Right-Hand Soft-Close Undermount for 400mm Frameless Drawers

The Hettich Quadro V6 400mm right-hand undermount drawer slide is a full-extension, soft-close slide built for frameless cabinet installations. It mounts beneath the drawer box and stays completely hidden when the drawer is open, while its integrated soft-close damper settles the drawer shut silently at the end of every close.

Key Features

• Full extension brings the entire drawer out to the cabinet face, making the full depth of the box reachable.
• Integrated soft-close catches the drawer near the end of travel and closes it silently without a snap or slam.
• 90 lb weight capacity handles a heavily loaded kitchen or bath drawer with confidence.
• Ball bearing construction delivers smooth, consistent travel under load across the life of the drawer.
• Right-hand orientation — sold as a single cabinet member; pair with the matching left-hand member to complete one drawer.
• Zinc finish over steel provides lasting corrosion resistance for dry indoor cabinet environments.

Where This Slide Fits the Work

A 400mm slide suits drawers built to a 400mm nominal length, which falls in the range typical of base cabinet drawers, bathroom vanity pull-outs, and bedroom case goods. At full extension, the entire box clears the cabinet opening so nothing at the back of the drawer is out of reach — a meaningful difference from 3/4-extension alternatives, especially in deeper base cabinets where pots, pans, or folded linens tend to migrate toward the rear. The 90 lb capacity is rated per pair, covering the kind of loaded drawer that takes daily heavy use without compromising the slide's motion over time.

Construction and Fit

The Quadro V6 is a steel, ball-bearing slide with a zinc finish sized for frameless cabinet construction — the slide mounts directly to the flat interior side panel without rear brackets. The nominal slide length is 15-3/4 inches (400mm), and the cabinet must have a minimum interior depth of 16-3/4 inches to give the slide its required clearance. Drawer side thickness must fall between 1/2 inch and 5/8 inch; the maximum side thickness the slide accepts is 5/8 inch. The drawer box must be built to the Quadro V6 specification, including the rear notch and any locking device drilling the installation requires. Because this is a Quadro V6 component, rear brackets, locking devices, and adjustment hardware are Quadro V6-specific and do not interchange with other Hettich runner series or other brands.

Who Orders This Slide

Cabinet shops running frameless production lines choose the Quadro V6 for its integrated soft-close and predictable 4D adjustment — the undermount format keeps the box interior clean and the hardware invisible, which matters when the drawer front is the design statement. Designers specifying premium residential kitchens and bath vanities reach for full-extension undermounts because clients expect to reach the full drawer depth without hunting. Contractors working on frameless renovation work appreciate a slide that drops into a flat interior without the rear bracket step required in face-frame construction. This is an indoor, dry-environment slide; it is not suited for exterior or high-moisture applications.

A Concealed Slide That Holds Its Own Under Load

The Quadro V6 400mm right-hand slide gives frameless cabinet builds a full-extension, soft-close undermount that stays hidden, handles real weight, and adjusts precisely — right-hand member ready to pair with its left-hand match and go to work.