Ball Bearing Precision And a Right-Hand Fit for Frameless Cabinetry

The Hettich Quadro V6 420mm soft-close undermount slide is the right-hand member of a concealed, full-extension runner pair engineered for frameless cabinets with drawer sides from 1/2 to 5/8 inch thick. Running on ball bearings and rated 90 lb per pair, it delivers a smooth, controlled pull and a damped silent close — hidden entirely beneath the drawer box when the drawer is open.

Key Features

• Right-hand ball bearing member — pairs with the matching left-hand Quadro V6 slide to form one complete, working undermount set.
• Full extension — the drawer travels the full nominal length, bringing the entire box out to the cabinet face for unobstructed access.
• Integrated soft-close — a built-in damper catches the drawer near the end of travel and settles it shut without noise or impact.
• 90 lb capacity per pair — sized for loaded kitchen, bath, and utility drawers within a frameless cabinet layout.
• Frameless cabinet design — mounts directly to the cabinet side panel, suited to 32mm system production and European-style box construction.
• Steel construction with zinc finish — a functional, corrosion-resistant finish for years of indoor service.

Where This Slide Earns Its Keep

Frameless production shops running European-style boxes will find the Quadro V6 a natural fit. The slide mounts straight to the cabinet side on the 32mm system hole pattern — no face frame to navigate, no rear bracket to source separately. It suits the standard drawer depths of base cabinets and bath vanities built around metric nominal lengths, and the 420mm nominal length (with a 17-1/2 inch minimum installation depth) covers the typical 16-inch interior depth box common in metric production runs. At 90 lb per pair, it handles everything from a lightly loaded spice drawer to a full pot pull-out without stepping up to a heavier-duty class.

Construction and Finish

The Quadro V6 runs on hardened steel ball bearings in full-length raceways, which accounts for the smooth, consistent pull even when the drawer carries a real load. Ball-bearing construction holds its feel over time better than roller-only systems under repeated cycling. The zinc plating over steel is an indoor-service finish — it protects against the humidity and temperature swings of a kitchen or bath environment, but this slide is not rated for wet or exterior exposure. The concealed mounting means the zinc finish stays hidden beneath the box in everyday use.

Who Should Order This Slide

This is the right choice for cabinet shops and installers working in frameless construction who want a concealed undermount with ball-bearing travel and soft-close motion. It suits designers specifying European-style kitchens and baths where hardware disappears behind flat-front and inset-style doors. Homeowners doing a careful renovation who are building or replacing drawer boxes in frameless cabinets will find the 420mm length fits the metric nominal sizing of most European-originated cabinet lines. This slide is the right-hand member only — it is not a complete pair on its own.

The Right Member for the Right Job

Pair this right-hand Quadro V6 slide with its left-hand mate, build the drawer box to Hettich's specification, and the installation goes in straight — full extension, silent close, and nothing showing beneath the box.