Left-Hand Precision and Full-Extension Access for Frameless Builds

The Hettich Quadro V6 is a 550mm (21-5/8 inch nominal) soft-close, full-extension undermount drawer slide sold as a left-hand cabinet member. Designed for frameless cabinet construction, it mounts beneath the drawer box and stays hidden when the drawer is open, delivering quiet, controlled closes and complete access to the drawer's contents. Pair it with the matching right-hand member to complete one drawer installation.

Key Features

• Full extension brings the entire drawer out to the cabinet face so the back of the box is fully reachable.
• Integrated soft-close catches the drawer near the end of travel and settles it shut without slamming.
• 4D adjustment lets the installed drawer front be trued in height, side, depth, and tilt after hanging.
• 90 lb weight capacity handles heavily loaded kitchen and utility drawers with confidence.
• Ball bearing construction on steel members provides smooth, consistent travel over years of daily use.
• Left-hand orientation — this is one cabinet member; one left-hand and one right-hand unit make a complete drawer pair.

Where This Slide Fits the Work

A 550mm slide suits drawers built to a nominal 550mm length, which maps to cabinet interiors in the 22-inch depth range — a common dimension in base cabinet and pantry pull-out work. Full extension is the right choice when the drawer carries items that get buried at the back: spice pull-outs, deep utility drawers, file drawers, and base cabinets where the back inch of storage actually needs to be reachable. The 90 lb rating keeps this slide well within spec for a loaded pots-and-pans drawer or a well-stocked utensil pull-out, and the soft-close damper makes it a natural fit for any kitchen or bath application where noise control matters.

Construction and Finish

The Quadro V6 runs on steel ball bearings within steel members finished in zinc — a functional, corrosion-resistant finish suited to the concealed, dry-interior environment of a finished frameless cabinet. The zinc coating protects the steel through years of indoor service without adding bulk to the profile. Because this is an undermount design, the slide sits beneath the drawer box and is invisible in use; only the drawer bottom and box sides are visible when the drawer is open. The slide requires a minimum installation depth of 22-5/8 inches, so confirm the cabinet interior depth before ordering.

Who Builds with the Quadro V6

Cabinet shops running frameless production lines will find the Quadro V6 straightforward to spec and install: it mounts directly to the flat interior side of a frameless panel, no rear bracket required. The 4D front adjustment is especially useful in production environments where drawer fronts need to be aligned quickly and consistently after the box is loaded. Designers specifying concealed undermounts for a clean interior aesthetic get full-extension access and integrated soft-close without visible hardware. The 1/2 to 5/8 inch drawer side thickness range accommodates both standard 1/2 inch plywood drawer sides and the slightly thicker 5/8 inch stock common in higher-end drawer box construction.

The Right Member for the Left Side of Every Drawer

When frameless cabinet work calls for a concealed, soft-close, full-extension slide at the 550mm length, the Quadro V6 left-hand member delivers the adjustment range, load capacity, and finish quality the job requires — pair it with its right-hand counterpart and the correct locking devices to complete the installation.