls into the concealed hinges for a coordinated result. Contractors doing replacement work on existing half-overlay doors will recognize the standard 45mm boring pattern, which lines up with most pre-bored doors already in the field. The weight rating of 13.2 lb per pair fits standard overlay cabinet doors in this size class.

Common Questions

A Coordinated Close Across Every Door

Specify the Olympia 360-D26-14T when the job calls for half-overlay doors that close quietly, line up cleanly, and carry a nickel finish from the hardware inside the box out to everything the eye lands on.