Hettich Quadro V6 Undermount Drawer Slide For Frameless Cabinets — Right Hand, 520mm

This is the right-hand member of the Hettich Quadro V6 concealed undermount system in the 520mm nominal length — a full-extension, ball-bearing runner with integrated soft-close, rated 90 lb per pair, built for frameless cabinets and drawer boxes with 1/2 to 5/8 inch sides. It sells as a single handed member; pair it with the matching left-hand slide to complete one working drawer installation.

Key Features

• Right-hand single member: sold individually as the right-hand slide — pair with the left-hand Quadro V6 520mm to make one functional set.
• Full extension: the entire drawer box travels out to the cabinet face, putting the back of the drawer within reach.
• Integrated soft-close: a damper catches the drawer near the end of travel and settles it shut quietly with no extra mechanism to add.
• Ball-bearing carriage: steel ball bearings in full-length raceways deliver a precise, smooth pull under load across years of cycling.
• 90 lb capacity per pair: sized for loaded kitchen and bath drawers in residential and light-commercial work.
• Zinc finish on steel: a functional, durable finish suited to the concealed, indoor mounting position beneath the drawer box.

Where This Slide Belongs in a Frameless Build

The Quadro V6 mounts directly to the flat interior side panel of a frameless cabinet — no face frame, no rear bracket requirement. It is the right choice when a clean, handle-less or minimalist aesthetic is the goal and the box needs to travel its full 520mm length out to the opening. Frameless production shops running the 32mm system will find the mounting pattern slots into the line-bored panel without extra layout work. This is not a face-frame slide; face-frame applications require a different configuration with rear mounting support.

Build the Box to the Quadro V6 Specification

Like all undermount systems, the Quadro V6 is engineered around a specific drawer box. The box must be built to Hettich's published specification for this series: nominal 520mm length (approximately 20-15/32 inches), correct box width for the slide's side clearance, bottom recess, rear notch, and drilling for the Quadro V6 front locking devices. The slide accepts drawer sides from 1/2 inch to 5/8 inch (12.7 to 16mm) thick. A box built to an off-spec width, a wrong-thickness side, or without the rear notch will not seat correctly on the runners. The minimum installation depth is 21-15/32 inches — confirm the cabinet interior is deep enough before ordering. Front locking devices are series-specific Quadro V6 accessories; confirm whether they are included with this SKU or need to be ordered separately.

Who Orders This Slide

Production cabinet shops building frameless boxes at scale use bulk handed singles because it lets them stock left and right members in the quantities the run demands, rather than opening matched pairs for every drawer. Custom builders and installers working on a frameless renovation find the 520mm length well suited to standard 21-inch-depth base cabinets, covering kitchen drawers, bath vanity drawers, and shallow utility drawers where full rear access matters. The 90 lb per pair rating covers most residential drawer loads comfortably.

Frequently Asked Questions

The Right Runner Keeps the Drawer Moving

Match this right-hand Quadro V6 with its left-hand counterpart, build the box to spec, and the drawer runs quietly at full extension through years of daily use — with soft-close settling it shut every time.