Sugatsune Olympia Soft-Close Hinge For Cabinets

Sugatsune Olympia soft-close hinge uses a 5-speed Lapcon adjustable damper, so you can tune the closing action of cabinet doors, which helps deliver consistent soft-closing performance across different door sizes and weights. This concealed cabinet hinge provides 105 degree opening, giving doors a wide swing for easy cabinet access while keeping the hinge hidden when the door is closed. The hinge is designed for standard door thickness, so it suits common cabinet builds without calling for special door construction. It supports a load capacity of 6 kg, or 13.2 lbs, per 2 pieces and 10 kg, or 22 lbs, per 3 pieces, which helps you plan how many hinges to use on a given door. Maximum door width of 600 mm, or 23-5/8 inches, and maximum door thickness of 20 mm, or 13/16 inch, define the working envelope for door sizing.

Key Olympia Hinge Details That Save Time

• Sugatsune 105 degree Olympia hinge is a concealed cabinet hinge, so it maintains a clean exterior look on the cabinet while still allowing full, smooth operation on the inside.
• The 5-speed Lapcon adjustable damper lets you adjust closing speed, helping you match the soft-close feel across multiple doors on the same run of cabinetry.
• Load capacity of 6 kg, or 13.2 lbs, per 2 pieces and 10 kg, or 22 lbs, per 3 pieces guides hinge quantity for each door, supporting predictable performance on doors within these weight ranges.
• Maximum door width of 600 mm, or 23-5/8 inches, and maximum door thickness of 20 mm, or 13/16 inch, frame the hinge application range so door layouts can be planned within tested limits.
• Clip on type design supports easy installation, because the hinge can be clipped to the mounting plate during hanging, which helps speed up door fitting and adjustment.
• 3-way adjustment with the door installed allows fine-tuning alignment after hanging, so gaps and reveals can be dialed in without removing the door from the hinge.
• The Sugatsune Olympia hinge successfully passed a 200,000 cycles test, demonstrating long-term opening and closing performance within its tested door size and weight parameters.

Olympia Hinge Fit, Overlay, And Adjustment Use

The SAP description identifies this model as an Olympia hinge with 9 mm overlay and 105 degree opening, which defines how the door overlays the cabinet front and how far the door can swing open in service. As a concealed cabinet hinge in the European standard hinge class, it is suited to applications where hidden hardware is preferred while maintaining a familiar cup-and-arm style layout for drilling and mounting. Three-way adjustment with the door installed means the hinge supports alignment corrections after the case is set, so installers can bring doors into plane by turning the built-in adjusters instead of re-drilling. The clip on type construction also helps during fit-out, because doors can be attached or removed from the mounting plates quickly during jobs that demand repeated fitting, spraying, or hardware tweaks.

Working With This 360-D26-9T Olympia Hinge

Cabinet Applications And Door Sizing Details

The Web description states that Sugatsune 105 degree Olympia hinges are designed for standard door thickness, and that the maximum door thickness is 20 mm, or 13/16 inch, which anchors this hinge squarely in common cabinet door construction. The same description specifies a maximum door width of 600 mm, or 23-5/8 inches, so doors within this span are suited to the hinge geometry and soft-close function. Load capacity of 6 kg, or 13.2 lbs, per 2 pieces and 10 kg, or 22 lbs, per 3 pieces helps you match door weight to hinge count, so tall or heavier doors can be supported by stepping up to three hinges as indicated. Because this is a concealed cabinet hinge in the European standard hinge category, it works in layouts where a clean cabinet face is desired and where the interior can accept the hinge cup and arm profile during opening.

Soft-Close Performance, Adjustment, And Durability

The 5-speed Lapcon adjustable damper described for Sugatsune 360 Olympia hinges allows tuning the soft-close action, which helps control how quickly or slowly the door closes against the frame. This is valuable when door sizes vary, because heavier or wider doors can be matched to lighter ones by altering the damper setting for a consistent feel. Three-way adjustment with the door installed also comes into play after the case is square, since it enables side, height, and depth corrections from the hinge body, which reduces rework on the cabinet shell. The clip on type feature simplifies repeated fit checks, because doors can be clipped on and off the mounting plates during finishing or room fit-out. Finally, the hinge has successfully passed a 200,000 cycles test, which indicates it has been operated through a high number of openings and closings, supporting its use in frequently accessed cabinets that see daily operation.

Common Questions About The Olympia Hinge 360-D26-9T

Select The Olympia Hinge For Soft-Close Control

The Sugatsune Olympia soft-close hinge with 5-speed Lapcon adjustable damper, 105 degree opening angle, and 3-way adjustment offers a concealed solution for cabinet doors within the stated width, thickness, and load ranges. Its clip on type design supports efficient hanging and alignment on site, which suits both professional shops and serious DIY installers. For cabinets built around standard door thicknesses and European concealed hinge layouts, this Olympia concealed cabinet hinge brings soft-close control and tested cycle performance into everyday use. Choose this 360-D26-9T Olympia hinge when a hidden hinge with defined door size, weight, and motion parameters fits the cabinet project requirements.