Omega National 30"W Hickory Signature Straight Wall Mount Range Hood, Broan Compatible Liner Included - R2130SMB1HUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2130SMB1HUF1 to RSR2130SMB1HUF1.

Omega National Hickory Range Hood For Wall Installs

Omega National hickory range hood is a 30 inch Signature flat valance wall mount wood range hood system that provides a matching wood focal point over the cooktop, giving cabinet runs a coordinated, built-in look. The system is described as a complete turn-key wood range hood system, which means the hood body and liner are paired to work together so installers do not have to source those core pieces separately. The hood is made from hickory, so it fits projects that call for that specific unfinished wood species before final finishing in the shop or on site. This model sits in Omega National Products wood range hoods line, so it matches that program when laying out multiple widths across a kitchen design.

Key Details That Support Range Hood Projects

• The product is a 30 inch wide Signature hood, so it suits standard 30 inch cooktop or range layouts where the wood hood needs to align with surrounding cabinet widths.
• The hood uses a flat valance design, which keeps the lower front profile straight and simple for jobs that call for a clean, unobtrusive fascia line.
• The hood is identified as wall mount, so it is intended to be hung against a wall run rather than over an island, matching typical residential range locations.
• The system uses hickory as the wood species, allowing the hood to be finished to coordinate with hickory cabinet doors, face frames, or trim in the same kitchen.
• The product is part of a wood range hoods category, so it is designed to sit visually with wood cabinetry rather than exposed metal, helping installers maintain a continuous millwork appearance.
• The hood is made by Omega National Products, so it aligns with that manufacturers program when mixing widths or matching other Omega National wood hood components on the same job.

Wall Mount Hood Installation And Hanging Approach

The Signature hickory wall mount hood is described as a simple installation, featuring a patented French cleat hanging method, so the body is designed to lock onto a cleat rather than rely on complex brackets, which helps installers set the hood at height and level it with straightforward wall preparation. The French cleat hanging method lets the installer fasten the cleat to framing first, then lift the hood onto it, which supports the hood while final adjustments are made. This approach streamlines jobsite workflow because one person can hang and adjust the hood with the hood weight supported on the cleat rather than held in place by hand.

How This Hickory Hood Works In Real Kitchens

Where This 30 Inch Hickory Hood Fits Best

The 30 inch width places this hickory Signature hood directly over standard 30 inch ranges and cooktops, so it lines up with the base cabinet footprint for typical residential kitchens. The wall mount configuration targets layouts where cabinetry and uppers are built along a wall, letting the hood act as a focal cabinet in the run. Because the hood is one of several widths available in the same line - 30, 36, 42, and 48 inches - it can be specified alongside larger matching hoods in open-plan or multi-zone kitchens where consistent styling across different appliance widths is important. The hickory construction supports projects where cabinet boxes, doors, and moldings are also hickory, so the hood can be finished to blend into a unified wood scheme.

Details That Support Reliable Performance And Layout

The silver metallic liner is described as featuring a cut-out that accommodates Broan NPRHVBB20SM (390 CFM) and NPRHVBF10SM (250 CFM) ventilators, so the liner is preconfigured for those two ventilator models, which reduces layout work when sizing the fan opening. Having a pre-cut opening for the specified Broan ventilators helps installers place the ventilator in the correct position inside the hood shell, supporting proper capture area alignment above the cooking surface. The statement that two units are available to choose from - NPRHVBB20SM and NPRHVBF10SM - gives designers airflow and performance options while staying within the same liner footprint. The hood is part of a complete turn-key wood range hood system that specifies a choice of ventilation and chimney sizes, with the chimney sold separately, so installers can match the vertical chase height to the ceiling while keeping the core hood-and-liner combination consistent job to job. The product is made in the USA, which matters on projects that call for domestic manufacturing as part of the specification.

Common Questions About Omega National R2130SMB1HUF1

Select This Hickory Hood For Coordinated Installs

This Omega National hickory Signature 30 inch wall mount wood range hood pairs a turn-key hood-and-liner system with a patented French cleat hanging method and a Broan-compatible silver metallic liner cut-out, so it supports straightforward installation and coordinated cabinet runs on residential kitchen projects.