Hettich Quadro V6 Drawer Slide For Smooth Undermount Action

Hettich Quadro V6 drawer slide is a soft-close, full extension undermount drawer slide that supports precise, controlled drawer travel, which helps drawers run smoothly in everyday cabinet use. The 280mm length defines the slide depth, which matters when matching the slide to cabinet carcase and drawer box dimensions. The left hand design follows the Hettich 9245349 specification, which supports accurate ordering and pairing with the matching right hand slide. The integrated Silent System provides a soft-close function, which slows the drawer at the end of travel and reduces impact at closure. The slide uses galvanised steel construction, which resists corrosion and supports durability in typical woodworking shop and cabinet environments. Ball bearing guidance is built into this undermount slide, which supports even running under load and helps maintain stable motion over the life of the installation.

Key Quadro 4D V6 Details For Cabinet Projects

• The soft-close Silent System is integrated into the slide, which manages closing speed and helps drawers return gently against the front, supporting quieter kitchens and workspaces.
• Full extension travel allows the drawer to open its full length, which improves access to stored items and lets installers align internal dividers or organizers to the complete drawer depth.
• Load capacity up to 30 kg for standard applications defines how much weight the slide is designed to carry, which supports planning for typical kitchen, bath, and utility drawer contents.
• A version for particularly light drawers up to 10 kg is referenced, which highlights that the Quadro V6 system can be matched to lighter drawer constructions where lower loads are expected.
• Undermount configuration places the slide beneath the drawer box, which leaves cabinet sides clean and supports a concealed hardware look valued in many cabinetry projects.

Undermount Slide On Installation And 4D Adjustments

Convenient slide on installation with 4D catches provides a defined connection method between drawer and slide, which supports repeatable fitting when building multiple cabinets of the same design. Tool-less, intuitive adjustment of the drawer front panel lets the installer adjust the front without separate tools, which can speed on-site fitting and reduce time spent fine-tuning reveals. Height adjustment up to plus 2mm allows the front to be raised slightly, which helps align horizontal lines across a bank of drawers. Side adjustment up to plus or minus 1.5mm (with maximum drawer side profile thickness 15mm) gives room to shift the front sideways, which helps achieve even gaps between adjacent fronts. Depth adjustment up to plus or minus 2mm supports setting the front flush to the cabinet face, which is important when aligning with doors or neighboring units. Tilt adjustment supports correcting small angular deviations, which helps square the front relative to the cabinet.

How This Quadro 4D V6 Slide Performs In Use

Where This Hettich 9245349 Slide Is Typically Applied

The SAP description "QUADRO 4D V6 SLIDE W/SISY,280MM,LH" identifies this part as a Quadro 4D V6 slide with Silent System, which positions it for drawer applications where soft closing and precise alignment are needed. The load capacity to EN 15338, Level 3 defines the tested performance level, which matters when a project specifies slides based on that European standard. The undermount drawer slides product class indicates the slide belongs to a category used in cabinetry and furniture where hidden runners are preferred. Ball bearing guidance within the Hettich Quadro V6 system supports stable operation under repeated opening and closing, which is important in high-use applications such as kitchen base cabinets or utility storage. The 280mm length again sets the design envelope, which directly influences drawer depth decisions in a run of cabinets sharing the same hardware family.

Adjustment, Load, And Silent System For Consistent Results

Tool-less 4D drawer adjustment in height, side, depth, and tilt lets the installer tune the front position in four directions, which helps achieve precise front alignment across multiple units without remaking drawer boxes. Height adjustment up to plus 2mm supports minor corrections when the carcase or faces vary slightly, which can occur in site-built or large installations. Side adjustment up to plus or minus 1.5mm allows compensation when cabinet openings are tight, which helps maintain consistent gaps between fronts even with small dimensional variances. Depth adjustment up to plus or minus 2mm provides room to fine-tune how far the drawer front stands relative to the cabinet, which is critical when working with integrated handles or overlay designs. Tilt adjustment offers another plane of control, which helps correct racking so that the front sits square to adjacent fronts. The integrated Silent System soft-close function works with these adjustments by drawing the drawer in at the end of travel, which supports a controlled, repeatable close after alignment is set. Load capacity up to 30 kg for standard applications ties the slide to typical storage loads, which helps match it to drawers holding everyday contents rather than unusually heavy items.

Common Questions About This Quadro 4D V6 Slide

Selecting This Quadro 4D V6 Slide For Your Drawers

This soft-close full extension undermount slide combines the Quadro 4D V6 runner, Silent System, and tool-less adjustment, which supports accurate alignment and controlled closing in finished cabinetry. The 280mm length and left hand designation define its role within a pair, which helps coordinate with drawer depth and hardware layout. Load capacity up to 30 kg for standard applications sets its use range, which fits many kitchen, bath, and furniture drawers using undermount runners. For projects calling for a galvanised steel undermount solution with structured 4D adjustment, this Hettich Quadro V6 drawer slide aligns the hardware details with practical installation needs.