Hettich Quadro V6 Undermount Drawer Slide for Frameless Cabinet Production

The Hettich Quadro V6 is a 400mm (15-3/4 inch nominal) full-extension soft-close undermount slide, sold here as the left-hand member for bulk production ordering. Ball bearing construction, zinc finish, and a 90 lb per pair rating make it a reliable workhorse for frameless cabinet shops building to consistent drawer specifications.

Key Features

• Full extension brings the entire drawer box out to the cabinet face, putting rear contents within easy reach.
• Integrated soft-close catches the drawer near the end of travel and settles it shut silently every time.
• Ball bearing carriage delivers a smooth, precise pull under load across the full travel range.
• Left-hand orientation sold as a single member, allowing shops to stock lefts and rights independently by volume.
• 90 lb weight capacity per pair covers standard kitchen and bath drawer loads with confidence.
• Zinc finish on steel provides durable indoor corrosion resistance without adding visual bulk inside the cabinet.

Matching the Slide to Your Drawer and Cabinet

This slide is designed for frameless cabinet construction, where it mounts directly to the cabinet side panel. It accepts drawer boxes with sides between 1/2 inch and 5/8 inch (16mm) thick. The cabinet interior must be at least 16-3/4 inches deep to clear the slide and any rear hardware at this 400mm nominal length. Build the drawer box to Hettich's published specification for the Quadro V6 series — nominal length, correct box width, bottom recess, rear notch, and the drilling pattern for Quadro-specific front locking devices. An off-spec box will not seat correctly on this system.

Materials, Finish, and Motion

Steel members with a zinc finish handle the demands of daily residential and light commercial use in dry indoor environments. The ball bearing carriage runs in formed steel raceways, keeping travel consistent under varying load. The integrated soft-close damper is built into the slide itself, so no separate add-on is needed. Because the Quadro V6 mounts beneath the drawer box and stays fully concealed when the drawer is open, the zinc finish serves a functional rather than decorative role.

Who Orders This Configuration

Production cabinet shops are the natural fit here. Buying left-hand and right-hand members as separate bulk SKUs lets a shop dial in its stock levels precisely — no overstocking one side while running short on the other. The Quadro V6 suits standard kitchen drawers, bath vanity drawers, and furniture applications where 1/2 to 5/8 inch drawer sides are the shop standard and frameless construction is the norm. For 3/4 inch drawer sides, a different Quadro version is required; the 5/8 inch side-thickness models are not interchangeable with the 19mm versions.

Frequently Asked Questions

Reliable Production Inventory for Frameless Drawer Work

Stocking the Hettich Quadro V6 left-hand member alongside its right-hand counterpart gives a frameless cabinet shop the flexibility to build consistent, soft-close concealed drawers without the guesswork of matched-pair packaging.