Hettich Quadro V6 Undermount Drawer Slide For Left-Side Frameless Cabinet Installs

This is the left-hand member of Hettich's Quadro V6 undermount system in the 420mm nominal length — a concealed, full-extension runner with integrated soft-close, rated 90 lb per pair, and built for frameless cabinets with 1/2 to 5/8 inch drawer sides. Pair it with the matching right-hand Quadro V6 slide to make one complete, working set.

Key Features

• Full extension brings the entire drawer box out to the cabinet face, giving unobstructed access to the back of the drawer.
• Integrated soft-close catches the drawer near the end of travel and settles it shut without a slam.
• Ball-bearing carriage delivers a smooth, precise pull under load across the drawer's full travel.
• 90 lb weight capacity per pair handles loaded kitchen, bath, and utility drawers with room to spare.
• Left-hand orientation — this slide mounts on the left side of the cabinet; one left-hand and one right-hand slide make a complete pair.
• Zinc-finished steel construction holds up to years of indoor service behind closed cabinet doors.

Where the Quadro V6 Earns Its Place

The 420mm nominal length suits drawer boxes running in the 16 to 17 inch depth range in modern frameless cabinetry. That puts it squarely in the zone for standard kitchen base drawers, bathroom vanity drawers, and the mid-depth utility drawers common in production residential work. The minimum installation depth is 17-1/2 inches, so confirm the cabinet's interior depth before ordering. Because this is a full-extension slide, every inch of the drawer box comes out to the face — practical for spice drawers, utensil drawers, or any application where reaching the back matters.

Construction and Finish

The Quadro V6 runs on steel ball bearings in formed raceways, giving it a consistent, load-bearing feel across the full range of travel. The zinc finish over steel is a functional, corrosion-resistant choice suited to indoor cabinetry — the slide stays hidden beneath the drawer box, so appearance is secondary to durability. The soft-close mechanism is integrated into the slide body, with no add-on damper to install separately or replace.

Who Builds With This Slide

Production cabinet shops running frameless casework are the primary audience. The Quadro V6's ball-bearing precision and integrated soft-close make it a reliable specification for mid-volume residential kitchens and bath vanities where consistent drawer action matters on every box. Designers specifying handle-less or minimal-hardware fronts appreciate the concealed-runner look; contractors appreciate that the soft-close is already built in and requires no additional components to activate. This slide suits boxes with 1/2 to 5/8 inch drawer sides — the standard thickness for dovetailed and doweled production drawer boxes.

The Right Concealed Runner for Frameless Production Work

Match this left-hand Quadro V6 with its right-hand counterpart, build the box to spec, and add the series locking devices — and you have a full-extension, soft-close concealed runner ready for the demands of daily residential use.